4.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shilpa Sreeramalu <shilpa.sreeramalu@xxxxxxxxx>
commit 412efa73dcd3bd03c1838c91e094533a95529039 upstream.
The usage_count variable was read before it was set to the correct
value, due to which the firmware load was failing. Because of this
IPC messages sent to the firmware were timing out causing a delay
of about 1 second while playing audio from the internal speakers.
With this patch the usage_count is read after the function call
pm_runtime_get_sync which will increment the usage_count variable
and the firmware load is successful and all the IPC messages are
processed correctly.
Signed-off-by: Shilpa Sreeramalu <shilpa.sreeramalu@xxxxxxxxx>
Signed-off-by: Fang, Yang A <yang.a.fang@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/soc/intel/atom/sst/sst_drv_interface.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/sound/soc/intel/atom/sst/sst_drv_interface.c
+++ b/sound/soc/intel/atom/sst/sst_drv_interface.c
@@ -42,6 +42,11 @@
#define MIN_FRAGMENT_SIZE (50 * 1024)
#define MAX_FRAGMENT_SIZE (1024 * 1024)
#define SST_GET_BYTES_PER_SAMPLE(pcm_wd_sz) (((pcm_wd_sz + 15) >> 4) << 1)
+#ifdef CONFIG_PM
+#define GET_USAGE_COUNT(dev) (atomic_read(&dev->power.usage_count))
+#else
+#define GET_USAGE_COUNT(dev) 1
+#endif
int free_stream_context(struct intel_sst_drv *ctx, unsigned int str_id)
{
@@ -141,15 +146,9 @@ static int sst_power_control(struct devi
int ret = 0;
int usage_count = 0;
-#ifdef CONFIG_PM
- usage_count = atomic_read(&dev->power.usage_count);
-#else
- usage_count = 1;
-#endif
-
if (state == true) {
ret = pm_runtime_get_sync(dev);
-
+ usage_count = GET_USAGE_COUNT(dev);
dev_dbg(ctx->dev, "Enable: pm usage count: %d\n", usage_count);
if (ret < 0) {
dev_err(ctx->dev, "Runtime get failed with err: %d\n", ret);
@@ -164,6 +163,7 @@ static int sst_power_control(struct devi
}
}
} else {
+ usage_count = GET_USAGE_COUNT(dev);
dev_dbg(ctx->dev, "Disable: pm usage count: %d\n", usage_count);
return sst_pm_runtime_put(ctx);
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html