From: Tony Lindgren <tony@xxxxxxxxxxx> This patch has been added to the 4.1 stable tree. If you have any objections, please let us know. =============== [ Upstream commit 58a66dba1beac2121d931cda4682ae4d40816af5 ] If we reload phy-twl4030-usb, we get a warning about unbalanced pm_runtime_enable. Let's fix the issue and also fix idling of the device on unload before we attempt to shut it down. If we don't properly idle the PHY before shutting it down on removal, the twl4030 ends up consuming about 62mW of extra power compared to running idle with the module loaded. Cc: stable@xxxxxxxxxxxxxxx Cc: Bin Liu <b-liu@xxxxxx> Cc: Felipe Balbi <balbi@xxxxxx> Cc: Kishon Vijay Abraham I <kishon@xxxxxx> Cc: NeilBrown <neil@xxxxxxxxxx> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Sasha Levin <sasha.levin@xxxxxxxxxx> --- drivers/phy/phy-twl4030-usb.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index f8c818e..fb9e30e 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -719,6 +719,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, 2000); pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. @@ -762,6 +763,13 @@ static int twl4030_usb_remove(struct platform_device *pdev) /* set transceiver mode to power on defaults */ twl4030_usb_set_mode(twl, -1); + /* idle ulpi before powering off */ + if (cable_present(twl->linkstat)) + pm_runtime_put_noidle(twl->dev); + pm_runtime_mark_last_busy(twl->dev); + pm_runtime_put_sync_suspend(twl->dev); + pm_runtime_disable(twl->dev); + /* autogate 60MHz ULPI clock, * clear dpll clock request for i2c access, * disable 32KHz @@ -776,11 +784,6 @@ static int twl4030_usb_remove(struct platform_device *pdev) /* disable complete OTG block */ twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - if (cable_present(twl->linkstat)) - pm_runtime_put_noidle(twl->dev); - pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put(twl->dev); - return 0; } -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html