On Fri, Aug 21, 2015 at 04:08:41PM +0100, Chris Wilson wrote:
> In order to flush the results from in-batch pipecontrol writes (used for
> example in glQuery) before declaring the batch complete (and so declaring
> the query results coherent), we need to set the FlushEnable bit in our
> flushing pipecontrol. The FlushEnable bit "waits until all previous
> writes of immediate data from post-sync circles are complete before
> executing the next command".
>
> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
Yeah makes as much sense as anything about pipecontrols.
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Though the spec makes me thing it would be even more appropriate if
we did the seqno write using a post-sync operation and followed it
with such a pipecontrol flush. But I've not actually played around
with this stuff, so can't say for sure.
Oh and we're also lacking DC flushes everywhere, in case someone
cares.
> ---
> drivers/gpu/drm/i915/intel_lrc.c | 1 +
> drivers/gpu/drm/i915/intel_ringbuffer.c | 2 ++
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index 01cf0ca21990..e0c19d75b196 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -1771,6 +1771,7 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request,
> if (flush_domains) {
> flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
> flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
> + flags |= PIPE_CONTROL_FLUSH_ENABLE;
> }
>
> if (invalidate_domains) {
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index c2392f6c4204..551af7399ca1 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -330,6 +330,7 @@ gen7_render_ring_flush(struct drm_i915_gem_request *req,
> if (flush_domains) {
> flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
> flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
> + flags |= PIPE_CONTROL_FLUSH_ENABLE;
> }
> if (invalidate_domains) {
> flags |= PIPE_CONTROL_TLB_INVALIDATE;
> @@ -401,6 +402,7 @@ gen8_render_ring_flush(struct drm_i915_gem_request *req,
> if (flush_domains) {
> flags |= PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH;
> flags |= PIPE_CONTROL_DEPTH_CACHE_FLUSH;
> + flags |= PIPE_CONTROL_FLUSH_ENABLE;
> }
> if (invalidate_domains) {
> flags |= PIPE_CONTROL_TLB_INVALIDATE;
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html