From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
Manual peak calibration is currently enabled only for
AR9462 and AR9565. This is also required for AR9485.
The initvals are also modified to disable HW peak calibration.
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 +-
drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 639ba7d..6988e1d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -965,7 +965,7 @@ static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah,
{
int i;
- if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah))
+ if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah))
return;
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
index 712f415..88ff1d7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -1020,7 +1020,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = {
{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
- {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+ {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
{0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982},
{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html