This is a note to let you know that I've just added the patch titled
can: sja1000: fix define conflict on SH
to the 3.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
can-sja1000-fix-define-conflict-on-sh.patch
and it can be found in the queue-3.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From f901b6bc404b67d96eca739857c097e022727b71 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Date: Wed, 27 Mar 2013 11:36:42 +0100
Subject: can: sja1000: fix define conflict on SH
From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
commit f901b6bc404b67d96eca739857c097e022727b71 upstream.
Thias patch fixes a define conflict between the SH architecture and the sja1000
driver:
drivers/net/can/sja1000/sja1000.h:59:0: warning:
"REG_SR" redefined [enabled by default]
arch/sh/include/asm/ptrace_32.h:25:0: note:
this is the location of the previous definition
A SJA1000_ prefix is added to the offending sja1000 define only, to make a
minimal patch suited for stable. A later patch will add a SJA1000_ prefix to
all defines in sja1000.h.
Reported-by: Fengguang Wu <fengguang.wu@xxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/can/sja1000/plx_pci.c | 4 ++--
drivers/net/can/sja1000/sja1000.c | 6 +++---
drivers/net/can/sja1000/sja1000.h | 2 +-
3 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -329,7 +329,7 @@ static inline int plx_pci_check_sja1000(
*/
if ((priv->read_reg(priv, REG_CR) & REG_CR_BASICCAN_INITIAL_MASK) ==
REG_CR_BASICCAN_INITIAL &&
- (priv->read_reg(priv, REG_SR) == REG_SR_BASICCAN_INITIAL) &&
+ (priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_BASICCAN_INITIAL) &&
(priv->read_reg(priv, REG_IR) == REG_IR_BASICCAN_INITIAL))
flag = 1;
@@ -341,7 +341,7 @@ static inline int plx_pci_check_sja1000(
* See states on p. 23 of the Datasheet.
*/
if (priv->read_reg(priv, REG_MOD) == REG_MOD_PELICAN_INITIAL &&
- priv->read_reg(priv, REG_SR) == REG_SR_PELICAN_INITIAL &&
+ priv->read_reg(priv, SJA1000_REG_SR) == REG_SR_PELICAN_INITIAL &&
priv->read_reg(priv, REG_IR) == REG_IR_PELICAN_INITIAL)
return flag;
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -91,7 +91,7 @@ static void sja1000_write_cmdreg(struct
*/
spin_lock_irqsave(&priv->cmdreg_lock, flags);
priv->write_reg(priv, REG_CMR, val);
- priv->read_reg(priv, REG_SR);
+ priv->read_reg(priv, SJA1000_REG_SR);
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
@@ -496,7 +496,7 @@ irqreturn_t sja1000_interrupt(int irq, v
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
@@ -515,7 +515,7 @@ irqreturn_t sja1000_interrupt(int irq, v
/* receive interrupt */
while (status & SR_RBS) {
sja1000_rx(dev);
- status = priv->read_reg(priv, REG_SR);
+ status = priv->read_reg(priv, SJA1000_REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -56,7 +56,7 @@
/* SJA1000 registers - manual section 6.4 (Pelican Mode) */
#define REG_MOD 0x00
#define REG_CMR 0x01
-#define REG_SR 0x02
+#define SJA1000_REG_SR 0x02
#define REG_IR 0x03
#define REG_IER 0x04
#define REG_ALC 0x0B
Patches currently in stable-queue which might be from mkl@xxxxxxxxxxxxxx are
queue-3.4/can-sja1000-fix-define-conflict-on-sh.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html