From: Bernhard Bender <bernhard.bender@xxxxxxxxxxxx> This patch has been added to the 3.12 stable tree. If you have any objections, please let us know. =============== commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream. This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Suggested-by: Jakob Mustafa <jakob.mustafa@xxxxxxxxxxxx> Signed-off-by: Bernhard Bender <bernhard.bender@xxxxxxxxxxxx> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> Signed-off-by: Jiri Slaby <jslaby@xxxxxxx> --- drivers/input/touchscreen/usbtouchscreen.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e565530e3596..5679cd9003cc 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -628,6 +628,9 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) goto err_out; } + /* TSC-25 data sheet specifies a delay after the RESET command */ + msleep(150); + /* set coordinate output rate */ buf[0] = buf[1] = 0xFF; ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0), -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html