commit e60b22c5b7e59db09a7c9490b1e132c7e49ae904 upstream.
This patch fixes some annoying messages like 'Error reading PHY register' and
'Hardware Erorr' and saves several seconds on reboot.
Cc: Bruce Allan <bruce.w.allan@xxxxxxxxx>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@xxxxxxxxxx>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Tested-by: Borislav Petkov <bp@xxxxxxx>
Tested-by: Aaron Brown <aaron.f.brown@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
Tested-by: Tóth Attila <atoth@xxxxxxxxxxxxx>
---
drivers/net/ethernet/intel/e1000e/ethtool.c | 13 +++++++++++++
drivers/net/ethernet/intel/e1000e/netdev.c | 2 ++
2 files changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index fd4772a..522fb10 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
+#include <linux/pm_runtime.h>
#include "e1000.h"
@@ -2053,7 +2054,19 @@ static int e1000_get_rxnfc(struct net_device *netdev,
}
}
+static int e1000e_ethtool_begin(struct net_device *netdev)
+{
+ return pm_runtime_get_sync(netdev->dev.parent);
+}
+
+static void e1000e_ethtool_complete(struct net_device *netdev)
+{
+ pm_runtime_put_sync(netdev->dev.parent);
+}
+
static const struct ethtool_ops e1000_ethtool_ops = {
+ .begin = e1000e_ethtool_begin,
+ .complete = e1000e_ethtool_complete,
.get_settings = e1000_get_settings,
.set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 4570cad..8692eca 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4313,6 +4313,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
int ret_val;
+ pm_runtime_get_sync(&adapter->pdev->dev);
ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
@@ -4323,6 +4324,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
if (ret_val)
e_warn("Error reading PHY register\n");
+ pm_runtime_put_sync(&adapter->pdev->dev);
} else {
/* Do not read PHY registers if link is not up
* Set values to typical power-on defaults
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html