This is a note to let you know that I've just added the patch titled
serial: 8250_pci: Add Intel Broadwell ports
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 6c55d9b98335f7f6bd5f061866ff1633401f3a44 Mon Sep 17 00:00:00 2001
From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Date: Fri, 29 Jan 2016 16:49:47 +0200
Subject: serial: 8250_pci: Add Intel Broadwell ports
Some recent (early 2015) macbooks have Intel Broadwell where LPSS UARTs are
PCI enumerated instead of ACPI. The LPSS UART block is pretty much same as
used on Intel Baytrail so we can reuse the existing Baytrail setup code.
Add both Broadwell LPSS UART ports to the list of supported devices.
Signed-off-by: Leif Liddy <leif.liddy@xxxxxxxxx>
Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_pci.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 4097f3f65b3b..e71ec78fc11e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1379,6 +1379,9 @@ ce4100_serial_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
+#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
+#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
+
#define BYT_PRV_CLK 0x800
#define BYT_PRV_CLK_EN (1 << 0)
#define BYT_PRV_CLK_M_VAL_SHIFT 1
@@ -1461,11 +1464,13 @@ byt_serial_setup(struct serial_private *priv,
switch (pdev->device) {
case PCI_DEVICE_ID_INTEL_BYT_UART1:
case PCI_DEVICE_ID_INTEL_BSW_UART1:
+ case PCI_DEVICE_ID_INTEL_BDW_UART1:
rx_param->src_id = 3;
tx_param->dst_id = 2;
break;
case PCI_DEVICE_ID_INTEL_BYT_UART2:
case PCI_DEVICE_ID_INTEL_BSW_UART2:
+ case PCI_DEVICE_ID_INTEL_BDW_UART2:
rx_param->src_id = 5;
tx_param->dst_id = 4;
break;
@@ -2062,6 +2067,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = byt_serial_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_BDW_UART1,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = byt_serial_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_BDW_UART2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = byt_serial_setup,
+ },
/*
* ITE
*/
@@ -5506,6 +5525,16 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
pbn_byt },
+ /* Intel Broadwell */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
+
/*
* Intel Quark x1000
*/
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html