patch "usb: phy: phy-generic: Fix reset behaviour on legacy boot" added to usb-linus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    usb: phy: phy-generic: Fix reset behaviour on legacy boot

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


>From 762982db33b23029e98c844611e2e8beeb75bc0d Mon Sep 17 00:00:00 2001
From: Roger Quadros <rogerq@xxxxxx>
Date: Thu, 13 Aug 2015 13:28:42 +0300
Subject: usb: phy: phy-generic: Fix reset behaviour on legacy boot

The gpio-desc migration done in v4.0 caused a regression
with legacy boots due to reversed reset logic.
e.g. omap3-beagle USB host breaks on legacy boot.

Request the reset GPIO with GPIOF_ACTIVE_LOW flag so that
it matches the driver logic and pin behaviour.

Fixes: e9f2cefb0cdc ("usb: phy: generic: migrate to gpio_desc")
Cc: <stable@xxxxxxxxxxxxxxx> # 4.0+
Tested-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
 drivers/usb/phy/phy-generic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index ec6ecd03269c..5320cb8642cb 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -232,7 +232,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
 		if (gpio_is_valid(pdata->gpio_reset)) {
-			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+			err = devm_gpio_request_one(dev, pdata->gpio_reset,
+						    GPIOF_ACTIVE_LOW,
 						    dev_name(dev));
 			if (!err)
 				nop->gpiod_reset =
-- 
2.5.2


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]