On Fri, 2015-28-08 at 01:57:00 UTC, Gavin Shan wrote:
> The config space of some PCI devices can't be accessed when their
> PEs are in frozen state. Otherwise, fenced PHB might be seen.
> Those PEs are identified with flag EEH_PE_CFG_RESTRICTED, meaing
> EEH_PE_CFG_BLOCKED is set automatically when the PE is put to
> frozen state (EEH_PE_ISOLATED). eeh_slot_error_detail() restores
> PCI device BARs with eeh_pe_restore_bars(), which then calls
> eeh_ops->restore_config() to reinitialize the PCI device in
> (OPAL) firmware. eeh_ops->restore_config() produces PCI config
> access that causes fenced PHB. The problem was reported on below
> adapter:
>
> 0001:01:00.0 0200: 14e4:168e (rev 10)
> 0001:01:00.0 Ethernet controller: Broadcom Corporation \
> NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10)
>
> This fixes the issue by skipping eeh_pe_restore_bars() in
> eeh_slot_error_detail() when EEH_PE_CFG_BLOCKED is set for the PE.
>
> Fixes: b6541db1 ("powerpc/eeh: Block PCI config access upon frozen PE")
> Cc: stable@xxxxxxxxxxxxxxx # v4.0+
> Reported-by: Manvanthara B. Puttashankar <mputtash@xxxxxxxxxx>
> Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx>
Applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/259800135c654a098d9f0adf
cheers
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html