Hi, I have a problem with recently released 3.2.45, and especially after commit 53e587aa5ca81497d0ea6e340320ec5778d1f311. On at least two boxes (Dell E4300 with GMA4500 and Thinkpad T61 with i965), as soon as i915 is loaded, backlight is switched of and doesn't reappear. The systems works fine, just no display. Dmesg of a boot with drm.debug=0xf is attached. Note that it seems that "found %d bytes of stolen memory at %08lx\n" message is never printed, so I guess i915_stolen_to_physical() somehow returns 0 but I didn't yet instrumented the code to check that. My guess would be that if base of stolen memory is not correctly detected on these boxes and then the aperture is too small for anything (thus the *ERROR* message). I've tried mainline and 3.8.13 (which has the commit backported) and both seem fine so I'm only mailing stable@ for now. Ben Hutchings is already aware of my issue and helped me debug a bit. If I need to put someone else in the loop (like other people from i915 team), please tell me. I might try to do a bisect between 53e587aa5ca81497d0ea6e340320ec5778d1f311 and e12a2d53ae45a69aea499b64f75e7222cca0f12f but I'm not too sure what I'll get. Regards, -- Yves-Alexis
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.45 (yaperez@oban) (gcc version 4.7.3 (Debian 4.7.3-4) ) #4 SMP Fri May 17 14:24:31 CEST 2013 [ 0.000000] Command line: initrd=/initrd.img-3.2.45 root=/dev/mapper/macallan-root ro drm.debug=0xf BOOT_IMAGE=/vmlinuz-3.2.45 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d04d400 (usable) [ 0.000000] BIOS-e820: 000000007d04d400 - 000000007d04f400 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d04f400 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe60000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Dell Inc. Latitude E4300 /0N880D, BIOS A24 12/06/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7d04d max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 800000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 07DC00000 mask FFFC00000 uncachable [ 0.000000] 3 base 07E000000 mask FFE000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 000000007dc00000 - 0000000080000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007d04d000 [ 0.000000] 0000000000 - 007d000000 page 2M [ 0.000000] 007d000000 - 007d04d000 page 4k [ 0.000000] kernel direct mapping tables up to 7d04d000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 7c856000 - 7d04c000 [ 0.000000] ACPI: RSDP 00000000000fb9f0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 000000007d051e00 00074 (v01 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: FACP 000000007d051c9c 000F4 (v04 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: DSDT 000000007d052400 068DD (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 000000007d060c00 00040 [ 0.000000] ACPI: HPET 000000007d051f00 00038 (v01 DELL M09 00000001 ASL 00000061) [ 0.000000] ACPI: DMAR 000000007d060400 000F8 (v01 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: APIC 000000007d052000 00068 (v01 DELL M09 27DB0C06 ASL 00000047) [ 0.000000] ACPI: ASF! 000000007d051c00 0006A (v32 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: MCFG 000000007d051fc0 0003C (v16 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: TCPA 000000007d052300 00032 (v01 00000000 ASL 00000000) [ 0.000000] ACPI: SLIC 000000007d05209c 00176 (v01 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: BOOT 000000007d051bc0 00028 (v01 DELL M09 27DB0C06 ASL 00000061) [ 0.000000] ACPI: SSDT 000000007d050331 0066C (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007a000000-ffff88007bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007d04d [ 0.000000] On node 0 totalpages: 511964 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7938 pages used for memmap [ 0.000000] DMA32 zone: 500043 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007c600000 s75200 r8192 d23104 u1048576 [ 0.000000] pcpu-alloc: s75200 r8192 d23104 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503957 [ 0.000000] Kernel command line: initrd=/initrd.img-3.2.45 root=/dev/mapper/macallan-root ro drm.debug=0xf BOOT_IMAGE=/vmlinuz-3.2.45 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1995800k/2048308k available (2793k kernel code, 452k absent, 52056k reserved, 3705k data, 440k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2261.079 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4522.15 BogoMIPS (lpj=9044316) [ 0.004118] pid_max: default: 32768 minimum: 301 [ 0.004210] Mount-cache hash table entries: 256 [ 0.004391] Initializing cgroup subsys cpuacct [ 0.004448] Initializing cgroup subsys devices [ 0.004503] Initializing cgroup subsys freezer [ 0.004558] Initializing cgroup subsys net_cls [ 0.004640] CPU: Physical Processor ID: 0 [ 0.004693] CPU: Processor Core ID: 0 [ 0.004749] mce: CPU supports 6 MCE banks [ 0.004810] CPU0: Thermal monitoring enabled (TM2) [ 0.004866] using mwait in idle threads. [ 0.004950] ACPI: Core revision 20110623 [ 0.012465] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.055847] CPU0: Intel(R) Core(TM)2 Duo CPU P9300 @ 2.26GHz stepping 06 [ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.056003] ... version: 2 [ 0.056003] ... bit width: 40 [ 0.056003] ... generic registers: 2 [ 0.056003] ... value mask: 000000ffffffffff [ 0.056003] ... max period: 000000007fffffff [ 0.056003] ... fixed-purpose events: 3 [ 0.056003] ... event mask: 0000000700000003 [ 0.056003] Booting Node 0, Processors #1 Ok. [ 0.056003] smpboot cpu 1: start_ip = 9a000 [ 0.148021] Brought up 2 CPUs [ 0.148079] Total of 2 processors activated (9044.13 BogoMIPS). [ 0.151447] devtmpfs: initialized [ 0.151447] PM: Registering ACPI NVS region at 7d04d400 (8192 bytes) [ 0.152070] print_constraints: dummy: [ 0.152171] NET: Registered protocol family 16 [ 0.152332] ACPI: bus type pci registered [ 0.152444] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.152518] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.156277] PCI: Using configuration type 1 for base access [ 0.156343] dmi type 0xB1 record - unknown flag [ 0.156766] bio: create slab <bio-0> at 0 [ 0.156766] ACPI: Added _OSI(Module Device) [ 0.156766] ACPI: Added _OSI(Processor Device) [ 0.156766] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.156766] ACPI: Added _OSI(Processor Aggregator Device) [ 0.157293] ACPI: EC: Look up EC in DSDT [ 0.176103] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.180968] ACPI Warning: Incorrect checksum in table [TCPA] - 0x58, should be 0xFC (20110623/tbutils-314) [ 0.181372] ACPI: SSDT 000000007d05099d 00281 (v01 PmRef BspIst 00003000 INTL 20050624) [ 0.181759] ACPI: Dynamic OEM Table Load: [ 0.181897] ACPI: SSDT (null) 00281 (v01 PmRef BspIst 00003000 INTL 20050624) [ 0.182164] ACPI: SSDT 000000007d050df5 005C6 (v01 PmRef BspCst 00003001 INTL 20050624) [ 0.182533] ACPI: Dynamic OEM Table Load: [ 0.182671] ACPI: SSDT (null) 005C6 (v01 PmRef BspCst 00003001 INTL 20050624) [ 0.183062] ACPI: SSDT 000000007d050c1e 001D7 (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.183463] ACPI: Dynamic OEM Table Load: [ 0.183600] ACPI: SSDT (null) 001D7 (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.183833] ACPI: SSDT 000000007d0513bb 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.184235] ACPI: Dynamic OEM Table Load: [ 0.184373] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.184118] ACPI: Interpreter enabled [ 0.184149] ACPI: (supports S0 S3 S4 S5) [ 0.184382] ACPI: Using IOAPIC for interrupt routing [ 0.287342] ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930 [ 0.294282] ACPI: No dock devices found. [ 0.294342] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.307810] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.334390] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.334452] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.334512] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.334583] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.334654] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xf7ffffff] [ 0.334725] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.334796] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.334867] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.334938] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.335009] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.335080] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.335150] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.335221] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] [ 0.335304] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 [ 0.335346] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 [ 0.335358] pci 0000:00:02.0: reg 10: [mem 0xf6c00000-0xf6ffffff 64bit] [ 0.335365] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.335371] pci 0000:00:02.0: reg 20: [io 0xef98-0xef9f] [ 0.335405] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 [ 0.335415] pci 0000:00:02.1: reg 10: [mem 0xf6b00000-0xf6bfffff 64bit] [ 0.335504] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200 [ 0.335529] pci 0000:00:19.0: reg 10: [mem 0xf6ae0000-0xf6afffff] [ 0.335540] pci 0000:00:19.0: reg 14: [mem 0xf6adb000-0xf6adbfff] [ 0.335552] pci 0000:00:19.0: reg 18: [io 0xefe0-0xefff] [ 0.335641] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.335646] pci 0000:00:19.0: PME# disabled [ 0.335670] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.335726] pci 0000:00:1a.0: reg 20: [io 0x6f60-0x6f7f] [ 0.335794] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.335850] pci 0000:00:1a.1: reg 20: [io 0x6f80-0x6f9f] [ 0.335920] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.335975] pci 0000:00:1a.2: reg 20: [io 0x6fa0-0x6fbf] [ 0.336064] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.336090] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.336200] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.336206] pci 0000:00:1a.7: PME# disabled [ 0.336237] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.336258] pci 0000:00:1b.0: reg 10: [mem 0xf6adc000-0xf6adffff 64bit] [ 0.336355] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.336359] pci 0000:00:1b.0: PME# disabled [ 0.336387] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.336490] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.336495] pci 0000:00:1c.0: PME# disabled [ 0.336525] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 [ 0.336627] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.336632] pci 0000:00:1c.1: PME# disabled [ 0.336663] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 [ 0.336765] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.336770] pci 0000:00:1c.3: PME# disabled [ 0.336805] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.336861] pci 0000:00:1d.0: reg 20: [io 0x6f00-0x6f1f] [ 0.336929] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.336984] pci 0000:00:1d.1: reg 20: [io 0x6f20-0x6f3f] [ 0.337053] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.337109] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.337188] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.337214] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.337322] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.337328] pci 0000:00:1d.7: PME# disabled [ 0.337353] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.337444] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 [ 0.337610] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 [ 0.337638] pci 0000:00:1f.2: reg 10: [io 0x6e70-0x6e77] [ 0.337649] pci 0000:00:1f.2: reg 14: [io 0x6e78-0x6e7b] [ 0.337661] pci 0000:00:1f.2: reg 18: [io 0x6e80-0x6e87] [ 0.337672] pci 0000:00:1f.2: reg 1c: [io 0x6e88-0x6e8b] [ 0.337683] pci 0000:00:1f.2: reg 20: [io 0x6ea0-0x6ebf] [ 0.337695] pci 0000:00:1f.2: reg 24: [mem 0xfed1c800-0xfed1cfff] [ 0.337764] pci 0000:00:1f.2: PME# supported from D3hot [ 0.337769] pci 0000:00:1f.2: PME# disabled [ 0.337792] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.337813] pci 0000:00:1f.3: reg 10: [mem 0xf6adaf00-0xf6adafff 64bit] [ 0.337843] pci 0000:00:1f.3: reg 20: [io 0x1100-0x111f] [ 0.337937] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.339786] pci 0000:0c:00.0: [8086:4232] type 0 class 0x000280 [ 0.339830] pci 0000:0c:00.0: reg 10: [mem 0xf69fe000-0xf69fffff 64bit] [ 0.340064] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold [ 0.340091] pci 0000:0c:00.0: PME# disabled [ 0.348064] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.348129] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff] [ 0.348192] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.348253] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.348258] pci 0000:00:1c.3: bridge window [mem 0xf6600000-0xf68fffff] [ 0.348266] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.348311] pci 0000:02:01.0: [1180:0832] type 0 class 0x000c00 [ 0.348333] pci 0000:02:01.0: reg 10: [mem 0xf65ff800-0xf65fffff] [ 0.348425] pci 0000:02:01.0: supports D1 D2 [ 0.348427] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.348432] pci 0000:02:01.0: PME# disabled [ 0.348454] pci 0000:02:01.1: [1180:0822] type 0 class 0x000805 [ 0.348475] pci 0000:02:01.1: reg 10: [mem 0xf65ff600-0xf65ff6ff] [ 0.348567] pci 0000:02:01.1: supports D1 D2 [ 0.348569] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.348574] pci 0000:02:01.1: PME# disabled [ 0.348594] pci 0000:02:01.2: [1180:0843] type 0 class 0x000880 [ 0.348615] pci 0000:02:01.2: reg 10: [mem 0xf65ff700-0xf65ff7ff] [ 0.348707] pci 0000:02:01.2: supports D1 D2 [ 0.348709] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.348714] pci 0000:02:01.2: PME# disabled [ 0.348781] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.348847] pci 0000:00:1e.0: bridge window [mem 0xf6500000-0xf65fffff] [ 0.348855] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.348858] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.348861] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.348864] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.348867] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode) [ 0.348869] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.348872] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.348875] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.348878] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.348881] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.348884] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.348887] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.348889] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) [ 0.348915] pci_bus 0000:00: on NUMA node 0 [ 0.348918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.349191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.349286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.349332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.349381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.349428] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.349488] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.349560] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.359099] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11) [ 0.359384] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3 [ 0.359707] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11) [ 0.359990] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 0.360341] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.360948] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.361555] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.362153] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.362964] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.362964] vgaarb: loaded [ 0.362964] vgaarb: bridge control possible 0000:00:02.0 [ 0.362964] PCI: Using ACPI for IRQ routing [ 0.365552] PCI: pci_cache_line_size set to 64 bytes [ 0.365694] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.365697] reserve RAM buffer: 000000007d04d400 - 000000007fffffff [ 0.365798] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.365863] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.366124] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.372124] Switching to clocksource hpet [ 0.373528] pnp: PnP ACPI init [ 0.373593] ACPI: bus type pnp registered [ 0.386558] pnp 00:00: [bus 00-ff] [ 0.386561] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.386564] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.386566] pnp 00:00: [io 0x0d00-0xffff window] [ 0.386569] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.386571] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.386574] pnp 00:00: [mem 0x80000000-0xf7ffffff window] [ 0.386576] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.386579] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.386581] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.386584] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.386586] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.386589] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.386591] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.386594] pnp 00:00: [mem 0xffc00000-0xffdfffff window] [ 0.386644] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.386667] pnp 00:01: [irq 12] [ 0.386694] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.386710] pnp 00:02: [io 0x0060] [ 0.386712] pnp 00:02: [io 0x0064] [ 0.386714] pnp 00:02: [io 0x0062] [ 0.386716] pnp 00:02: [io 0x0066] [ 0.386722] pnp 00:02: [irq 1] [ 0.386745] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.386760] pnp 00:03: [io 0x0070-0x0071] [ 0.386766] pnp 00:03: [irq 8] [ 0.386769] pnp 00:03: [io 0x0072-0x0077] [ 0.386794] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.386811] pnp 00:04: [io 0x0061] [ 0.386813] pnp 00:04: [io 0x0063] [ 0.386815] pnp 00:04: [io 0x0065] [ 0.386817] pnp 00:04: [io 0x0067] [ 0.386840] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.386855] pnp 00:05: [io 0x002e-0x002f] [ 0.386857] pnp 00:05: [io 0x0c80-0x0caf] [ 0.386859] pnp 00:05: [io 0x0cc0-0x0cff] [ 0.386903] system 00:05: [io 0x0c80-0x0caf] has been reserved [ 0.386964] system 00:05: [io 0x0cc0-0x0cff] could not be reserved [ 0.387024] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.387042] pnp 00:06: [dma 4] [ 0.387044] pnp 00:06: [io 0x0000-0x000f] [ 0.387046] pnp 00:06: [io 0x0080-0x0085] [ 0.387049] pnp 00:06: [io 0x0087-0x008f] [ 0.387051] pnp 00:06: [io 0x00c0-0x00df] [ 0.387053] pnp 00:06: [io 0x0010-0x001f] [ 0.387055] pnp 00:06: [io 0x0090-0x0091] [ 0.387057] pnp 00:06: [io 0x0093-0x009f] [ 0.387085] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.387100] pnp 00:07: [io 0x00f0-0x00ff] [ 0.387106] pnp 00:07: [irq 13] [ 0.387132] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.387169] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.387213] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.387275] system 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.396285] pnp 00:09: [mem 0xfed40000-0xfed44fff] [ 0.396287] pnp 00:09: [io 0x0cb0-0x0cbb] [ 0.396315] pnp 00:09: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active) [ 0.405539] pnp 00:0a: [io 0x0900-0x092f] [ 0.405542] pnp 00:0a: [io 0x0931-0x0933] [ 0.405544] pnp 00:0a: [io 0x0935-0x097f] [ 0.405546] pnp 00:0a: [io 0x0092] [ 0.405548] pnp 00:0a: [io 0x00b2-0x00b3] [ 0.405550] pnp 00:0a: [io 0x0020-0x0021] [ 0.405552] pnp 00:0a: [io 0x00a0-0x00a1] [ 0.405554] pnp 00:0a: [irq 0 disabled] [ 0.405556] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.405558] pnp 00:0a: [io 0x1000-0x1005] [ 0.405561] pnp 00:0a: [io 0x1008-0x100f] [ 0.405628] system 00:0a: [io 0x0900-0x092f] has been reserved [ 0.405688] system 00:0a: [io 0x0931-0x0933] has been reserved [ 0.405748] system 00:0a: [io 0x0935-0x097f] has been reserved [ 0.405808] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.405868] system 00:0a: [io 0x1000-0x1005] has been reserved [ 0.405928] system 00:0a: [io 0x1008-0x100f] has been reserved [ 0.405988] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.406005] pnp 00:0b: [io 0xf400-0xf4fe] [ 0.406007] pnp 00:0b: [io 0x0086] [ 0.406009] pnp 00:0b: [io 0x1006-0x1007] [ 0.406011] pnp 00:0b: [io 0x100a-0x1059] [ 0.406013] pnp 00:0b: [io 0x1060-0x107f] [ 0.406015] pnp 00:0b: [io 0x1080-0x10bf] [ 0.406017] pnp 00:0b: [io 0x1100-0x111f] [ 0.406020] pnp 00:0b: [io 0x1010-0x102f] [ 0.406022] pnp 00:0b: [io 0x0809] [ 0.406084] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.406144] system 00:0b: [io 0x1006-0x1007] has been reserved [ 0.406204] system 00:0b: [io 0x100a-0x1059] could not be reserved [ 0.406264] system 00:0b: [io 0x1060-0x107f] has been reserved [ 0.406323] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.406383] system 00:0b: [io 0x1100-0x111f] has been reserved [ 0.406443] system 00:0b: [io 0x1010-0x102f] has been reserved [ 0.406502] system 00:0b: [io 0x0809] has been reserved [ 0.406561] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.423320] pnp 00:0c: [mem 0x00000000-0x0009efff] [ 0.423325] pnp 00:0c: [mem 0x0009f000-0x0009ffff] [ 0.423327] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.423329] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.423332] pnp 00:0c: [mem 0x00100000-0x7d04d3ff] [ 0.423334] pnp 00:0c: [mem 0x7d04d400-0x7dafffff] [ 0.423336] pnp 00:0c: [mem 0x7db00000-0x7dbfffff] [ 0.423338] pnp 00:0c: [mem 0xffe00000-0xffffffff] [ 0.423341] pnp 00:0c: [mem 0xffa00000-0xffbfffff] [ 0.423343] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] [ 0.423345] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] [ 0.423347] pnp 00:0c: [mem 0xfed20000-0xfed3ffff] [ 0.423350] pnp 00:0c: [mem 0xfed45000-0xfed8ffff] [ 0.423352] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] [ 0.423354] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] [ 0.423356] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] [ 0.423359] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] [ 0.423361] pnp 00:0c: [mem 0xfed1c800-0xfed1cfff] [ 0.423363] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] [ 0.423365] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.423449] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.423511] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.423573] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.423634] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.423695] system 00:0c: [mem 0x00100000-0x7d04d3ff] could not be reserved [ 0.423756] system 00:0c: [mem 0x7d04d400-0x7dafffff] could not be reserved [ 0.423818] system 00:0c: [mem 0x7db00000-0x7dbfffff] has been reserved [ 0.423878] system 00:0c: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.423940] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.424016] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.424077] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.424138] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.424199] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.424260] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.424320] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.424381] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.424442] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.424503] system 00:0c: [mem 0xfed1c800-0xfed1cfff] has been reserved [ 0.424563] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.424624] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.424686] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.426928] pnp: PnP ACPI: found 13 devices [ 0.426985] ACPI: ACPI bus type pnp unregistered [ 0.433947] PCI: max bus depth: 1 pci_try_num: 2 [ 0.433991] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.434065] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] [ 0.434126] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80200000-0x803fffff] [ 0.434188] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref] [ 0.434261] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.434321] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b] [ 0.434380] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.434444] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff] [ 0.434507] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.434584] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c] [ 0.434644] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.434707] pci 0000:00:1c.1: bridge window [mem 0xf6900000-0xf69fffff] [ 0.434770] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.434847] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e] [ 0.434906] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] [ 0.434970] pci 0000:00:1c.3: bridge window [mem 0xf6600000-0xf68fffff] [ 0.435033] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.435110] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.435172] pci 0000:00:1e.0: bridge window [mem 0xf6500000-0xf65fffff] [ 0.435251] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.435315] pci 0000:00:1c.0: setting latency timer to 64 [ 0.435326] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.435389] pci 0000:00:1c.1: setting latency timer to 64 [ 0.435399] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.435463] pci 0000:00:1c.3: setting latency timer to 64 [ 0.435471] pci 0000:00:1e.0: setting latency timer to 64 [ 0.435475] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.435477] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.435480] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.435482] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.435485] pci_bus 0000:00: resource 8 [mem 0x80000000-0xf7ffffff] [ 0.435487] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.435490] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.435492] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.435495] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.435497] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed44fff] [ 0.435500] pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfedfffff] [ 0.435502] pci_bus 0000:00: resource 15 [mem 0xfee10000-0xff9fffff] [ 0.435504] pci_bus 0000:00: resource 16 [mem 0xffc00000-0xffdfffff] [ 0.435507] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] [ 0.435509] pci_bus 0000:0b: resource 1 [mem 0x80200000-0x803fffff] [ 0.435512] pci_bus 0000:0b: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.435515] pci_bus 0000:0c: resource 0 [io 0x2000-0x2fff] [ 0.435517] pci_bus 0000:0c: resource 1 [mem 0xf6900000-0xf69fffff] [ 0.435520] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.435522] pci_bus 0000:0d: resource 0 [io 0xd000-0xdfff] [ 0.435525] pci_bus 0000:0d: resource 1 [mem 0xf6600000-0xf68fffff] [ 0.435527] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.435530] pci_bus 0000:02: resource 1 [mem 0xf6500000-0xf65fffff] [ 0.435532] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.435535] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.435537] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.435540] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff] [ 0.435542] pci_bus 0000:02: resource 8 [mem 0x80000000-0xf7ffffff] [ 0.435545] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.435547] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.435549] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.435552] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.435554] pci_bus 0000:02: resource 13 [mem 0xfed40000-0xfed44fff] [ 0.435557] pci_bus 0000:02: resource 14 [mem 0xfeda7000-0xfedfffff] [ 0.435559] pci_bus 0000:02: resource 15 [mem 0xfee10000-0xff9fffff] [ 0.435562] pci_bus 0000:02: resource 16 [mem 0xffc00000-0xffdfffff] [ 0.435596] NET: Registered protocol family 2 [ 0.435697] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.436019] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.437257] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437673] TCP: Hash tables configured (established 262144 bind 65536) [ 0.437733] TCP reno registered [ 0.437790] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.437863] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.438007] NET: Registered protocol family 1 [ 0.438080] pci 0000:00:02.0: Boot video device [ 0.438103] pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.438183] pci 0000:00:1a.0: PCI INT A disabled [ 0.438251] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.438329] pci 0000:00:1a.1: PCI INT B disabled [ 0.438396] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.438474] pci 0000:00:1a.2: PCI INT C disabled [ 0.438539] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.438625] pci 0000:00:1a.7: PCI INT C disabled [ 0.438700] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.438778] pci 0000:00:1d.0: PCI INT A disabled [ 0.438841] pci 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.438919] pci 0000:00:1d.1: PCI INT B disabled [ 0.438983] pci 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.439061] pci 0000:00:1d.2: PCI INT C disabled [ 0.439126] pci 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.439200] pci 0000:00:1d.7: PCI INT A disabled [ 0.439303] PCI: CLS 64 bytes, default 64 [ 0.439353] Unpacking initramfs... [ 0.598005] Freeing initrd memory: 8152k freed [ 0.600824] Simple Boot Flag at 0x79 set to 0x1 [ 0.601278] audit: initializing netlink socket (disabled) [ 0.601346] type=2000 audit(1368794036.596:1): initialized [ 0.601668] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.603544] VFS: Disk quotas dquot_6.5.2 [ 0.603654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.603805] msgmni has been set to 3913 [ 0.604075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.604147] io scheduler noop registered [ 0.604203] io scheduler deadline registered [ 0.604292] io scheduler cfq registered (default) [ 0.604436] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.604494] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.604569] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.604621] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.604696] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.604747] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.604965] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.716405] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.717220] i8042: Warning: Keylock active [ 0.720476] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.720538] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.720718] mousedev: PS/2 mouse device common for all mice [ 0.720823] rtc_cmos 00:03: RTC can wake from S4 [ 0.720991] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.721089] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.721159] cpuidle: using governor ladder [ 0.721225] cpuidle: using governor menu [ 0.721532] TCP cubic registered [ 0.721701] NET: Registered protocol family 10 [ 0.722211] Mobile IPv6 [ 0.722278] NET: Registered protocol family 17 [ 0.722344] NET: Registered protocol family 33 [ 0.722404] lib80211: common routines for IEEE802.11 drivers [ 0.722463] lib80211_crypt: registered algorithm 'NULL' [ 0.722589] registered taskstats version 1 [ 0.722887] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.723079] rtc_cmos 00:03: setting system clock to 2013-05-17 12:33:57 UTC (1368794037) [ 0.724164] Freeing unused kernel memory: 440k freed [ 0.724360] Write protecting the kernel read-only data: 6144k [ 0.730255] Freeing unused kernel memory: 1296k freed [ 0.733764] Freeing unused kernel memory: 952k freed [ 0.804450] udevd[49]: starting version 175 [ 0.833482] Linux agpgart interface v0.103 [ 0.834026] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.834165] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.836256] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.846092] SCSI subsystem initialized [ 0.846328] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.847161] [drm] Initialized drm 1.1.0 20060810 [ 0.847912] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.849870] libata version 3.00 loaded. [ 0.850347] ACPI: Lid Switch [LID] [ 0.850455] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.850531] ACPI: Power Button [PBTN] [ 0.850537] ahci 0000:00:1f.2: version 3.0 [ 0.850551] ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.850625] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.850668] ahci: SSS flag set, parallel bus scan disabled [ 0.850717] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.850720] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 0.850726] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.857622] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 0.857702] ACPI: Sleep Button [SBTN] [ 0.868524] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.868585] ACPI: Thermal Zone [THM] (53 C) [ 0.878332] scsi0 : ahci [ 0.880398] [drm:drm_pci_init], [ 0.891854] scsi1 : ahci [ 0.894340] scsi2 : ahci [ 0.894471] scsi3 : ahci [ 0.894589] scsi4 : ahci [ 0.894706] scsi5 : ahci [ 0.894984] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900 irq 43 [ 0.895058] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980 irq 43 [ 0.895129] ata3: DUMMY [ 0.895184] ata4: DUMMY [ 0.895241] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00 irq 43 [ 0.895316] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80 irq 43 [ 0.895435] [drm:drm_get_pci_dev], [ 0.895449] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.895515] i915 0000:00:02.0: setting latency timer to 64 [ 0.895543] [drm:drm_get_minor], [ 0.895673] [drm:drm_get_minor], new minor assigned 64 [ 0.895675] [drm:drm_get_minor], [ 0.895785] [drm:drm_get_minor], new minor assigned 0 [ 0.918799] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 0.918873] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.919192] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7d04d400 [ 0.919202] [drm:intel_opregion_setup], Public ACPI methods supported [ 0.919205] [drm:intel_opregion_setup], SWSCI supported [ 0.919207] [drm:intel_opregion_setup], ASLE supported [ 0.919235] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 0.919239] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.919299] [drm] Driver supports precise vblank timestamp query. [ 0.919363] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 0.919366] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d [ 0.919369] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0 [ 0.919373] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 0.919378] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 0.919380] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 82500 1280 1352 1480 1655 800 803 809 831 0x8 0xa [ 0.919386] [drm:parse_lfp_panel_data], VBT initial LVDS value 42200300 [ 0.919389] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 0.919391] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 0.919396] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 0.919405] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 0.919420] [drm:intel_modeset_init], 2 display pipes available. [ 0.919431] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.970847] [drm:drm_sysfs_connector_add], adding "LVDS-1" to sysfs [ 0.970872] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.970883] [drm:intel_panel_get_backlight], get backlight PWM = 51765 [ 0.970886] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 0.970911] [drm:intel_panel_get_backlight], get backlight PWM = 51765 [ 0.970914] [drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs [ 0.970935] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.970945] [drm:intel_setup_outputs], probing SDVOB [ 0.972904] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.972907] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 0.972927] [drm:intel_setup_outputs], probing HDMI on SDVOB [ 0.972936] [drm:drm_sysfs_connector_add], adding "HDMI-A-1" to sysfs [ 0.972956] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.972965] [drm:intel_setup_outputs], probing DP_B [ 0.972969] [drm:drm_sysfs_connector_add], adding "DP-1" to sysfs [ 0.972987] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.972996] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 0.973497] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 0.973499] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.973999] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 0.974001] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.974022] [drm:intel_setup_outputs], probing SDVOC [ 0.975950] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 0.975953] [drm:intel_sdvo_init], No SDVO device found on SDVOC [ 0.975970] [drm:intel_setup_outputs], probing HDMI on SDVOC [ 0.975976] [drm:drm_sysfs_connector_add], adding "HDMI-A-2" to sysfs [ 0.976015] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.976024] [drm:intel_setup_outputs], probing DP_C [ 0.976028] [drm:drm_sysfs_connector_add], adding "DP-2" to sysfs [ 0.976050] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.976058] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 0.976558] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 0.976560] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.977059] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 0.977062] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.977082] [drm:intel_setup_outputs], probing DP_D [ 0.977087] [drm:drm_sysfs_connector_add], adding "DP-3" to sysfs [ 0.977108] [drm:drm_sysfs_hotplug_event], generating hotplug event [ 0.977116] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 0.977616] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 0.977618] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.978117] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 0.978120] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 0.978140] [drm:intel_tv_init], Integrated TV is not present. [ 0.978144] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 0.978147] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 1.256019] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 1.264015] [drm:intel_update_fbc], [ 1.264017] [drm:intel_update_fbc], no output, disabling [ 1.264020] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 1.264026] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.264029] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 1.264032] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.264037] [drm:intel_update_fbc], [ 1.264039] [drm:intel_update_fbc], no output, disabling [ 1.264041] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 1.264049] [drm:drm_irq_install], irq=44 [ 1.264069] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 1.264072] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 1.264077] [drm:i915_driver_irq_handler], pipe A underrun [ 1.264080] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.264091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 1.264099] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 1.264103] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x800" 60 82500 1280 1352 1480 1655 800 803 809 831 0x48 0x9 [ 1.264107] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x800" 40 56300 1280 1352 1480 1694 800 803 809 831 0x40 0x9 [ 1.264112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 1.272015] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.272017] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 1.272021] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 1.273932] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 1.273935] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 1.273938] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 1.273941] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 1.273944] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 1.273947] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 1.275857] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 1.275860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 1.275863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [ 1.275866] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 1.275869] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [ 1.275872] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [ 1.276380] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 1.284510] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 1.292509] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 1.300012] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 1.300015] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [ 1.300019] [drm:drm_setup_crtcs], [ 1.300021] [drm:drm_enable_connectors], connector 5 enabled? yes [ 1.300024] [drm:drm_enable_connectors], connector 12 enabled? no [ 1.300026] [drm:drm_enable_connectors], connector 15 enabled? no [ 1.300029] [drm:drm_enable_connectors], connector 18 enabled? no [ 1.300031] [drm:drm_enable_connectors], connector 21 enabled? no [ 1.300034] [drm:drm_enable_connectors], connector 22 enabled? no [ 1.300036] [drm:drm_enable_connectors], connector 24 enabled? no [ 1.300039] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 1.300042] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 1.300044] [drm:drm_target_preferred], found mode 1280x800 [ 1.300046] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.300050] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 4 [ 1.300059] [drm:i915_gem_object_bind_to_gtt] *ERROR* Attempting to bind an object larger than the aperture [ 1.300134] [drm:intelfb_create] *ERROR* failed to pin fb: -7 [ 1.320903] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.327536] [drm:intel_opregion_asle_intr], non asle set request?? [ 1.329889] acpi device:35: registered as cooling_device0 [ 1.330449] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4 [ 1.330528] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.330601] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 1.330725] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.400026] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.401269] ata1.00: ATA-7: ST9120823ASG, 3.ADD, max UDMA/133 [ 1.401330] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 1.402841] ata1.00: configured for UDMA/133 [ 1.403012] scsi 0:0:0:0: Direct-Access ATA ST9120823ASG 3.AD PQ: 0 ANSI: 5 [ 1.600018] Refined TSC clocksource calibration: 2260.999 MHz. [ 1.600080] Switching to clocksource tsc [ 1.892018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.906244] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D300, max UDMA/100 [ 1.906305] ata2.00: applying bridge limits [ 1.919617] ata2.00: configured for UDMA/100 [ 1.921330] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633A D300 PQ: 0 ANSI: 5 [ 2.240015] ata5: SATA link down (SStatus 4 SControl 300) [ 2.560016] ata6: SATA link down (SStatus 4 SControl 300) [ 2.565980] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.566114] sd 0:0:0:0: [sda] Write Protect is off [ 2.566176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.566197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.585340] sda: sda1 sda2 [ 2.585647] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.982786] device-mapper: uevent: version 1.0.3 [ 2.983092] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx [ 11.336007] [drm:intel_crt_detect], CRT not detected via hotplug [ 11.336012] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [ 11.337927] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 11.337930] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [ 11.337934] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.337938] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [ 11.339848] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 11.339851] [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [ 11.339855] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.339858] [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [ 11.340368] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 11.348502] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 11.356502] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 11.364005] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 11.364008] [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2 [ 29.851003] Intel AES-NI instructions are not detected. [ 30.597039] PM: Starting manual resume from disk [ 30.635774] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 32.377056] udevd[428]: starting version 175 [ 32.773704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 32.773871] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) [ 32.773982] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 32.775729] ACPI: AC Adapter [AC] (on-line) [ 32.784578] Monitor-Mwait will be used to enter C-1 state [ 32.784585] Monitor-Mwait will be used to enter C-2 state [ 32.784590] Monitor-Mwait will be used to enter C-3 state [ 32.784594] Marking TSC unstable due to TSC halts in idle [ 32.784661] ACPI: acpi_idle registered with cpuidle [ 32.784768] Switching to clocksource hpet [ 32.845874] ACPI: Battery Slot [BAT0] (battery present) [ 32.846412] ACPI: Battery Slot [BAT1] (battery absent) [ 32.859734] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 32.975011] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 32.975077] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 32.975158] e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 32.975226] e1000e 0000:00:19.0: setting latency timer to 64 [ 32.975347] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 33.023143] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 33.073673] usbcore: registered new interface driver usbfs [ 33.073754] usbcore: registered new interface driver hub [ 33.080815] usbcore: registered new device driver usb [ 33.090837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 33.162352] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:70:f9:6d:70 [ 33.162425] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 33.162510] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 3002FF-0FF [ 33.162607] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 33.162888] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 33.162892] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 33.162974] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 33.163076] ehci_hcd 0000:00:1a.7: debug port 1 [ 33.167014] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 33.167033] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 33.170340] firewire_ohci 0000:02:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 33.180053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 33.180139] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 33.180208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.180279] usb usb1: Product: EHCI Host Controller [ 33.180337] usb usb1: Manufacturer: Linux 3.2.45 ehci_hcd [ 33.180395] usb usb1: SerialNumber: 0000:00:1a.7 [ 33.180568] hub 1-0:1.0: USB hub found [ 33.180629] hub 1-0:1.0: 6 ports detected [ 33.180769] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 33.180843] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 33.180846] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 33.180911] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 33.181008] ehci_hcd 0000:00:1d.7: debug port 1 [ 33.184962] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 33.186005] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 33.196750] uhci_hcd: USB Universal Host Controller Interface driver [ 33.200055] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 33.200137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 33.200205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.200275] usb usb2: Product: EHCI Host Controller [ 33.200333] usb usb2: Manufacturer: Linux 3.2.45 ehci_hcd [ 33.200391] usb usb2: SerialNumber: 0000:00:1d.7 [ 33.200563] hub 2-0:1.0: USB hub found [ 33.200624] hub 2-0:1.0: 6 ports detected [ 33.201008] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 33.201079] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 33.201083] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 33.201147] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 33.201245] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60 [ 33.201335] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.201396] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.201467] usb usb3: Product: UHCI Host Controller [ 33.201524] usb usb3: Manufacturer: Linux 3.2.45 uhci_hcd [ 33.201582] usb usb3: SerialNumber: 0000:00:1a.0 [ 33.202016] hub 3-0:1.0: USB hub found [ 33.202076] hub 3-0:1.0: 2 ports detected [ 33.202212] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 33.202280] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 33.202284] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 33.202349] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 33.202458] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80 [ 33.202547] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.202608] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.202678] usb usb4: Product: UHCI Host Controller [ 33.202736] usb usb4: Manufacturer: Linux 3.2.45 uhci_hcd [ 33.202795] usb usb4: SerialNumber: 0000:00:1a.1 [ 33.203344] hub 4-0:1.0: USB hub found [ 33.203403] hub 4-0:1.0: 2 ports detected [ 33.205263] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 33.205330] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 33.205333] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 33.205397] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 33.205492] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0 [ 33.205583] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.205644] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.205714] usb usb5: Product: UHCI Host Controller [ 33.205772] usb usb5: Manufacturer: Linux 3.2.45 uhci_hcd [ 33.205830] usb usb5: SerialNumber: 0000:00:1a.2 [ 33.206001] hub 5-0:1.0: USB hub found [ 33.206062] hub 5-0:1.0: 2 ports detected [ 33.206180] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 33.206247] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 33.206250] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 33.206314] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 33.206410] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00 [ 33.206500] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.206561] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.206632] usb usb6: Product: UHCI Host Controller [ 33.206689] usb usb6: Manufacturer: Linux 3.2.45 uhci_hcd [ 33.206747] usb usb6: SerialNumber: 0000:00:1d.0 [ 33.206911] hub 6-0:1.0: USB hub found [ 33.206971] hub 6-0:1.0: 2 ports detected [ 33.207090] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 33.207157] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 33.207161] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 33.207224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 33.207321] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20 [ 33.207409] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.207470] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.207541] usb usb7: Product: UHCI Host Controller [ 33.207598] usb usb7: Manufacturer: Linux 3.2.45 uhci_hcd [ 33.207657] usb usb7: SerialNumber: 0000:00:1d.1 [ 33.207819] hub 7-0:1.0: USB hub found [ 33.207879] hub 7-0:1.0: 2 ports detected [ 33.207999] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 33.208082] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 33.208086] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 33.208152] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 33.208837] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 33.208927] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 33.208989] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 33.209060] usb usb8: Product: UHCI Host Controller [ 33.209118] usb usb8: Manufacturer: Linux 3.2.45 uhci_hcd [ 33.209179] usb usb8: SerialNumber: 0000:00:1d.2 [ 33.209966] hub 8-0:1.0: USB hub found [ 33.210025] hub 8-0:1.0: 2 ports detected [ 33.237140] firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 33.240942] tpm_tis 00:09: 1.2 TPM (device-id 0x2001, rev-id 48) [ 33.355103] cfg80211: Calling CRDA to update world regulatory domain [ 33.413059] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 33.413199] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 33.413227] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 33.426749] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 33.426815] Copyright(c) 2003-2011 Intel Corporation [ 33.426937] iwlwifi 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 33.427025] iwlwifi 0000:0c:00.0: setting latency timer to 64 [ 33.427044] iwlwifi 0000:0c:00.0: pci_resource_len = 0x00002000 [ 33.427103] iwlwifi 0000:0c:00.0: pci_resource_base = ffffc90015588000 [ 33.427163] iwlwifi 0000:0c:00.0: HW Revision ID = 0x0 [ 33.427333] iwlwifi 0000:0c:00.0: irq 47 for MSI/MSI-X [ 33.427412] iwlwifi 0000:0c:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 33.427578] iwlwifi 0000:0c:00.0: L1 Enabled; Disabling L0S [ 33.446881] iwlwifi 0000:0c:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 33.446948] iwlwifi 0000:0c:00.0: Device SKU: 0Xf0 [ 33.447028] iwlwifi 0000:0c:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 33.447167] iwlwifi 0000:0c:00.0: RF_KILL bit toggled to disable radio. [ 33.523303] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5 [ 33.524873] iwlwifi 0000:0c:00.0: request for firmware file 'iwlwifi-5000-5.ucode' failed. [ 33.527254] iwlwifi 0000:0c:00.0: request for firmware file 'iwlwifi-5000-4.ucode' failed. [ 33.529966] iwlwifi 0000:0c:00.0: request for firmware file 'iwlwifi-5000-3.ucode' failed. [ 33.540580] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6 [ 33.542496] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 33.581077] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 33.581173] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 33.601628] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 33.601857] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 33.602066] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 33.602417] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 33.602603] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 33.602789] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 33.620335] iwlwifi 0000:0c:00.0: Firmware has old API version, expected v5, got v2. [ 33.620412] iwlwifi 0000:0c:00.0: New firmware can be obtained from http://www.intellinuxwireless.org/. [ 33.620487] iwlwifi 0000:0c:00.0: loaded firmware version 8.24.2.12 [ 33.620889] Registered led device: phy0-led [ 33.654142] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 33.740182] firewire_core: created device fw0: GUID 444fc00033b02c90, S400 [ 33.804067] tpm_tis 00:09: Adjusting TPM timeout parameters. [ 33.876060] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 34.057595] usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800 [ 34.057661] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 34.057729] usb 5-1: Product: 5880 [ 34.057784] usb 5-1: Manufacturer: Broadcom Corp [ 34.057842] usb 5-1: SerialNumber: 0123456789ABCD [ 34.058009] usb 5-1: config 0 descriptor?? [ 35.331116] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 35.543330] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 35.886170] loop: module loaded [ 35.962661] i2c /dev entries driver [ 36.419360] Adding 1949692k swap on /dev/mapper/macallan-swap. Priority:-1 extents:1 across:1949692k [ 36.804328] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 38.390791] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.454387] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 38.470912] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 43.036229] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 43.096086] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 43.096404] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.319189] [drm:drm_stub_open], [ 43.319199] [drm:drm_open_helper], pid = 2983, minor = 0 [ 43.319209] [drm:i915_driver_open], [ 43.319218] [drm:drm_setup], [ 43.319272] [drm:drm_ioctl], pid=2983, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 43.319287] [drm:drm_ioctl], pid=2983, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1 [ 43.319317] [drm:drm_release], open_count = 1 [ 43.319324] [drm:drm_release], pid = 2983, device = 0xe200, open_count = 1 [ 43.319336] [drm:drm_lastclose], [ 43.319343] [drm:drm_crtc_helper_set_config], [ 43.319348] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 43.319360] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 43.319369] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 43.319398] [drm:intel_opregion_asle_intr], [ 43.319403] [drm:drm_crtc_helper_set_config], [ 43.319409] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 43.319415] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 43.319424] non asle set request?? [ 43.319427] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 43.319437] [drm:intel_opregion_asle_intr], non asle set request?? [ 43.319445] [drm:intel_opregion_asle_intr], [ 43.319449] [drm:drm_lastclose], driver lastclose completed [ 43.319455] [drm:drm_lastclose], non asle set request?? [ 43.319462] lastclose completed [ 43.319543] [drm:drm_stub_open], [ 43.319549] [drm:drm_open_helper], pid = 2983, minor = 0 [ 43.319557] [drm:i915_driver_open], [ 43.319564] [drm:drm_setup], [ 43.319628] [drm:drm_ioctl], pid=2983, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 43.319646] [drm:drm_ioctl], pid=2983, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [ 43.319657] [drm:drm_ioctl], pid=2983, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1 [ 43.319713] [drm:drm_ioctl], pid=2983, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1 [ 43.319731] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320045] [drm:drm_ioctl], pid=2983, cmd=0x80106463, nr=0x63, dev 0xe200, auth=1 [ 43.320072] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320089] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320103] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320117] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320131] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320145] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320158] [drm:i915_getparam], Unknown parameter 19 [ 43.320167] [drm:drm_ioctl], ret = ffffffea [ 43.320179] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320192] [drm:i915_getparam], Unknown parameter 17 [ 43.320200] [drm:drm_ioctl], ret = ffffffea [ 43.320233] [drm:drm_ioctl], pid=2983, cmd=0x6458, nr=0x58, dev 0xe200, auth=1 [ 43.320250] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.320265] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.322741] [drm:drm_ioctl], pid=2983, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [ 43.322754] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 43.322765] [drm:drm_ioctl], pid=2983, cmd=0xc04064a0, nr=0xa0, dev 0xe200, auth=1 [ 43.322776] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 43.322812] [drm:drm_ioctl], pid=2983, cmd=0xc06864a1, nr=0xa1, dev 0xe200, auth=1 [ 43.322830] [drm:drm_ioctl], pid=2983, cmd=0xc0086465, nr=0x65, dev 0xe200, auth=1 [ 43.322852] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.322890] [drm:drm_ioctl], pid=2983, cmd=0xc06864a1, nr=0xa1, dev 0xe200, auth=1 [ 43.322901] [drm:drm_ioctl], pid=2983, cmd=0xc0086465, nr=0x65, dev 0xe200, auth=1 [ 43.322912] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.322933] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.322943] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 43.322952] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 43.322981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 43.322989] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x800" 60 82500 1280 1352 1480 1655 800 803 809 831 0x48 0x9 [ 43.323002] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x800" 40 56300 1280 1352 1480 1694 800 803 809 831 0x40 0x9 [ 43.323017] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.323027] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 43.323042] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.327889] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.327901] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 43.327910] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 43.336241] [drm:intel_crt_detect], CRT not detected via hotplug [ 43.336252] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 43.336272] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.336282] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 43.336290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 43.344076] [drm:intel_crt_detect], CRT not detected via hotplug [ 43.344087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 43.344114] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.344222] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.344233] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 43.344242] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 43.346230] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 43.346238] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 43.346249] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.346258] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 43.346266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 43.348263] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 43.348271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 43.348284] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.348340] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.348350] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 43.348358] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 43.348367] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.348375] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 43.348385] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.348395] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 43.348402] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 43.348409] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.348417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 43.348428] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.348476] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.348486] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 43.348493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 43.350475] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 43.350483] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 43.350493] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.350503] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 43.350510] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 43.352514] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 43.352523] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 43.352535] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.352597] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.352607] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 43.352615] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [ 43.352623] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.352631] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [ 43.352641] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.352650] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 43.352658] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [ 43.352665] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.352673] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [ 43.352683] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.352730] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.352740] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 43.352748] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [ 43.353256] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.360564] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.368804] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.376057] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.376069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [ 43.376087] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.376097] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 43.376106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [ 43.376612] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.384820] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.392818] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.400372] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.400386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [ 43.400406] [drm:drm_ioctl], pid=2983, cmd=0xc01464a6, nr=0xa6, dev 0xe200, auth=1 [ 43.400531] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.400542] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 43.400551] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 43.400580] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 43.400588] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x800" 60 82500 1280 1352 1480 1655 800 803 809 831 0x48 0x9 [ 43.400601] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x800" 40 56300 1280 1352 1480 1694 800 803 809 831 0x40 0x9 [ 43.400615] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.400625] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 43.400784] [drm:drm_ioctl], pid=2983, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 43.400797] [drm:drm_ioctl], pid=2983, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 43.400824] [drm:drm_ioctl], pid=2983, cmd=0xc01064ac, nr=0xac, dev 0xe200, auth=1 [ 43.400836] [drm:drm_ioctl], pid=2983, cmd=0xc01064ac, nr=0xac, dev 0xe200, auth=1 [ 43.400852] [drm:drm_ioctl], pid=2983, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 43.400864] [drm:drm_ioctl], pid=2983, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 43.400885] [drm:drm_ioctl], pid=2983, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 43.400896] [drm:drm_ioctl], pid=2983, cmd=0xc04064aa, nr=0xaa, dev 0xe200, auth=1 [ 43.403210] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.403222] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 43.403231] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 43.416052] [drm:intel_crt_detect], CRT not detected via hotplug [ 43.416062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 43.416075] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.416085] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 43.416093] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 43.424237] [drm:intel_crt_detect], CRT not detected via hotplug [ 43.424245] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected [ 43.424341] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.424352] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 43.424360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 43.426344] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 43.426352] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 43.426363] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.426372] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 43.426379] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 43.428378] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 43.428386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 43.428438] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.428448] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 43.428456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 43.428463] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.428471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 43.428481] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.428491] [drm:drm_mode_getconnector], [CONNECTOR:18:?] [ 43.428498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] [ 43.428505] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.428513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected [ 43.428556] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.428565] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 43.428573] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 43.430554] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 43.430562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 43.430572] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.430581] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 43.430588] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 43.432583] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 43.432592] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 43.432641] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.432651] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 43.432659] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [ 43.432666] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.432674] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [ 43.432684] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.432693] [drm:drm_mode_getconnector], [CONNECTOR:22:?] [ 43.432700] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] [ 43.432707] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.432715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] disconnected [ 43.432758] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.432768] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 43.432775] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [ 43.433282] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.440722] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.448847] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.456298] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.456309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [ 43.456322] [drm:drm_ioctl], pid=2983, cmd=0xc05064a7, nr=0xa7, dev 0xe200, auth=1 [ 43.456332] [drm:drm_mode_getconnector], [CONNECTOR:24:?] [ 43.456340] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] [ 43.456846] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.464797] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.472548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 43.480093] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 43.480110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:24:DP-3] disconnected [ 43.480584] [drm:drm_ioctl], pid=2983, cmd=0xc0106446, nr=0x46, dev 0xe200, auth=1 [ 43.488188] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488221] [drm:drm_ioctl], pid=2983, cmd=0xc0106461, nr=0x61, dev 0xe200, auth=1 [ 43.488275] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488298] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488319] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488340] [drm:drm_ioctl], pid=2983, cmd=0x4020645d, nr=0x5d, dev 0xe200, auth=1 [ 43.488362] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488378] [drm:drm_ioctl], pid=2983, cmd=0x4020645d, nr=0x5d, dev 0xe200, auth=1 [ 43.488399] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488415] [drm:drm_ioctl], pid=2983, cmd=0x4020645d, nr=0x5d, dev 0xe200, auth=1 [ 43.488441] [drm:drm_ioctl], pid=2983, cmd=0xc010645b, nr=0x5b, dev 0xe200, auth=1 [ 43.488463] [drm:drm_ioctl], pid=2983, cmd=0xc020645e, nr=0x5e, dev 0xe200, auth=1 [ 43.488473] [drm:drm_ioctl], ret = fffffff9 [ 43.497501] [drm:drm_release], open_count = 1 [ 43.497505] [drm:drm_release], pid = 2983, device = 0xe200, open_count = 1 [ 43.497530] [drm:drm_lastclose], [ 43.497533] [drm:drm_crtc_helper_set_config], [ 43.497535] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB] [ 43.497539] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 43.497543] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 43.497559] [drm:intel_opregion_asle_intr], [ 43.497559] [drm:drm_crtc_helper_set_config], [ 43.497561] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB] [ 43.497563] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 43.497568] non asle set request?? [ 43.497567] [drm:intel_panel_get_max_backlight], max backlight PWM = 51765 [ 43.497592] [drm:drm_lastclose], driver lastclose completed [ 43.497594] [drm:drm_lastclose], lastclose completed [ 43.497622] [drm:intel_opregion_asle_intr], non asle set request?? [ 43.497626] [drm:intel_opregion_asle_intr], non asle set request?? [ 53.352268] [drm:intel_crt_detect], CRT not detected via hotplug [ 53.352280] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2 [ 53.354270] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 53.354279] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [ 53.354289] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 53.354297] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2 [ 53.356307] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc [ 53.356315] [drm:output_poll_execute], [CONNECTOR:21:HDMI-A-2] status updated from 2 to 2 [ 53.356325] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 53.356333] [drm:output_poll_execute], [CONNECTOR:22:DP-2] status updated from 2 to 2 [ 53.356842] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 53.364798] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 53.372819] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 53.380313] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 53.380323] [drm:output_poll_execute], [CONNECTOR:24:DP-3] status updated from 2 to 2
Attachment:
signature.asc
Description: This is a digitally signed message part