This is a note to let you know that I've just added the patch titled
usb: chipidea: udc: using the correct stall implementation
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
>From 56ffa1d154c7e12af16273f0cdc42690dd05caf5 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Date: Mon, 24 Aug 2015 14:10:07 +0800
Subject: usb: chipidea: udc: using the correct stall implementation
According to spec, there are functional and protocol stalls.
For functional stall, it is for bulk and interrupt endpoints,
below are cases for it:
- Host sends SET_FEATURE request for Set-Halt, the udc driver
needs to set stall, and return true unconditionally.
- The gadget driver may call usb_ep_set_halt to stall certain
endpoints, if there is a transfer in pending, the udc driver
should not set stall, and return -EAGAIN accordingly.
These two kinds of stall need to be cleared by host using CLEAR_FEATURE
request (Clear-Halt).
For protocol stall, it is for control endpoint, this stall will
be set if the control request has failed. This stall will be
cleared by next setup request (hardware will do it).
It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt"
test failure, meanwhile, this change has been verified by
USB2 CV Compliance Test and MSC Tests.
Cc: <stable@xxxxxxxxxxxxxxx> #3.10+
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
drivers/usb/chipidea/udc.c | 84 ++++++++++++++++++++++++----------------------
1 file changed, 44 insertions(+), 40 deletions(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index a637da25dda0..8223fe73ea85 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -656,6 +656,44 @@ __acquires(hwep->lock)
return 0;
}
+static int _ep_set_halt(struct usb_ep *ep, int value, bool check_transfer)
+{
+ struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
+ int direction, retval = 0;
+ unsigned long flags;
+
+ if (ep == NULL || hwep->ep.desc == NULL)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_isoc(hwep->ep.desc))
+ return -EOPNOTSUPP;
+
+ spin_lock_irqsave(hwep->lock, flags);
+
+ if (value && hwep->dir == TX && check_transfer &&
+ !list_empty(&hwep->qh.queue) &&
+ !usb_endpoint_xfer_control(hwep->ep.desc)) {
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return -EAGAIN;
+ }
+
+ direction = hwep->dir;
+ do {
+ retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
+
+ if (!value)
+ hwep->wedge = 0;
+
+ if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
+ hwep->dir = (hwep->dir == TX) ? RX : TX;
+
+ } while (hwep->dir != direction);
+
+ spin_unlock_irqrestore(hwep->lock, flags);
+ return retval;
+}
+
+
/**
* _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
* @gadget: gadget
@@ -1051,7 +1089,7 @@ __acquires(ci->lock)
num += ci->hw_ep_max / 2;
spin_unlock(&ci->lock);
- err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
+ err = _ep_set_halt(&ci->ci_hw_ep[num].ep, 1, false);
spin_lock(&ci->lock);
if (!err)
isr_setup_status_phase(ci);
@@ -1117,8 +1155,8 @@ delegate:
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&hwep->ep))
- dev_err(ci->dev, "error: ep_set_halt\n");
+ if (_ep_set_halt(&hwep->ep, 1, false))
+ dev_err(ci->dev, "error: _ep_set_halt\n");
spin_lock(&ci->lock);
}
}
@@ -1149,9 +1187,9 @@ __acquires(ci->lock)
err = isr_setup_status_phase(ci);
if (err < 0) {
spin_unlock(&ci->lock);
- if (usb_ep_set_halt(&hwep->ep))
+ if (_ep_set_halt(&hwep->ep, 1, false))
dev_err(ci->dev,
- "error: ep_set_halt\n");
+ "error: _ep_set_halt\n");
spin_lock(&ci->lock);
}
}
@@ -1397,41 +1435,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
*/
static int ep_set_halt(struct usb_ep *ep, int value)
{
- struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
- int direction, retval = 0;
- unsigned long flags;
-
- if (ep == NULL || hwep->ep.desc == NULL)
- return -EINVAL;
-
- if (usb_endpoint_xfer_isoc(hwep->ep.desc))
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(hwep->lock, flags);
-
-#ifndef STALL_IN
- /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
- if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
- !list_empty(&hwep->qh.queue)) {
- spin_unlock_irqrestore(hwep->lock, flags);
- return -EAGAIN;
- }
-#endif
-
- direction = hwep->dir;
- do {
- retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
-
- if (!value)
- hwep->wedge = 0;
-
- if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
- hwep->dir = (hwep->dir == TX) ? RX : TX;
-
- } while (hwep->dir != direction);
-
- spin_unlock_irqrestore(hwep->lock, flags);
- return retval;
+ return _ep_set_halt(ep, value, true);
}
/**
--
2.5.2
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html