3.19.8-ckt14 -stable review patch. If anyone has any objections, please let me know.
---8<------------------------------------------------------------
From: Arnd Bergmann <arnd@xxxxxxxx>
commit 6c54809977de3c9e2ef9e9934a2c6625f7e161e7 upstream.
During my randconfig build testing, I found that a kernel with
DEBUG_AT91_UART and ARCH_BCM_63XX fails to build:
arch/arm/include/debug/at91.S:18:0: error: "CONFIG_DEBUG_UART_VIRT" redefined [-Werror]
It turns out that the DEBUG_UART_BCM63XX option is enabled whenever
the ARCH_BCM_63XX is, and that breaks multiplatform kernels because
we then end up using the UART address from BCM63XX rather than the
one we actually configured (if any).
This changes the BCM63XX options to only have one Kconfig option,
and only enable that if the user explicitly turns it on.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Fixes: b51312bebfa4 ("ARM: BCM63XX: add low-level UART debug support")
[ kamal: backport to 3.19-stable: context ]
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
arch/arm/Kconfig.debug | 17 ++++++-----------
1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5ddd490..ae48dc2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -147,10 +147,9 @@ choice
mobile SoCs in the Kona family of chips (e.g. bcm28155,
bcm11351, etc...)
- config DEBUG_BCM63XX
+ config DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART"
depends on ARCH_BCM_63XX
- select DEBUG_UART_BCM63XX
config DEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"
@@ -1203,7 +1202,7 @@ config DEBUG_LL_INCLUDE
default "debug/vf.S" if DEBUG_VF_UART
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
- default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+ default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
default "mach/debug-macro.S"
# Compatibility options for PL01x
@@ -1223,10 +1222,6 @@ config DEBUG_UART_8250
ARCH_IOP33X || ARCH_IXP4XX || \
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
- def_bool ARCH_BCM_63XX
-
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
@@ -1310,7 +1305,7 @@ config DEBUG_UART_PHYS
default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
default 0xfff36000 if DEBUG_HIGHBANK_UART
- default 0xfffe8600 if DEBUG_UART_BCM63XX
+ default 0xfffe8600 if DEBUG_BCM63XX_UART
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
@@ -1320,7 +1315,7 @@ config DEBUG_UART_PHYS
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
@@ -1358,7 +1353,7 @@ config DEBUG_UART_VIRT
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
- default 0xfcfe8600 if DEBUG_UART_BCM63XX
+ default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
default 0xfd012000 if ARCH_MV78XX0
@@ -1398,7 +1393,7 @@ config DEBUG_UART_VIRT
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html