4.2.8-ckt1 -stable review patch. If anyone has any objections, please let me know.
------------------
From: Hartmut Knaack <knaack.h@xxxxxx>
commit 2427d22de807b40f72175c8c9b1ff8a07275ad82 upstream.
Sort the entry for bmc105_magn in Kconfig and Makefile to its correct
position. Also add the minor module information for completeness.
Fixes: c91746a2361d ("iio: magn: Add support for BMC150 magnetometer")
Signed-off-by: Hartmut Knaack <knaack.h@xxxxxx>
Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxxx>
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
drivers/iio/magnetometer/Kconfig | 33 ++++++++++++++++++---------------
drivers/iio/magnetometer/Makefile | 3 +--
2 files changed, 19 insertions(+), 17 deletions(-)
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index efb9350..868abad 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -24,6 +24,24 @@ config AK09911
help
Deprecated: AK09911 is now supported by AK8975 driver.
+config BMC150_MAGN
+ tristate "Bosch BMC150 Magnetometer Driver"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for the BMC150 magnetometer.
+
+ Currently this only supports the device via an i2c interface.
+
+ This is a combo module with both accelerometer and magnetometer.
+ This driver is only implementing magnetometer part, which has
+ its own address and register map.
+
+ To compile this driver as a module, choose M here: the module will be
+ called bmc150_magn.
+
config MAG3110
tristate "Freescale MAG3110 3-Axis Magnetometer"
depends on I2C
@@ -87,19 +105,4 @@ config IIO_ST_MAGN_SPI_3AXIS
depends on IIO_ST_MAGN_3AXIS
depends on IIO_ST_SENSORS_SPI
-config BMC150_MAGN
- tristate "Bosch BMC150 Magnetometer Driver"
- depends on I2C
- select REGMAP_I2C
- select IIO_BUFFER
- select IIO_TRIGGERED_BUFFER
- help
- Say yes here to build support for the BMC150 magnetometer.
-
- Currently this only supports the device via an i2c interface.
-
- This is a combo module with both accelerometer and magnetometer.
- This driver is only implementing magnetometer part, which has
- its own address and register map.
-
endmenu
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
index 33b1d4d..2c72df4 100644
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -4,6 +4,7 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AK8975) += ak8975.o
+obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
obj-$(CONFIG_MAG3110) += mag3110.o
obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
obj-$(CONFIG_MMC35240) += mmc35240.o
@@ -14,5 +15,3 @@ st_magn-$(CONFIG_IIO_BUFFER) += st_magn_buffer.o
obj-$(CONFIG_IIO_ST_MAGN_I2C_3AXIS) += st_magn_i2c.o
obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o
-
-obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html