We need to keep initial st_nci_gates values in order for
nfc_hci_dev_connect_gates to create and open pipe when necessary.
For example after a firmware update CLF pipes are cleared. Changing pipe
values in st21nfca_gates was causing nfc_hci_dev_connect_gates not using
accurate pipes value.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Christophe Ricard <christophe-h.ricard@xxxxxx>
---
drivers/nfc/st21nfca/st21nfca.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/nfc/st21nfca/st21nfca.c b/drivers/nfc/st21nfca/st21nfca.c
index 5ff9b33..fb0c0ac 100644
--- a/drivers/nfc/st21nfca/st21nfca.c
+++ b/drivers/nfc/st21nfca/st21nfca.c
@@ -192,14 +192,14 @@ static int st21nfca_hci_load_session(struct nfc_hci_dev *hdev)
if (j < ARRAY_SIZE(st21nfca_gates) &&
st21nfca_gates[j].gate == info->dst_gate_id &&
ST21NFCA_DM_IS_PIPE_OPEN(info->pipe_state)) {
- st21nfca_gates[j].pipe = pipe_info[2];
+ hdev->init_data.gates[j].pipe = pipe_info[2];
hdev->gate2pipe[st21nfca_gates[j].gate] =
- st21nfca_gates[j].pipe;
- hdev->pipes[st21nfca_gates[j].pipe].gate =
- st21nfca_gates[j].gate;
- hdev->pipes[st21nfca_gates[j].pipe].dest_host =
- info->src_host_id;
+ pipe_info[2];
+ hdev->pipes[pipe_info[2]].gate =
+ st21nfca_gates[j].gate;
+ hdev->pipes[pipe_info[2]].dest_host =
+ info->src_host_id;
}
kfree_skb(skb_pipe_info);
}
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html