Hello.
On 2/21/2016 6:27 PM, Marc Kleine-Budde wrote:
From: Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxxx>
This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.
Signed-off-by: Gerhard Uttenthaler <uttenthaler@xxxxxxxxxxxxxxxx>
Cc: linux-stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
drivers/net/can/usb/ems_usb.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index fc5b75675cd8..eb7192fab593 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -117,6 +117,9 @@ MODULE_LICENSE("GPL v2");
*/
#define EMS_USB_ARM7_CLOCK 8000000
+#define CPC_TX_QUEUE_TRIGGER_LOW 25
+#define CPC_TX_QUEUE_TRIGGER_HIGH 35
+
/*
* CAN-Message representation in a CPC_MSG. Message object type is
* CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or
@@ -278,6 +281,11 @@ static void ems_usb_read_interrupt_callback(struct urb *urb)
switch (urb->status) {
case 0:
dev->free_slots = dev->intr_in_buffer[1];
+ if(dev->free_slots > CPC_TX_QUEUE_TRIGGER_HIGH){
+ if (netif_queue_stopped(netdev)){
+ netif_wake_queue(netdev);
+ }
+ }
Hm, did anyone run scripts/checkpatch.pl on this patch?
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html