This is a note to let you know that I've just added the patch titled
usb: gadget: atmel_usba_udc: Expose correct device speed
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From d134c48d889ddceadf4c990e6f3df16b816ed5d4 Mon Sep 17 00:00:00 2001
From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Date: Mon, 16 Nov 2015 19:22:08 +0100
Subject: usb: gadget: atmel_usba_udc: Expose correct device speed
Following changes that appeared in lk 4.0.0, the gadget udc driver for
some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families)
incorrectly deduced full-speed USB link speed even when the hardware
had negotiated a high-speed link. The fix is to make sure that the
UDPHS Interrupt Enable Register value does not mask the SPEED bit
in the Interrupt Status Register.
For a mass storage gadget this problem lead to failures when the host
had a USB 3 port with the xhci_hcd driver. If the host was a USB 2
port using the ehci_hcd driver then the mass storage gadget worked
(but probably at a lower speed than it should have).
Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> #4.0+
Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs")
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index f0f2b066ac08..f92f5aff0dd5 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1633,7 +1633,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
spin_lock(&udc->lock);
int_enb = usba_int_enb_get(udc);
- status = usba_readl(udc, INT_STA) & int_enb;
+ status = usba_readl(udc, INT_STA) & (int_enb | USBA_HIGH_SPEED);
DBG(DBG_INT, "irq, status=%#08x\n", status);
if (status & USBA_DET_SUSPEND) {
--
2.6.2
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html