4.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Xiangliang Yu <Xiangliang.Yu@xxxxxxx> commit 023113d24ef9e1d2b44cb2446872b17e2b01d8b1 upstream. Current code doesn't update port value of Port Multiplier(PM) when sending FIS of softreset to device, command will fail if FBS is enabled. There are two ways to fix the issue: the first is to disable FBS before sending softreset command to PM device and the second is to update port value of PM when sending command. For the first way, i can't find any related rule in AHCI Spec. The second way can avoid disabling FBS and has better performance. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@xxxxxxx> Signed-off-by: Tejun Heo <tj@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/ata/libahci.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1266,6 +1266,15 @@ static int ahci_exec_polled_cmd(struct a ata_tf_to_fis(tf, pmp, is_cmd, fis); ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); + /* set port value for softreset of Port Multiplier */ + if (pp->fbs_enabled && pp->fbs_last_dev != pmp) { + tmp = readl(port_mmio + PORT_FBS); + tmp &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); + tmp |= pmp << PORT_FBS_DEV_OFFSET; + writel(tmp, port_mmio + PORT_FBS); + pp->fbs_last_dev = pmp; + } + /* issue & wait */ writel(1, port_mmio + PORT_CMD_ISSUE); -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html