Hi Sylwester,
On 10/12/2015 02:48 PM, Sylwester Nawrocki wrote:
On 12/10/15 08:47, Krzysztof Kozlowski wrote:
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8f4d76c..525a93a 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -1056,5 +1056,10 @@
timeout-sec = <32>;
};
+&pmu_system_controller {
Please put the node in alphabetical order.
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_FIN_PLL>;
I might be missing something here but isn't the first clock of
pmu_system_controller already a CLK_FIN_PLL? So you are reparenting the
FIN_PLL to FIN_PLL?
No, it's not, the first PMU consumer clock is indeed CLK_FIN_PLL,
but pmu_system_controller is also a clock provider. The first output
clock of pmu_system_controller is CLKOUT, it's a composite mux and
gate clock (registered in drivers/clk/samsung /clk-exynos-clkout.c).
So the above dts change is selecting an external oscillator input of
the CLKOUT mux, i.e. it will route 24 MHz clock signal from the external
oscillator to the CLKOUT output pin, to which audio CODEC is connected
on peach-pit AFAICS.
Thanks for your explanation, indeed master clock of codec is
connected to XCLKOUT on peach boards.
Will send v2 addressing Kezysztof's other comments.
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html