commit: ce7d363aaf1e28be8406a2976220944ca487e8ca
From: NeilBrown <neilb@xxxxxxx>
Date: Mon, 4 Mar 2013 12:37:14 +1100
Subject: md/raid5: schedule_construction should abort if nothing to do.
Since commit 1ed850f356a0a422013846b5291acff08815008b
md/raid5: make sure to_read and to_write never go negative.
It has been possible for handle_stripe_dirtying to be called
when there isn't actually any work to do.
It then calls schedule_reconstruction() which will set R5_LOCKED
on the parity block(s) even when nothing else is happening.
This then causes problems in do_release_stripe().
So add checks to schedule_reconstruction() so that if it doesn't
find anything to do, it just aborts.
This bug was introduced in v3.7, so the patch is suitable
for -stable kernels since then.
Cc: stable@xxxxxxxxxxxxxxx (v3.7+)
Reported-by: majianpeng <majianpeng@xxxxxxxxx>
Signed-off-by: NeilBrown <neilb@xxxxxxx>
---
drivers/md/raid5.c | 38 ++++++++++++++++++++++----------------
1 file changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 35031c8..5601dda 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2283,17 +2283,6 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
int level = conf->level;
if (rcw) {
- /* if we are not expanding this is a proper write request, and
- * there will be bios with new data to be drained into the
- * stripe cache
- */
- if (!expand) {
- sh->reconstruct_state = reconstruct_state_drain_run;
- set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- } else
- sh->reconstruct_state = reconstruct_state_run;
-
- set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
@@ -2306,6 +2295,21 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
s->locked++;
}
}
+ /* if we are not expanding this is a proper write request, and
+ * there will be bios with new data to be drained into the
+ * stripe cache
+ */
+ if (!expand) {
+ if (!s->locked)
+ /* False alarm, nothing to do */
+ return;
+ sh->reconstruct_state = reconstruct_state_drain_run;
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ } else
+ sh->reconstruct_state = reconstruct_state_run;
+
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
+
if (s->locked + conf->max_degraded == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
atomic_inc(&conf->pending_full_writes);
@@ -2314,11 +2318,6 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
- sh->reconstruct_state = reconstruct_state_prexor_drain_run;
- set_bit(STRIPE_OP_PREXOR, &s->ops_request);
- set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
-
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
if (i == pd_idx)
@@ -2333,6 +2332,13 @@ schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
s->locked++;
}
}
+ if (!s->locked)
+ /* False alarm - nothing to do */
+ return;
+ sh->reconstruct_state = reconstruct_state_prexor_drain_run;
+ set_bit(STRIPE_OP_PREXOR, &s->ops_request);
+ set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
}
/* keep the parity disk(s) locked while asynchronous operations
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html