[PATCH 4.1 08/78] rsi: Fix failure to load firmware after memory leak fix and fix the leak

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Looijmans <mike.looijmans@xxxxxxxx>

commit 5d5cd85ff441534a52f23f821d0a7c644d3b6cce upstream.

Fixes commit eae79b4f3e82 ("rsi: fix memory leak in rsi_load_ta_instructions()")
which stopped the driver from functioning.

Firmware data has been allocated using vmalloc(), resulting in memory
that cannot be used for DMA. Hence the firmware was first copied to a
buffer allocated with kmalloc() in the original code. This patch reverts
the commit and only calls "kfree()" to release the buffer after sending
the data. This fixes the memory leak without breaking the driver.

Add a comment to the kmemdup() calls to explain why this is done, and abort
if memory allocation fails.

Tested on a Topic Miami-Florida board which contains the rsi SDIO chip.

Also added the same kfree() call to the USB glue driver. This was not
tested on actual hardware though, as I only have the SDIO version.

Fixes: eae79b4f3e82 ("rsi: fix memory leak in rsi_load_ta_instructions()")
Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/wireless/rsi/rsi_91x_sdio_ops.c |    8 +++++++-
 drivers/net/wireless/rsi/rsi_91x_usb_ops.c  |    4 ++++
 2 files changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_sdio_ops.c
@@ -172,6 +172,7 @@ static int rsi_load_ta_instructions(stru
 		(struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	u32 len;
 	u32 num_blocks;
+	const u8 *fw;
 	const struct firmware *fw_entry = NULL;
 	u32 block_size = dev->tx_blk_size;
 	int status = 0;
@@ -200,6 +201,10 @@ static int rsi_load_ta_instructions(stru
 		return status;
 	}
 
+	/* Copy firmware into DMA-accessible memory */
+	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
 	len = fw_entry->size;
 
 	if (len % 4)
@@ -210,7 +215,8 @@ static int rsi_load_ta_instructions(stru
 	rsi_dbg(INIT_ZONE, "%s: Instruction size:%d\n", __func__, len);
 	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
 
-	status = rsi_copy_to_card(common, fw_entry->data, len, num_blocks);
+	status = rsi_copy_to_card(common, fw, len, num_blocks);
+	kfree(fw);
 	release_firmware(fw_entry);
 	return status;
 }
--- a/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb_ops.c
@@ -146,7 +146,10 @@ static int rsi_load_ta_instructions(stru
 		return status;
 	}
 
+	/* Copy firmware into DMA-accessible memory */
 	fw = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
+	if (!fw)
+		return -ENOMEM;
 	len = fw_entry->size;
 
 	if (len % 4)
@@ -158,6 +161,7 @@ static int rsi_load_ta_instructions(stru
 	rsi_dbg(INIT_ZONE, "%s: num blocks: %d\n", __func__, num_blocks);
 
 	status = rsi_copy_to_card(common, fw, len, num_blocks);
+	kfree(fw);
 	release_firmware(fw_entry);
 	return status;
 }


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]