This is a note to let you know that I've just added the patch titled
drm/i915: set CPT FDI RX polarity bits based on VBT
to the 3.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
drm-i915-set-cpt-fdi-rx-polarity-bits-based-on-vbt.patch
and it can be found in the queue-3.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 3f704fa2778d3fe45e6529825a5c7a8bcbc686f4 Mon Sep 17 00:00:00 2001
From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Date: Mon, 8 Apr 2013 15:48:07 -0300
Subject: drm/i915: set CPT FDI RX polarity bits based on VBT
From: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
commit 3f704fa2778d3fe45e6529825a5c7a8bcbc686f4 upstream.
Check the VBT to see if the machine has inverted FDI RX polarity on
CPT. Based on this bit, set the appropriate bit on the TRANS_CHICKEN2
registers.
This should fix some machines that were showing black screens on all
outputs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60029
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Reviewed-by: Imre Deak <imre.deak@xxxxxxxxx>
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/i915_reg.h | 2 +-
drivers/gpu/drm/i915/intel_bios.c | 6 ++++--
drivers/gpu/drm/i915/intel_bios.h | 4 +++-
drivers/gpu/drm/i915/intel_pm.c | 9 +++++++--
5 files changed, 16 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -941,6 +941,7 @@ typedef struct drm_i915_private {
unsigned int int_crt_support:1;
unsigned int lvds_use_ssc:1;
unsigned int display_clock_mode:1;
+ unsigned int fdi_rx_polarity_inverted:1;
int lvds_ssc_freq;
unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
struct {
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3827,7 +3827,7 @@
#define _TRANSB_CHICKEN2 0xf1064
#define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2)
#define TRANS_CHICKEN2_TIMING_OVERRIDE (1<<31)
-
+#define TRANS_CHICKEN2_FDI_POLARITY_REVERSED (1<<29)
#define SOUTH_CHICKEN1 0xc2000
#define FDIA_PHASE_SYNC_SHIFT_OVR 19
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -351,12 +351,14 @@ parse_general_features(struct drm_i915_p
dev_priv->lvds_ssc_freq =
intel_bios_ssc_frequency(dev, general->ssc_freq);
dev_priv->display_clock_mode = general->display_clock_mode;
- DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d\n",
+ dev_priv->fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
+ DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
dev_priv->int_tv_support,
dev_priv->int_crt_support,
dev_priv->lvds_use_ssc,
dev_priv->lvds_ssc_freq,
- dev_priv->display_clock_mode);
+ dev_priv->display_clock_mode,
+ dev_priv->fdi_rx_polarity_inverted);
}
}
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -127,7 +127,9 @@ struct bdb_general_features {
/* bits 3 */
u8 disable_smooth_vision:1;
u8 single_dvi:1;
- u8 rsvd9:6; /* finish byte */
+ u8 rsvd9:1;
+ u8 fdi_rx_polarity_inverted:1;
+ u8 rsvd10:4; /* finish byte */
/* bits 4 */
u8 legacy_monitor_detect;
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3562,6 +3562,7 @@ static void cpt_init_clock_gating(struct
{
struct drm_i915_private *dev_priv = dev->dev_private;
int pipe;
+ uint32_t val;
/*
* On Ibex Peak and Cougar Point, we need to disable clock
@@ -3574,8 +3575,12 @@ static void cpt_init_clock_gating(struct
/* The below fixes the weird display corruption, a few pixels shifted
* downward, on (only) LVDS of some HP laptops with IVY.
*/
- for_each_pipe(pipe)
- I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_CHICKEN2_TIMING_OVERRIDE);
+ for_each_pipe(pipe) {
+ val = TRANS_CHICKEN2_TIMING_OVERRIDE;
+ if (dev_priv->fdi_rx_polarity_inverted)
+ val |= TRANS_CHICKEN2_FDI_POLARITY_REVERSED;
+ I915_WRITE(TRANS_CHICKEN2(pipe), val);
+ }
/* WADP0ClockGatingDisable */
for_each_pipe(pipe) {
I915_WRITE(TRANS_CHICKEN1(pipe),
Patches currently in stable-queue which might be from paulo.r.zanoni@xxxxxxxxx are
queue-3.9/drm-i915-set-cpt-fdi-rx-polarity-bits-based-on-vbt.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html