3.2.43-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Joseph CHANG <josright123@xxxxxxxxx>
[ Upstream commit 6741f40d198c6a5feb23653a1efd4ca47f93d83d ]
Fix bug for DM9000 revision B which contain a DSP PHY
DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY,
So need extra change in initialization, For
explicity PHY Reset and PHY init parameter, and
first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe().
Following DM9000_NCR reset cause by dm9000_open() clear the
NCR_MAC_LBK bit.
Without this fix, Power-up FIFO pointers error happen around 2%
rate among Davicom's customers' boards. With this fix, All above
cases can be solved.
Signed-off-by: Joseph CHANG <josright123@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/net/ethernet/davicom/dm9000.c | 214 +++++++++++++++++-----------------
drivers/net/ethernet/davicom/dm9000.h | 11 +-
2 files changed, 120 insertions(+), 105 deletions(-)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 2a22f52..2f2e98b 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -257,6 +257,107 @@ static void dm9000_dumpblk_32bit(void __iomem *reg, int count)
tmp = readl(reg);
}
+/*
+ * Sleep, either by using msleep() or if we are suspending, then
+ * use mdelay() to sleep.
+ */
+static void dm9000_msleep(board_info_t *db, unsigned int ms)
+{
+ if (db->in_suspend)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+/* Read a word from phyxcer */
+static int
+dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned int reg_save;
+ int ret;
+
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Issue phyxcer read command */
+ iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait read complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
+
+ /* The read data keeps on REG_0D & REG_0E */
+ ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ mutex_unlock(&db->addr_lock);
+
+ dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
+ return ret;
+}
+
+/* Write a word to phyxcer */
+static void
+dm9000_phy_write(struct net_device *dev,
+ int phyaddr_unused, int reg, int value)
+{
+ board_info_t *db = netdev_priv(dev);
+ unsigned long flags;
+ unsigned long reg_save;
+
+ dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
+ mutex_lock(&db->addr_lock);
+
+ spin_lock_irqsave(&db->lock, flags);
+
+ /* Save previous register address */
+ reg_save = readb(db->io_addr);
+
+ /* Fill the phyxcer register into REG_0C */
+ iow(db, DM9000_EPAR, DM9000_PHY | reg);
+
+ /* Fill the written data into REG_0D & REG_0E */
+ iow(db, DM9000_EPDRL, value);
+ iow(db, DM9000_EPDRH, value >> 8);
+
+ /* Issue phyxcer write command */
+ iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW);
+
+ writeb(reg_save, db->io_addr);
+ spin_unlock_irqrestore(&db->lock, flags);
+
+ dm9000_msleep(db, 1); /* Wait write complete */
+
+ spin_lock_irqsave(&db->lock, flags);
+ reg_save = readb(db->io_addr);
+
+ iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+
+ /* restore the previous address */
+ writeb(reg_save, db->io_addr);
+
+ spin_unlock_irqrestore(&db->lock, flags);
+ mutex_unlock(&db->addr_lock);
+}
+
/* dm9000_set_io
*
* select the specified set of io routines to use with the
@@ -793,6 +894,9 @@ dm9000_init_dm9000(struct net_device *dev)
iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */
+ dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */
+ dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); /* Init */
+
ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
/* if wol is needed, then always set NCR_WAKEEN otherwise we end
@@ -1199,109 +1303,6 @@ dm9000_open(struct net_device *dev)
return 0;
}
-/*
- * Sleep, either by using msleep() or if we are suspending, then
- * use mdelay() to sleep.
- */
-static void dm9000_msleep(board_info_t *db, unsigned int ms)
-{
- if (db->in_suspend)
- mdelay(ms);
- else
- msleep(ms);
-}
-
-/*
- * Read a word from phyxcer
- */
-static int
-dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned int reg_save;
- int ret;
-
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); /* Issue phyxcer read command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- dm9000_msleep(db, 1); /* Wait read complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */
-
- /* The read data keeps on REG_0D & REG_0E */
- ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock,flags);
-
- mutex_unlock(&db->addr_lock);
-
- dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
- return ret;
-}
-
-/*
- * Write a word to phyxcer
- */
-static void
-dm9000_phy_write(struct net_device *dev,
- int phyaddr_unused, int reg, int value)
-{
- board_info_t *db = netdev_priv(dev);
- unsigned long flags;
- unsigned long reg_save;
-
- dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
- mutex_lock(&db->addr_lock);
-
- spin_lock_irqsave(&db->lock,flags);
-
- /* Save previous register address */
- reg_save = readb(db->io_addr);
-
- /* Fill the phyxcer register into REG_0C */
- iow(db, DM9000_EPAR, DM9000_PHY | reg);
-
- /* Fill the written data into REG_0D & REG_0E */
- iow(db, DM9000_EPDRL, value);
- iow(db, DM9000_EPDRH, value >> 8);
-
- iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); /* Issue phyxcer write command */
-
- writeb(reg_save, db->io_addr);
- spin_unlock_irqrestore(&db->lock, flags);
-
- dm9000_msleep(db, 1); /* Wait write complete */
-
- spin_lock_irqsave(&db->lock,flags);
- reg_save = readb(db->io_addr);
-
- iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */
-
- /* restore the previous address */
- writeb(reg_save, db->io_addr);
-
- spin_unlock_irqrestore(&db->lock, flags);
- mutex_unlock(&db->addr_lock);
-}
-
static void
dm9000_shutdown(struct net_device *dev)
{
@@ -1502,7 +1503,12 @@ dm9000_probe(struct platform_device *pdev)
db->flags |= DM9000_PLATF_SIMPLE_PHY;
#endif
- dm9000_reset(db);
+ /* Fixing bug on dm9000_probe, takeover dm9000_reset(db),
+ * Need 'NCR_MAC_LBK' bit to indeed stable our DM9000 fifo
+ * while probe stage.
+ */
+
+ iow(db, DM9000_NCR, NCR_MAC_LBK | NCR_RST);
/* try multiple times, DM9000 sometimes gets the read wrong */
for (i = 0; i < 8; i++) {
diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h
index 55688bd..9ce058a 100644
--- a/drivers/net/ethernet/davicom/dm9000.h
+++ b/drivers/net/ethernet/davicom/dm9000.h
@@ -69,7 +69,9 @@
#define NCR_WAKEEN (1<<6)
#define NCR_FCOL (1<<4)
#define NCR_FDX (1<<3)
-#define NCR_LBK (3<<1)
+
+#define NCR_RESERVED (3<<1)
+#define NCR_MAC_LBK (1<<1)
#define NCR_RST (1<<0)
#define NSR_SPEED (1<<7)
@@ -167,5 +169,12 @@
#define ISR_LNKCHNG (1<<5)
#define ISR_UNDERRUN (1<<4)
+/* Davicom MII registers.
+ */
+
+#define MII_DM_DSPCR 0x1b /* DSP Control Register */
+
+#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */
+
#endif /* _DM9000X_H_ */
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html