[PATCH 4.1 152/202] usb: chipidea: udc: using the correct stall implementation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@xxxxxxxxxxxxx>

commit 56ffa1d154c7e12af16273f0cdc42690dd05caf5 upstream.

According to spec, there are functional and protocol stalls.

For functional stall, it is for bulk and interrupt endpoints,
below are cases for it:
- Host sends SET_FEATURE request for Set-Halt, the udc driver
needs to set stall, and return true unconditionally.
- The gadget driver may call usb_ep_set_halt to stall certain
endpoints, if there is a transfer in pending, the udc driver
should not set stall, and return -EAGAIN accordingly.
These two kinds of stall need to be cleared by host using CLEAR_FEATURE
request (Clear-Halt).

For protocol stall, it is for control endpoint, this stall will
be set if the control request has failed. This stall will be
cleared by next setup request (hardware will do it).

It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt"
test failure, meanwhile, this change has been verified by
USB2 CV Compliance Test and MSC Tests.

Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/chipidea/udc.c |   84 +++++++++++++++++++++++----------------------
 1 file changed, 44 insertions(+), 40 deletions(-)

--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@ __acquires(hwep->lock)
 	return 0;
 }
 
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+	int direction, retval = 0;
+	unsigned long flags;
+
+	if (ep == NULL || hwep->ep.desc == NULL)
+		return -EINVAL;
+
+	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(hwep->lock, flags);
+
+	if (value && hwep->dir == TX && check_transfer &&
+		!list_empty(&hwep->qh.queue) &&
+			!usb_endpoint_xfer_control(hwep->ep.desc)) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return -EAGAIN;
+	}
+
+	direction = hwep->dir;
+	do {
+		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+		if (!value)
+			hwep->wedge = 0;
+
+		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+			hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+	} while (hwep->dir != direction);
+
+	spin_unlock_irqrestore(hwep->lock, flags);
+	return retval;
+}
+
+
 /**
  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
  * @gadget: gadget
@@ -1051,7 +1089,7 @@ __acquires(ci->lock)
 				num += ci->hw_ep_max / 2;
 
 			spin_unlock(&ci->lock);
-			err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+			err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
 			spin_lock(&ci->lock);
 			if (!err)
 				isr_setup_status_phase(ci);
@@ -1110,8 +1148,8 @@ delegate:
 
 	if (err < 0) {
 		spin_unlock(&ci->lock);
-		if (usb_ep_set_halt(&hwep->ep))
-			dev_err(ci->dev, "error: ep_set_halt\n");
+		if (_ep_set_halt(&hwep->ep, 1, false))
+			dev_err(ci->dev, "error: _ep_set_halt\n");
 		spin_lock(&ci->lock);
 	}
 }
@@ -1142,9 +1180,9 @@ __acquires(ci->lock)
 					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					spin_unlock(&ci->lock);
-					if (usb_ep_set_halt(&hwep->ep))
+					if (_ep_set_halt(&hwep->ep, 1, false))
 						dev_err(ci->dev,
-							"error: ep_set_halt\n");
+						"error: _ep_set_halt\n");
 					spin_lock(&ci->lock);
 				}
 			}
@@ -1390,41 +1428,7 @@ static int ep_dequeue(struct usb_ep *ep,
  */
 static int ep_set_halt(struct usb_ep *ep, int value)
 {
-	struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
-	int direction, retval = 0;
-	unsigned long flags;
-
-	if (ep == NULL || hwep->ep.desc == NULL)
-		return -EINVAL;
-
-	if (usb_endpoint_xfer_isoc(hwep->ep.desc))
-		return -EOPNOTSUPP;
-
-	spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
-	/* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
-	if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
-	    !list_empty(&hwep->qh.queue)) {
-		spin_unlock_irqrestore(hwep->lock, flags);
-		return -EAGAIN;
-	}
-#endif
-
-	direction = hwep->dir;
-	do {
-		retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
-		if (!value)
-			hwep->wedge = 0;
-
-		if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
-			hwep->dir = (hwep->dir == TX) ? RX : TX;
-
-	} while (hwep->dir != direction);
-
-	spin_unlock_irqrestore(hwep->lock, flags);
-	return retval;
+	return _ep_set_halt(ep, value, true);
 }
 
 /**


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]