[ 28/72] sfc: Detach net device when stopping queues for reconfiguration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.4-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>

[ Upstream commit 29c69a4882641285a854d6d03ca5adbba68c0034 ]

We must only ever stop TX queues when they are full or the net device
is not 'ready' so far as the net core, and specifically the watchdog,
is concerned.  Otherwise, the watchdog may fire *immediately* if no
packets have been added to the queue in the last 5 seconds.

The device is ready if all the following are true:

(a) It has a qdisc
(b) It is marked present
(c) It is running
(d) The link is reported up

(a) and (c) are normally true, and must not be changed by a driver.
(d) is under our control, but fake link changes may disturb userland.
This leaves (b).  We already mark the device absent during reset
and self-test, but we need to do the same during MTU changes and ring
reallocation.  We don't need to do this when the device is brought
down because then (c) is already false.

Signed-off-by: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/sfc/efx.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -754,6 +754,7 @@ efx_realloc_channels(struct efx_nic *efx
 						tx_queue->txd.entries);
 	}
 
+	efx_device_detach_sync(efx);
 	efx_stop_all(efx);
 	efx_stop_interrupts(efx, true);
 
@@ -807,6 +808,7 @@ out:
 
 	efx_start_interrupts(efx, true);
 	efx_start_all(efx);
+	netif_device_attach(efx->net_dev);
 	return rc;
 
 rollback:
@@ -1601,8 +1603,12 @@ static void efx_stop_all(struct efx_nic
 	/* Flush efx_mac_work(), refill_workqueue, monitor_work */
 	efx_flush_all(efx);
 
-	/* Stop the kernel transmit interface late, so the watchdog
-	 * timer isn't ticking over the flush */
+	/* Stop the kernel transmit interface.  This is only valid if
+	 * the device is stopped or detached; otherwise the watchdog
+	 * may fire immediately.
+	 */
+	WARN_ON(netif_running(efx->net_dev) &&
+		netif_device_present(efx->net_dev));
 	netif_tx_disable(efx->net_dev);
 
 	efx_stop_datapath(efx);
@@ -1921,10 +1927,11 @@ static int efx_change_mtu(struct net_dev
 	if (new_mtu > EFX_MAX_MTU)
 		return -EINVAL;
 
-	efx_stop_all(efx);
-
 	netif_dbg(efx, drv, efx->net_dev, "changing MTU to %d\n", new_mtu);
 
+	efx_device_detach_sync(efx);
+	efx_stop_all(efx);
+
 	mutex_lock(&efx->mac_lock);
 	/* Reconfigure the MAC before enabling the dma queues so that
 	 * the RX buffers don't overflow */
@@ -1933,6 +1940,7 @@ static int efx_change_mtu(struct net_dev
 	mutex_unlock(&efx->mac_lock);
 
 	efx_start_all(efx);
+	netif_device_attach(efx->net_dev);
 	return 0;
 }
 


--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]