[PATCH 4.1 01/43] tpm, tpm_tis: fix tpm_tis ACPI detection issue with TPM 2.0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>

commit 399235dc6e95400a1322a9999e92073bc572f0c8 upstream.

Both for FIFO and CRB interface TCG has decided to use the same HID
MSFT0101. They can be differentiated by looking at the start method from
TPM2 ACPI table. This patches makes necessary fixes to tpm_tis and
tpm_crb modules in order to correctly detect, which module should be
used.

For MSFT0101 we must use struct acpi_driver because struct pnp_driver
has a 7 character limitation.

It turned out that the root cause in b371616b8 was not correct for
https://bugzilla.kernel.org/show_bug.cgi?id=98181.

v2:

* One fixup was missing from v1: is_tpm2_fifo -> is_fifo

v3:

* Use pnp_driver for existing HIDs and acpi_driver only for MSFT0101 in
  order ensure backwards compatibility.

v4:

* Check for FIFO before doing *anything* in crb_acpi_add().
* There was return immediately after acpi_bus_unregister_driver() in
  cleanup_tis(). This caused pnp_unregister_driver() not to be called.

Reported-by: Michael Saunders <mick.saunders@xxxxxxxxx>
Reported-by: Michael Marley <michael@xxxxxxxxxxxxxxxxx>
Reported-by: Jethro Beekman <kernel@xxxxxxxxxxx>
Reported-by: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
Tested-by: Michael Marley <michael@xxxxxxxxxxxxxxxxx>
Tested-by: Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx> (on TPM 1.2)
Reviewed-by: Peter Huewe <peterhuewe@xxxxxx>
Signed-off-by: Peter Huewe <peterhuewe@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/char/tpm/tpm.h     |    7 +
 drivers/char/tpm/tpm_crb.c |   32 ++-----
 drivers/char/tpm/tpm_tis.c |  192 ++++++++++++++++++++++++++++++++++++++-------
 3 files changed, 181 insertions(+), 50 deletions(-)

--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -115,6 +115,13 @@ enum tpm2_startup_types {
 	TPM2_SU_STATE	= 0x0001,
 };
 
+enum tpm2_start_method {
+	TPM2_START_ACPI = 2,
+	TPM2_START_FIFO = 6,
+	TPM2_START_CRB = 7,
+	TPM2_START_CRB_WITH_ACPI = 8,
+};
+
 struct tpm_chip;
 
 struct tpm_vendor_specific {
--- a/drivers/char/tpm/tpm_crb.c
+++ b/drivers/char/tpm/tpm_crb.c
@@ -34,12 +34,6 @@ enum crb_defaults {
 	CRB_ACPI_START_INDEX = 1,
 };
 
-enum crb_start_method {
-	CRB_SM_ACPI_START = 2,
-	CRB_SM_CRB = 7,
-	CRB_SM_CRB_WITH_ACPI_START = 8,
-};
-
 struct acpi_tpm2 {
 	struct acpi_table_header hdr;
 	u16 platform_class;
@@ -220,12 +214,6 @@ static int crb_acpi_add(struct acpi_devi
 	u64 pa;
 	int rc;
 
-	chip = tpmm_chip_alloc(dev, &tpm_crb);
-	if (IS_ERR(chip))
-		return PTR_ERR(chip);
-
-	chip->flags = TPM_CHIP_FLAG_TPM2;
-
 	status = acpi_get_table(ACPI_SIG_TPM2, 1,
 				(struct acpi_table_header **) &buf);
 	if (ACPI_FAILURE(status)) {
@@ -233,13 +221,15 @@ static int crb_acpi_add(struct acpi_devi
 		return -ENODEV;
 	}
 
-	/* At least some versions of AMI BIOS have a bug that TPM2 table has
-	 * zero address for the control area and therefore we must fail.
-	*/
-	if (!buf->control_area_pa) {
-		dev_err(dev, "TPM2 ACPI table has a zero address for the control area\n");
-		return -EINVAL;
-	}
+	/* Should the FIFO driver handle this? */
+	if (buf->start_method == TPM2_START_FIFO)
+		return -ENODEV;
+
+	chip = tpmm_chip_alloc(dev, &tpm_crb);
+	if (IS_ERR(chip))
+		return PTR_ERR(chip);
+
+	chip->flags = TPM_CHIP_FLAG_TPM2;
 
 	if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
 		dev_err(dev, "TPM2 ACPI table has wrong size");
@@ -259,11 +249,11 @@ static int crb_acpi_add(struct acpi_devi
 	 * report only ACPI start but in practice seems to require both
 	 * ACPI start and CRB start.
 	 */
-	if (sm == CRB_SM_CRB || sm == CRB_SM_CRB_WITH_ACPI_START ||
+	if (sm == TPM2_START_CRB || sm == TPM2_START_FIFO ||
 	    !strcmp(acpi_device_hid(device), "MSFT0101"))
 		priv->flags |= CRB_FL_CRB_START;
 
-	if (sm == CRB_SM_ACPI_START || sm == CRB_SM_CRB_WITH_ACPI_START)
+	if (sm == TPM2_START_ACPI || sm == TPM2_START_CRB_WITH_ACPI)
 		priv->flags |= CRB_FL_ACPI_START;
 
 	priv->cca = (struct crb_control_area __iomem *)
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2005, 2006 IBM Corporation
- * Copyright (C) 2014 Intel Corporation
+ * Copyright (C) 2014, 2015 Intel Corporation
  *
  * Authors:
  * Leendert van Doorn <leendert@xxxxxxxxxxxxxx>
@@ -28,6 +28,7 @@
 #include <linux/wait.h>
 #include <linux/acpi.h>
 #include <linux/freezer.h>
+#include <acpi/actbl2.h>
 #include "tpm.h"
 
 enum tis_access {
@@ -65,6 +66,17 @@ enum tis_defaults {
 	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
 };
 
+struct tpm_info {
+	unsigned long start;
+	unsigned long len;
+	unsigned int irq;
+};
+
+static struct tpm_info tis_default_info = {
+	.start = TIS_MEM_BASE,
+	.len = TIS_MEM_LEN,
+	.irq = 0,
+};
 
 /* Some timeout values are needed before it is known whether the chip is
  * TPM 1.0 or TPM 2.0.
@@ -91,26 +103,54 @@ struct priv_data {
 };
 
 #if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
-static int is_itpm(struct pnp_dev *dev)
+static int has_hid(struct acpi_device *dev, const char *hid)
 {
-	struct acpi_device *acpi = pnp_acpi_device(dev);
 	struct acpi_hardware_id *id;
 
-	if (!acpi)
-		return 0;
-
-	list_for_each_entry(id, &acpi->pnp.ids, list) {
-		if (!strcmp("INTC0102", id->id))
+	list_for_each_entry(id, &dev->pnp.ids, list)
+		if (!strcmp(hid, id->id))
 			return 1;
-	}
 
 	return 0;
 }
+
+static inline int is_itpm(struct acpi_device *dev)
+{
+	return has_hid(dev, "INTC0102");
+}
+
+static inline int is_fifo(struct acpi_device *dev)
+{
+	struct acpi_table_tpm2 *tbl;
+	acpi_status st;
+
+	/* TPM 1.2 FIFO */
+	if (!has_hid(dev, "MSFT0101"))
+		return 1;
+
+	st = acpi_get_table(ACPI_SIG_TPM2, 1,
+			    (struct acpi_table_header **) &tbl);
+	if (ACPI_FAILURE(st)) {
+		dev_err(&dev->dev, "failed to get TPM2 ACPI table\n");
+		return 0;
+	}
+
+	if (le32_to_cpu(tbl->start_method) != TPM2_START_FIFO)
+		return 0;
+
+	/* TPM 2.0 FIFO */
+	return 1;
+}
 #else
-static inline int is_itpm(struct pnp_dev *dev)
+static inline int is_itpm(struct acpi_device *dev)
 {
 	return 0;
 }
+
+static inline int is_fifo(struct acpi_device *dev)
+{
+	return 1;
+}
 #endif
 
 /* Before we attempt to access the TPM we must see that the valid bit is set.
@@ -600,9 +640,8 @@ static void tpm_tis_remove(struct tpm_ch
 	release_locality(chip, chip->vendor.locality, 1);
 }
 
-static int tpm_tis_init(struct device *dev, acpi_handle acpi_dev_handle,
-			resource_size_t start, resource_size_t len,
-			unsigned int irq)
+static int tpm_tis_init(struct device *dev, struct tpm_info *tpm_info,
+			acpi_handle acpi_dev_handle)
 {
 	u32 vendor, intfcaps, intmask;
 	int rc, i, irq_s, irq_e, probe;
@@ -622,7 +661,7 @@ static int tpm_tis_init(struct device *d
 	chip->acpi_dev_handle = acpi_dev_handle;
 #endif
 
-	chip->vendor.iobase = devm_ioremap(dev, start, len);
+	chip->vendor.iobase = devm_ioremap(dev, tpm_info->start, tpm_info->len);
 	if (!chip->vendor.iobase)
 		return -EIO;
 
@@ -707,7 +746,7 @@ static int tpm_tis_init(struct device *d
 		  chip->vendor.iobase +
 		  TPM_INT_ENABLE(chip->vendor.locality));
 	if (interrupts)
-		chip->vendor.irq = irq;
+		chip->vendor.irq = tpm_info->irq;
 	if (interrupts && !chip->vendor.irq) {
 		irq_s =
 		    ioread8(chip->vendor.iobase +
@@ -890,27 +929,27 @@ static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm
 static int tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 				      const struct pnp_device_id *pnp_id)
 {
-	resource_size_t start, len;
-	unsigned int irq = 0;
+	struct tpm_info tpm_info = tis_default_info;
 	acpi_handle acpi_dev_handle = NULL;
 
-	start = pnp_mem_start(pnp_dev, 0);
-	len = pnp_mem_len(pnp_dev, 0);
+	tpm_info.start = pnp_mem_start(pnp_dev, 0);
+	tpm_info.len = pnp_mem_len(pnp_dev, 0);
 
 	if (pnp_irq_valid(pnp_dev, 0))
-		irq = pnp_irq(pnp_dev, 0);
+		tpm_info.irq = pnp_irq(pnp_dev, 0);
 	else
 		interrupts = false;
 
-	if (is_itpm(pnp_dev))
-		itpm = true;
-
 #ifdef CONFIG_ACPI
-	if (pnp_acpi_device(pnp_dev))
+	if (pnp_acpi_device(pnp_dev)) {
+		if (is_itpm(pnp_acpi_device(pnp_dev)))
+			itpm = true;
+
 		acpi_dev_handle = pnp_acpi_device(pnp_dev)->handle;
+	}
 #endif
 
-	return tpm_tis_init(&pnp_dev->dev, acpi_dev_handle, start, len, irq);
+	return tpm_tis_init(&pnp_dev->dev, &tpm_info, acpi_dev_handle);
 }
 
 static struct pnp_device_id tpm_pnp_tbl[] = {
@@ -930,6 +969,7 @@ MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
 static void tpm_tis_pnp_remove(struct pnp_dev *dev)
 {
 	struct tpm_chip *chip = pnp_get_drvdata(dev);
+
 	tpm_chip_unregister(chip);
 	tpm_tis_remove(chip);
 }
@@ -950,6 +990,79 @@ module_param_string(hid, tpm_pnp_tbl[TIS
 MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
 #endif
 
+#ifdef CONFIG_ACPI
+static int tpm_check_resource(struct acpi_resource *ares, void *data)
+{
+	struct tpm_info *tpm_info = (struct tpm_info *) data;
+	struct resource res;
+
+	if (acpi_dev_resource_interrupt(ares, 0, &res)) {
+		tpm_info->irq = res.start;
+	} else if (acpi_dev_resource_memory(ares, &res)) {
+		tpm_info->start = res.start;
+		tpm_info->len = resource_size(&res);
+	}
+
+	return 1;
+}
+
+static int tpm_tis_acpi_init(struct acpi_device *acpi_dev)
+{
+	struct list_head resources;
+	struct tpm_info tpm_info = tis_default_info;
+	int ret;
+
+	if (!is_fifo(acpi_dev))
+		return -ENODEV;
+
+	INIT_LIST_HEAD(&resources);
+	ret = acpi_dev_get_resources(acpi_dev, &resources, tpm_check_resource,
+				     &tpm_info);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&resources);
+
+	if (!tpm_info.irq)
+		interrupts = false;
+
+	if (is_itpm(acpi_dev))
+		itpm = true;
+
+	return tpm_tis_init(&acpi_dev->dev, &tpm_info, acpi_dev->handle);
+}
+
+static int tpm_tis_acpi_remove(struct acpi_device *dev)
+{
+	struct tpm_chip *chip = dev_get_drvdata(&dev->dev);
+
+	tpm_chip_unregister(chip);
+	tpm_tis_remove(chip);
+
+	return 0;
+}
+
+static struct acpi_device_id tpm_acpi_tbl[] = {
+	{"MSFT0101", 0},	/* TPM 2.0 */
+	/* Add new here */
+	{"", 0},		/* User Specified */
+	{"", 0}			/* Terminator */
+};
+MODULE_DEVICE_TABLE(acpi, tpm_acpi_tbl);
+
+static struct acpi_driver tis_acpi_driver = {
+	.name = "tpm_tis",
+	.ids = tpm_acpi_tbl,
+	.ops = {
+		.add = tpm_tis_acpi_init,
+		.remove = tpm_tis_acpi_remove,
+	},
+	.drv = {
+		.pm = &tpm_tis_pm,
+	},
+};
+#endif
+
 static struct platform_driver tis_drv = {
 	.driver = {
 		.name		= "tpm_tis",
@@ -966,9 +1079,25 @@ static int __init init_tis(void)
 {
 	int rc;
 #ifdef CONFIG_PNP
-	if (!force)
-		return pnp_register_driver(&tis_pnp_driver);
+	if (!force) {
+		rc = pnp_register_driver(&tis_pnp_driver);
+		if (rc)
+			return rc;
+	}
+#endif
+#ifdef CONFIG_ACPI
+	if (!force) {
+		rc = acpi_bus_register_driver(&tis_acpi_driver);
+		if (rc) {
+#ifdef CONFIG_PNP
+			pnp_unregister_driver(&tis_pnp_driver);
 #endif
+			return rc;
+		}
+	}
+#endif
+	if (!force)
+		return 0;
 
 	rc = platform_driver_register(&tis_drv);
 	if (rc < 0)
@@ -978,7 +1107,7 @@ static int __init init_tis(void)
 		rc = PTR_ERR(pdev);
 		goto err_dev;
 	}
-	rc = tpm_tis_init(&pdev->dev, NULL, TIS_MEM_BASE, TIS_MEM_LEN, 0);
+	rc = tpm_tis_init(&pdev->dev, &tis_default_info, NULL);
 	if (rc)
 		goto err_init;
 	return 0;
@@ -992,9 +1121,14 @@ err_dev:
 static void __exit cleanup_tis(void)
 {
 	struct tpm_chip *chip;
-#ifdef CONFIG_PNP
+#if defined(CONFIG_PNP) || defined(CONFIG_ACPI)
 	if (!force) {
+#ifdef CONFIG_ACPI
+		acpi_bus_unregister_driver(&tis_acpi_driver);
+#endif
+#ifdef CONFIG_PNP
 		pnp_unregister_driver(&tis_pnp_driver);
+#endif
 		return;
 	}
 #endif


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]