Patch "usb: Use the USB_SS_MULT() macro to get the burst multiplier." has been added to the 3.14-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    usb: Use the USB_SS_MULT() macro to get the burst multiplier.

to the 3.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-use-the-usb_ss_mult-macro-to-get-the-burst-multiplier.patch
and it can be found in the queue-3.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From ff30cbc8da425754e8ab96904db1d295bd034f27 Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Date: Mon, 21 Sep 2015 17:46:09 +0300
Subject: usb: Use the USB_SS_MULT() macro to get the burst multiplier.

From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>

commit ff30cbc8da425754e8ab96904db1d295bd034f27 upstream.

Bits 1:0 of the bmAttributes are used for the burst multiplier.
The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7
into use.

Use the existing USB_SS_MULT() macro instead to make sure the mult value
and hence max packet calculations are correct for USB3.1 devices.

Note that burst multiplier in bmAttributes is zero based and that
the USB_SS_MULT() macro adds one.

Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/core/config.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -113,7 +113,7 @@ static void usb_parse_ss_endpoint_compan
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
 		ep->ss_ep_comp.bmAttributes = 16;
 	} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
-			desc->bmAttributes > 2) {
+		   USB_SS_MULT(desc->bmAttributes) > 3) {
 		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
 				"config %d interface %d altsetting %d ep %d: "
 				"setting to 3\n", desc->bmAttributes + 1,
@@ -122,7 +122,8 @@ static void usb_parse_ss_endpoint_compan
 	}
 
 	if (usb_endpoint_xfer_isoc(&ep->desc))
-		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
+		max_tx = (desc->bMaxBurst + 1) *
+			(USB_SS_MULT(desc->bmAttributes)) *
 			usb_endpoint_maxp(&ep->desc);
 	else if (usb_endpoint_xfer_int(&ep->desc))
 		max_tx = usb_endpoint_maxp(&ep->desc) *


Patches currently in stable-queue which might be from mathias.nyman@xxxxxxxxxxxxxxx are

queue-3.14/usb-xhci-clear-xhci_state_dying-on-start.patch
queue-3.14/usb-xhci-add-support-for-urb_zero_packet-to-bulk-sg-transfers.patch
queue-3.14/usb-use-the-usb_ss_mult-macro-to-get-the-burst-multiplier.patch
queue-3.14/xhci-change-xhci-1.0-only-restrictions-to-support-xhci-1.1.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]