4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Carol L Soto <clsoto@xxxxxxxxxxxxxxxxxx>
[ Upstream commit c02b05011fadf8e409e41910217ca689f2fc9d91 ]
When doing memcpy/memset of EQEs, we should use sizeof struct
mlx4_eqe as the base size and not caps.eqe_size which could be bigger.
If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt
data in the master context.
When using a 64 byte stride, the memcpy copied over 63 bytes to the
slave_eq structure. This resulted in copying over the entire eqe of
interest, including its ownership bit -- and also 31 bytes of garbage
into the next WQE in the slave EQ -- which did NOT include the ownership
bit (and therefore had no impact).
However, once the stride is increased to 128, we are overwriting the
ownership bits of *three* eqes in the slave_eq struct. This results
in an incorrect ownership bit for those eqes, which causes the eq to
seem to be full. The issue therefore surfaced only once 128-byte EQEs
started being used in SRIOV and (overarchitectures that have 128/256
byte cache-lines such as PPC) - e.g after commit 77507aa249ae
"net/mlx4_core: Enable CQE/EQE stride support".
Fixes: 08ff32352d6f ('mlx4: 64-byte CQE/EQE support')
Signed-off-by: Carol L Soto <clsoto@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Jack Morgenstein <jackm@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Or Gerlitz <ogerlitz@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/ethernet/mellanox/mlx4/cmd.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/eq.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -2382,7 +2382,7 @@ int mlx4_multi_func_init(struct mlx4_dev
}
}
- memset(&priv->mfunc.master.cmd_eqe, 0, dev->caps.eqe_size);
+ memset(&priv->mfunc.master.cmd_eqe, 0, sizeof(struct mlx4_eqe));
priv->mfunc.master.cmd_eqe.type = MLX4_EVENT_TYPE_CMD;
INIT_WORK(&priv->mfunc.master.comm_work,
mlx4_master_comm_channel);
--- a/drivers/net/ethernet/mellanox/mlx4/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/eq.c
@@ -185,7 +185,7 @@ static void slave_event(struct mlx4_dev
return;
}
- memcpy(s_eqe, eqe, dev->caps.eqe_size - 1);
+ memcpy(s_eqe, eqe, sizeof(struct mlx4_eqe) - 1);
s_eqe->slave_id = slave;
/* ensure all information is written before setting the ownersip bit */
dma_wmb();
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html