This is a note to let you know that I've just added the patch titled
parisc: fix serial ports on C8000 workstation
to the 3.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
parisc-fix-serial-ports-on-c8000-workstation.patch
and it can be found in the queue-3.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 9a66d1869d90f13fbaf83dcce5b1aeec86fbc699 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Date: Sun, 9 Jun 2013 23:00:21 +0200
Subject: parisc: fix serial ports on C8000 workstation
From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
commit 9a66d1869d90f13fbaf83dcce5b1aeec86fbc699 upstream.
The C8000 workstation (64 bit kernel only) has a somewhat different
serial port configuration than other models.
Thomas Bogendoerfer sent a patch to fix this in September 2010, which
was now minimally modified by me.
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Signed-off-by: Helge Deller <deller@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/parisc/kernel/hardware.c | 1
drivers/parisc/iosapic.c | 66 +++++++++++++++++++++++++++++++++++++
drivers/tty/serial/8250/8250_gsc.c | 10 +++++
3 files changed, 76 insertions(+), 1 deletion(-)
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_li
{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"},
{HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"},
{HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"},
+ {HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"},
{HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"},
{HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"},
{HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"},
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -811,6 +811,70 @@ int iosapic_fixup_irq(void *isi_obj, str
return pcidev->irq;
}
+static struct iosapic_info *first_isi = NULL;
+
+#ifdef CONFIG_64BIT
+int iosapic_serial_irq(int num)
+{
+ struct iosapic_info *isi = first_isi;
+ struct irt_entry *irte = NULL; /* only used if PAT PDC */
+ struct vector_info *vi;
+ int isi_line; /* line used by device */
+
+ /* lookup IRT entry for isi/slot/pin set */
+ irte = &irt_cell[num];
+
+ DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n",
+ irte,
+ irte->entry_type,
+ irte->entry_length,
+ irte->polarity_trigger,
+ irte->src_bus_irq_devno,
+ irte->src_bus_id,
+ irte->src_seg_id,
+ irte->dest_iosapic_intin,
+ (u32) irte->dest_iosapic_addr);
+ isi_line = irte->dest_iosapic_intin;
+
+ /* get vector info for this input line */
+ vi = isi->isi_vector + isi_line;
+ DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", isi_line, vi);
+
+ /* If this IRQ line has already been setup, skip it */
+ if (vi->irte)
+ goto out;
+
+ vi->irte = irte;
+
+ /*
+ * Allocate processor IRQ
+ *
+ * XXX/FIXME The txn_alloc_irq() code and related code should be
+ * moved to enable_irq(). That way we only allocate processor IRQ
+ * bits for devices that actually have drivers claiming them.
+ * Right now we assign an IRQ to every PCI device present,
+ * regardless of whether it's used or not.
+ */
+ vi->txn_irq = txn_alloc_irq(8);
+
+ if (vi->txn_irq < 0)
+ panic("I/O sapic: couldn't get TXN IRQ\n");
+
+ /* enable_irq() will use txn_* to program IRdT */
+ vi->txn_addr = txn_alloc_addr(vi->txn_irq);
+ vi->txn_data = txn_alloc_data(vi->txn_irq);
+
+ vi->eoi_addr = isi->addr + IOSAPIC_REG_EOI;
+ vi->eoi_data = cpu_to_le32(vi->txn_data);
+
+ cpu_claim_irq(vi->txn_irq, &iosapic_interrupt_type, vi);
+
+ out:
+
+ return vi->txn_irq;
+}
+#endif
+
/*
** squirrel away the I/O Sapic Version
@@ -877,6 +941,8 @@ void *iosapic_register(unsigned long hpa
vip->irqline = (unsigned char) cnt;
vip->iosapic = isi;
}
+ if (!first_isi)
+ first_isi = isi;
return isi;
}
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -30,6 +30,12 @@ static int __init serial_init_chip(struc
unsigned long address;
int err;
+#ifdef CONFIG_64BIT
+ extern int iosapic_serial_irq(int cellnum);
+ if (!dev->irq && (dev->id.sversion == 0xad))
+ dev->irq = iosapic_serial_irq(dev->mod_index-1);
+#endif
+
if (!dev->irq) {
/* We find some unattached serial ports by walking native
* busses. These should be silently ignored. Otherwise,
@@ -51,7 +57,8 @@ static int __init serial_init_chip(struc
memset(&uart, 0, sizeof(uart));
uart.port.iotype = UPIO_MEM;
/* 7.272727MHz on Lasi. Assumed the same for Dino, Wax and Timi. */
- uart.port.uartclk = 7272727;
+ uart.port.uartclk = (dev->id.sversion != 0xad) ?
+ 7272727 : 1843200;
uart.port.mapbase = address;
uart.port.membase = ioremap_nocache(address, 16);
uart.port.irq = dev->irq;
@@ -73,6 +80,7 @@ static struct parisc_device_id serial_tb
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 },
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c },
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d },
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x000ad },
{ 0 }
};
Patches currently in stable-queue which might be from tsbogend@xxxxxxxxxxxxxxxx are
queue-3.9/parisc-provide-pci_mmap_page_range-for-parisc.patch
queue-3.9/parisc-fix-serial-ports-on-c8000-workstation.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html