4.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx> commit fa89537783cb442263fa5a14df6c7693eaf32f11 upstream. Commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Signed-off-by: Zhuang Jin Can <jin.can.zhuang@xxxxxxxxx> Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-pci.c | 48 ++++++++++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 19 deletions(-) --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -28,7 +28,9 @@ #include "xhci.h" #include "xhci-trace.h" -#define PORT2_SSIC_CONFIG_REG2 0x883c +#define SSIC_PORT_NUM 2 +#define SSIC_PORT_CFG2 0x880c +#define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) @@ -316,28 +318,36 @@ static void xhci_pme_quirk(struct usb_hc struct pci_dev *pdev = to_pci_dev(hcd->self.controller); u32 val; void __iomem *reg; + int i; if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) { - reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2; - - /* Notify SSIC that SSIC profile programming is not done */ - val = readl(reg) & ~PROG_DONE; - writel(val, reg); - - /* Mark SSIC port as unused(suspend) or used(resume) */ - val = readl(reg); - if (suspend) - val |= SSIC_PORT_UNUSED; - else - val &= ~SSIC_PORT_UNUSED; - writel(val, reg); - - /* Notify SSIC that SSIC profile programming is done */ - val = readl(reg) | PROG_DONE; - writel(val, reg); - readl(reg); + for (i = 0; i < SSIC_PORT_NUM; i++) { + reg = (void __iomem *) xhci->cap_regs + + SSIC_PORT_CFG2 + + i * SSIC_PORT_CFG2_OFFSET; + + /* + * Notify SSIC that SSIC profile programming + * is not done. + */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); + } } reg = (void __iomem *) xhci->cap_regs + 0x80a4; -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html