commit: ccd384b10420ac81ba3fb9b0a7d18272c7173552
From: Daniel Drake <dsd@xxxxxxxxxx>
Date: Wed, 8 May 2013 15:37:19 -0400
Subject: mwifiex: fix setting of multicast filter
A small bug in this code was causing the ALLMULTI filter to be set
when in fact we were just wanting to program a selective multicast list
to the hardware.
Fix that bug and remove a redundant if condition in the code that
follows.
This fixes wakeup behaviour when multicast WOL is enabled. Previously,
all multicast packets would wake up the system. Now, only those that the
host intended to receive trigger wakeups.
Signed-off-by: Daniel Drake <dsd@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Acked-by: Bing Zhao <bzhao@xxxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
---
drivers/net/wireless/mwifiex/sta_ioctl.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 311d0b2..1a8a19d 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -96,7 +96,7 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
} else {
/* Multicast */
priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
- if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) {
+ if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) {
dev_dbg(priv->adapter->dev,
"info: Enabling All Multicast!\n");
priv->curr_pkt_filter |=
@@ -108,20 +108,11 @@ int mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
dev_dbg(priv->adapter->dev,
"info: Set multicast list=%d\n",
mcast_list->num_multicast_addr);
- /* Set multicast addresses to firmware */
- if (old_pkt_filter == priv->curr_pkt_filter) {
- /* Send request to firmware */
- ret = mwifiex_send_cmd_async(priv,
- HostCmd_CMD_MAC_MULTICAST_ADR,
- HostCmd_ACT_GEN_SET, 0,
- mcast_list);
- } else {
- /* Send request to firmware */
- ret = mwifiex_send_cmd_async(priv,
- HostCmd_CMD_MAC_MULTICAST_ADR,
- HostCmd_ACT_GEN_SET, 0,
- mcast_list);
- }
+ /* Send multicast addresses to firmware */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_MAC_MULTICAST_ADR,
+ HostCmd_ACT_GEN_SET, 0,
+ mcast_list);
}
}
}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html