On Mon, Aug 31, 2015 at 11:54:13AM -0500, Felipe Balbi wrote: > On Mon, Aug 31, 2015 at 07:48:28PM +0300, ville.syrjala@xxxxxxxxxxxxxxx wrote: > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > > > > This reverts commit 8f2c9544aba636134303105ecb164190a39dece4. > > > > As it breaks g_ether on my Baytrail FFRD8 device. Everything starts out > > fine, but after a bit of data has been transferred it just stops > > flowing. > > > > Note that I do get a bunch of these "NOHZ: local_softirq_pending 08" > > when booting the machine, but I'm not really sure if they're related > > to this problem. > > I have a feeling your problem is elsewhere. We *are* completing one TRB > at a time. By reverting that commit you're just masking the real problem > and I'd rather get that one fixed. > > How do you reproduce your issue ? Just boot the system, it gets an IP from dnsmasq on my host, then I ssh into it and do something to produce a bit of console output, after which g_ether is dead. Eg. 'dmesg' a few times is enough to kill it. Here's what I have in my .config: CONFIG_USB_OTG=y CONFIG_USB_OTG_FSM=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_PCI=y CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 CONFIG_USB_LIBCOMPOSITE=y CONFIG_USB_U_ETHER=y CONFIG_USB_F_ECM=y CONFIG_USB_F_SUBSET=y CONFIG_USB_ETH=y -- Ville Syrjälä Intel OTC -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html