[STABLE] Please backport asix (USB Ethernet) fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi David + stable@,

Please could these two be backported:
3cc81d85ee01 "asix: Don't reset PHY on if_up for ASIX 88772"
436c2a5036b6 "asix: Do full reset during ax88772_bind"

3cc81d85ee01 was in v3.18-rc1 while 436c2a5036b6 was in v3.18-rc5 so both
should be backported to anything older which still has active longterm
support, please.

Our automated test is occasionally tripping over a failure to achieve link
on the arndale board with 3.16 (both the Debian Jessie kernel used at host
install time and the 3.16 kernel under test), reporting lots of this:
    Oct  4 02:01:17.077037 [  411.069293] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:21.037081 [  414.525294] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:24.493057 [  419.773293] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:29.741083 [  423.229292] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:33.197066 [  426.685292] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:36.653128 [  430.141291] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:40.109050 [  440.765293] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:50.733034 [  446.141292] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:01:56.109092 [  471.614170] asix 2-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
    Oct  4 02:02:21.581182 [  486.973293] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:02:36.941033 [  803.390169] asix 2-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
    Oct  4 02:07:53.353184 [  805.182045] asix 2-3.2.4:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
    Oct  4 02:07:55.145152 [  818.109291] asix 2-3.2.4:1.0 eth0: link down
    Oct  4 02:08:08.073064 [  825.149291] asix 2-3.2.4:1.0 eth0: link down

It appears that we no longer see this in 3.18 (although they still use
Debian's 3.16 at install time, which obscures things a little in the data
mining). These are the only commits to this driver between 3.16 and 3.18
and they sound like they might plausibly fix this.

Thanks,

Ian.

commit 3cc81d85ee01e5a0b7ea2f4190e2ed1165f53c31
Author: Michel Stam <m.stam@xxxxxxxx>
Date:   Thu Oct 2 10:22:02 2014 +0200

    asix: Don't reset PHY on if_up for ASIX 88772
    
    I've noticed every time the interface is set to 'up,', the kernel
    reports that the link speed is set to 100 Mbps/Full Duplex, even
    when ethtool is used to set autonegotiation to 'off', half
    duplex, 10 Mbps.
    It can be tested by:
     ifconfig eth0 down
     ethtool -s eth0 autoneg off speed 10 duplex half
     ifconfig eth0 up
    
    Then checking 'dmesg' for the link speed.
    
    Signed-off-by: Michel Stam <m.stam@xxxxxxxx>
    Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 5d19409..2c05f6c 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -890,7 +890,7 @@ static const struct driver_info ax88772_info = {
 	.unbind = ax88772_unbind,
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
-	.reset = ax88772_reset,
+	.reset = ax88772_link_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
 	.rx_fixup = asix_rx_fixup_common,
 	.tx_fixup = asix_tx_fixup,

commit 436c2a5036b6ffe813310df2cf327d3b69be0734
Author: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Date:   Thu Nov 6 15:49:41 2014 +0000

    asix: Do full reset during ax88772_bind
    
    commit 3cc81d85ee01 ("asix: Don't reset PHY on if_up for ASIX 88772")
    causes the ethernet on Arndale to no longer function. This appears to
    be because the Arndale ethernet requires a full reset before it will
    function correctly, however simply reverting the above patch causes
    problems with ethtool settings getting reset.
    
    It seems the problem is that the ethernet is not properly reset during
    bind, and indeed the code in ax88772_bind that resets the device is a
    very small subset of the actual ax88772_reset function. This patch uses
    ax88772_reset in place of the existing reset code in ax88772_bind which
    removes some code duplication and fixes the ethernet on Arndale.
    
    It is still possible that the original patch causes some issues with
    suspend and resume but that seems like a separate issue and I haven't
    had a chance to test that yet.
    
    Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
    Tested-by: Riku Voipio <riku.voipio@xxxxxxxxxx>
    Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 2c05f6c..816d511 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -465,19 +465,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
                return ret;
        }
 
-       ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
-       if (ret < 0)
-               return ret;
-
-       msleep(150);
-
-       ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
-       if (ret < 0)
-               return ret;
-
-       msleep(150);
-
-       ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+       ax88772_reset(dev);
 
        /* Read PHYID register *AFTER* the PHY was reset properly */
        phyid = asix_get_phyid(dev);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]