[PATCH 1/2] md/raid5: avoid races when changing cache size.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



commit 2d5b569b665ea6d0b15c52529ff06300de81a7ce upstream.

Cache size can grow or shrink due to various pressures at
any time.  So when we resize the cache as part of a 'grow'
operation (i.e. change the size to allow more devices) we need
to blocks that automatic growing/shrinking.

So introduce a mutex.  auto grow/shrink uses mutex_trylock()
and just doesn't bother if there is a blockage.
Resizing the whole cache holds the mutex to ensure that
the correct number of new stripes is allocated.

This bug can result in some stripes not being freed when an
array is stopped.  This leads to the kmem_cache not being
freed and a subsequent array can try to use the same kmem_cache
and get confused.

Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.")
Cc: stable@xxxxxxxxxxxxxxx (4.1 - please delay until 2 weeks after release of 4.2)
Signed-off-by: NeilBrown <neilb@xxxxxxxx>
---
 drivers/md/raid5.c |   31 +++++++++++++++++++++++++------
 drivers/md/raid5.h |    3 ++-
 2 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index b6793d2e051f..b369cbea4e54 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2151,6 +2151,9 @@ static int resize_stripes(struct r5conf *conf, int newsize)
 	if (!sc)
 		return -ENOMEM;
 
+	/* Need to ensure auto-resizing doesn't interfere */
+	mutex_lock(&conf->cache_size_mutex);
+
 	for (i = conf->max_nr_stripes; i; i--) {
 		nsh = alloc_stripe(sc, GFP_KERNEL);
 		if (!nsh)
@@ -2167,6 +2170,7 @@ static int resize_stripes(struct r5conf *conf, int newsize)
 			kmem_cache_free(sc, nsh);
 		}
 		kmem_cache_destroy(sc);
+		mutex_unlock(&conf->cache_size_mutex);
 		return -ENOMEM;
 	}
 	/* Step 2 - Must use GFP_NOIO now.
@@ -2213,6 +2217,7 @@ static int resize_stripes(struct r5conf *conf, int newsize)
 	} else
 		err = -ENOMEM;
 
+	mutex_unlock(&conf->cache_size_mutex);
 	/* Step 4, return new stripes to service */
 	while(!list_empty(&newstripes)) {
 		nsh = list_entry(newstripes.next, struct stripe_head, lru);
@@ -5846,12 +5851,14 @@ static void raid5d(struct md_thread *thread)
 	pr_debug("%d stripes handled\n", handled);
 
 	spin_unlock_irq(&conf->device_lock);
-	if (test_and_clear_bit(R5_ALLOC_MORE, &conf->cache_state)) {
+	if (test_and_clear_bit(R5_ALLOC_MORE, &conf->cache_state) &&
+	    mutex_trylock(&conf->cache_size_mutex)) {
 		grow_one_stripe(conf, __GFP_NOWARN);
 		/* Set flag even if allocation failed.  This helps
 		 * slow down allocation requests when mem is short
 		 */
 		set_bit(R5_DID_ALLOC, &conf->cache_state);
+		mutex_unlock(&conf->cache_size_mutex);
 	}
 
 	async_tx_issue_pending_all();
@@ -5883,18 +5890,22 @@ raid5_set_cache_size(struct mddev *mddev, int size)
 		return -EINVAL;
 
 	conf->min_nr_stripes = size;
+	mutex_lock(&conf->cache_size_mutex);
 	while (size < conf->max_nr_stripes &&
 	       drop_one_stripe(conf))
 		;
+	mutex_unlock(&conf->cache_size_mutex);
 
 
 	err = md_allow_write(mddev);
 	if (err)
 		return err;
 
+	mutex_lock(&conf->cache_size_mutex);
 	while (size > conf->max_nr_stripes)
 		if (!grow_one_stripe(conf, GFP_KERNEL))
 			break;
+	mutex_unlock(&conf->cache_size_mutex);
 
 	return 0;
 }
@@ -6360,11 +6371,18 @@ static unsigned long raid5_cache_scan(struct shrinker *shrink,
 				      struct shrink_control *sc)
 {
 	struct r5conf *conf = container_of(shrink, struct r5conf, shrinker);
-	int ret = 0;
-	while (ret < sc->nr_to_scan) {
-		if (drop_one_stripe(conf) == 0)
-			return SHRINK_STOP;
-		ret++;
+	unsigned long ret = SHRINK_STOP;
+
+	if (mutex_trylock(&conf->cache_size_mutex)) {
+		ret= 0;
+		while (ret < sc->nr_to_scan) {
+			if (drop_one_stripe(conf) == 0) {
+				ret = SHRINK_STOP;
+				break;
+			}
+			ret++;
+		}
+		mutex_unlock(&conf->cache_size_mutex);
 	}
 	return ret;
 }
@@ -6433,6 +6451,7 @@ static struct r5conf *setup_conf(struct mddev *mddev)
 		goto abort;
 	spin_lock_init(&conf->device_lock);
 	seqcount_init(&conf->gen_lock);
+	mutex_init(&conf->cache_size_mutex);
 	init_waitqueue_head(&conf->wait_for_stripe);
 	init_waitqueue_head(&conf->wait_for_overlap);
 	INIT_LIST_HEAD(&conf->handle_list);
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 896d603ad0da..03472fbbd882 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -482,7 +482,8 @@ struct r5conf {
 	 */
 	int			active_name;
 	char			cache_name[2][32];
-	struct kmem_cache		*slab_cache; /* for allocating stripes */
+	struct kmem_cache	*slab_cache; /* for allocating stripes */
+	struct mutex		cache_size_mutex; /* Protect changes to cache size */
 
 	int			seq_flush, seq_write;
 	int			quiesce;


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]