Re: [PATCH] ARM: EXYNOS: Fix incorrect usage of S5P_ARM_CORE1_* registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19 June 2013 18:54, Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx> wrote:
> On Wed, Jun 19, 2013 at 01:50:57PM +0100, Tomasz Figa wrote:
>> On Wednesday 19 of June 2013 17:39:21 Chander Kashyap wrote:
>> > On 18 June 2013 23:29, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote:
>> > > On 06/19/13 02:45, Tomasz Figa wrote:
>> > >> Ccing Arnd and Olof, because I forgot to add them to git send-email...
>> > >>
>> > >> Sorry for the noise.
>> > >>
>> > >> On Tuesday 18 of June 2013 17:26:31 Tomasz Figa wrote:
>> > >>> S5P_ARM_CORE1_* registers affect only core 1. To control further
>> > >>> cores
>> > >>> properly another registers must be used.
>> > >>>
>> > >>> This patch replaces S5P_ARM_CORE1_* register definitions with
>> > >>> S5P_ARM_CORE_*(x) macro which return addresses of registers for
>> > >>> specified core.
>> > >>>
>> > >>> This fixes CPU hotplug on quad core Exynos SoCs on which currently
>> > >>> offlining CPUs 2 or 3 caused CPU 1 to be turned off.
>> > >>
>> > >> Obviously this doesn't happen currently because of the if (cpu == 1),
>> > >> but>
>> > > Yes, not happened...and just note exynos5440 doesn't support hotplug :)
>> > > so this is available on exynos4412 and added 5420.
>> > >
>> > >> if logical cpu1 turned out not to be physical cpu1, then it would
>> > >> crash.
>> > >>
>> > >> Best regards,
>> > >> Tomasz
>> > >>
>> > >>> In addition,
>> > >>> bring-up of CPU 2 and 3 is fixed on boards where bootloader powers
>> > >>> off
>> > >>> secondary cores by default.
>> > >
>> > > I need to test on board about above...
>> > >
>> > >>> Cc: stable@xxxxxxxxxxxxxxx
>> > >>> Signed-off-by: Tomasz Figa<t.figa@xxxxxxxxxxx>
>> > >>> Signed-off-by: Kyungmin Park<kyungmin.park@xxxxxxxxxxx>
>> > >>> ---
>> > >>>
>> > >>>   arch/arm/mach-exynos/hotplug.c               |  9 +++++----
>> > >>>   arch/arm/mach-exynos/include/mach/regs-pmu.h | 10 +++++++---
>> > >>>   arch/arm/mach-exynos/platsmp.c               |  9 +++++----
>> > >>>   3 files changed, 17 insertions(+), 11 deletions(-)
>> > >>>
>> > >>> diff --git a/arch/arm/mach-exynos/hotplug.c
>> > >>> b/arch/arm/mach-exynos/hotplug.c index af90cfa..c089943 100644
>> > >>> --- a/arch/arm/mach-exynos/hotplug.c
>> > >>> +++ b/arch/arm/mach-exynos/hotplug.c
>> > >>> @@ -93,10 +93,11 @@ static inline void cpu_leave_lowpower(void)
>> > >>>
>> > >>>   static inline void platform_do_lowpower(unsigned int cpu, int
>> > >>>
>> > >>> *spurious) {
>> > >>>
>> > >>>         for (;;) {
>> > >>>
>> > >>> +               void __iomem *reg_base;
>> > >>> +               unsigned int phys_cpu = cpu_logical_map(cpu);
>> > >>>
>> > >>> -               /* make cpu1 to be turned off at next WFI command */
>> > >>> -               if (cpu == 1)
>> > >>> -                       __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
>> > >>> +               reg_base = S5P_ARM_CORE_CONFIGURATION(phys_cpu);
>> >
>> > Tomasz,
>> > This will break for non-zero, MPIDR value.  Say if MPIDR is 1 then for
>> > cpu0 phys_cpu value will be 0x100,
>> > and address calculation will be   (S5P_ARM_CORE0_CONFIGURATION +
>> > ((0x101) * 0x80)), which is wrong.
>
> Honestly, I did not understand the reasoning above, please clarify.
Sorry not non-zero MPIDR but non-zero ClusterID.
All the power register addresses are at offset 0x80.
>
>>
>> Hmm, according to the code initializing __cpu_logical_map[] array this is
>> not true.
>>
>> Here's the code:
>>
>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arm/kernel/setup.c?id=refs/tags/next-20130619#n468
>>
>> and for used macros and bitmasks:
>>
>> https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/arch/arm/include/asm/cputype.h?id=refs/tags/next-20130619#n45
>>
>> Now the structure of the MPIDR register:
>>
>> http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0388e/CIHEBGFG.html
>>
>> As you can see, the value read from the register in
>> smp_setup_processor_id() is only the physical CPU ID, so I don't see any
>> problem here.
>
> Define "physical CPU ID" :-)
>
> There is a problem here: the MPIDR is not an index, and the cpu_logical_map is
> populated in arm_dt_init_cpu_maps in:
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/kernel/devtree.c?id=refs/tags/v3.10-rc6
>
> with all affinity levels.
>
> You need to perform a mapping between logical cpus and registers offset,
> you can't use the cpu_logical_map directly for that.
>
> Next accident waiting to happen is GIC code (CONFIG_GIC_NON_BANKED), where
> cpu_logical_map is used erroneously as an index.
>
> Lorenzo
>



--
with warm regards,
Chander Kashyap
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]