[PATCH 3.14 34/37] md/raid5: fix locking in handle_stripe_clean_event()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roman Gushchin <klamm@xxxxxxxxxxxxxx>

commit b8a9d66d043ffac116100775a469f05f5158c16f upstream.

After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()")
__find_stripe() is called under conf->hash_locks + hash.
But handle_stripe_clean_event() calls remove_hash() under
conf->device_lock.

Under some cirscumstances the hash chain can be circuited,
and we get an infinite loop with disabled interrupts and locked hash
lock in __find_stripe(). This leads to hard lockup on multiple CPUs
and following system crash.

I was able to reproduce this behavior on raid6 over 6 ssd disks.
The devices_handle_discard_safely option should be set to enable trim
support. The following script was used:

for i in `seq 1 32`; do
    dd if=/dev/zero of=large$i bs=10M count=100 &
done

neilb: original was against a 3.x kernel.  I forward-ported
  to 4.3-rc.  This verison is suitable for any kernel since
  Commit: 59fc630b8b5f ("RAID5: batch adjacent full stripe write")
  (v4.1+).  I'll post a version for earlier kernels to stable.

Signed-off-by: Roman Gushchin <klamm@xxxxxxxxxxxxxx>
Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()")
Signed-off-by: NeilBrown <neilb@xxxxxxxx>
Cc: Shaohua Li <shli@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 3.13 - 4.2
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/md/raid5.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3029,6 +3029,8 @@ static void handle_stripe_clean_event(st
 		}
 	if (!discard_pending &&
 	    test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
+		int hash = sh->hash_lock_index;
+
 		clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
 		clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
 		if (sh->qd_idx >= 0) {
@@ -3042,9 +3044,9 @@ static void handle_stripe_clean_event(st
 		 * no updated data, so remove it from hash list and the stripe
 		 * will be reinitialized
 		 */
-		spin_lock_irq(&conf->device_lock);
+		spin_lock_irq(conf->hash_locks + hash);
 		remove_hash(sh);
-		spin_unlock_irq(&conf->device_lock);
+		spin_unlock_irq(conf->hash_locks + hash);
 		if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
 			set_bit(STRIPE_HANDLE, &sh->state);
 


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]