This is a note to let you know that I've just added the patch titled
mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload
to the 3.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-at91-avr32-atmel-mci-fix-dma-channel-leak-on-module-unload.patch
and it can be found in the queue-3.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@xxxxxxxxx>
Date: Wed, 13 Mar 2013 17:11:59 +0100
Subject: mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload
From: Johan Hovold <jhovold@xxxxxxxxx>
commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream.
Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.
Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Signed-off-by: Chris Ball <cjb@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/configs/at91sam9g45_defconfig | 1 -
arch/avr32/configs/favr-32_defconfig | 1 -
arch/avr32/configs/merisc_defconfig | 1 -
drivers/mmc/host/Kconfig | 10 ----------
drivers/mmc/host/atmel-mci.c | 2 --
5 files changed, 15 deletions(-)
--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -173,7 +173,6 @@ CONFIG_MMC=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_SDIO_UART=m
CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
CONFIG_LEDS_ATMEL_PWM=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGER_TIMER=y
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -122,7 +122,6 @@ CONFIG_USB_G_SERIAL=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_ATMEL_PWM=m
--- a/arch/avr32/configs/merisc_defconfig
+++ b/arch/avr32/configs/merisc_defconfig
@@ -102,7 +102,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_ATMEL_PWM=y
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -292,16 +292,6 @@ config MMC_ATMELMCI
If unsure, say N.
-config MMC_ATMELMCI_DMA
- bool "Atmel MCI DMA support"
- depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
- help
- Say Y here to have the Atmel MCI driver use a DMA engine to
- do data transfers and thus increase the throughput and
- reduce the CPU utilization.
-
- If unsure, say N.
-
config MMC_MSM
tristate "Qualcomm SDCC Controller Support"
depends on MMC && ARCH_MSM
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2487,10 +2487,8 @@ static int __exit atmci_remove(struct pl
atmci_readl(host, ATMCI_SR);
clk_disable(host->mck);
-#ifdef CONFIG_MMC_ATMELMCI_DMA
if (host->dma.chan)
dma_release_channel(host->dma.chan);
-#endif
free_irq(platform_get_irq(pdev, 0), host);
iounmap(host->regs);
Patches currently in stable-queue which might be from jhovold@xxxxxxxxx are
queue-3.8/mmc-at91-avr32-atmel-mci-fix-dma-channel-leak-on-module-unload.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html