Re: Linux 3.8.4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 1e1145c..8f01cb1 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -11,6 +11,9 @@ Required properties:
 	- "nvidia,tegra20-uart"
 	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
+	- "altr,16550-FIFO32"
+	- "altr,16550-FIFO64"
+	- "altr,16550-FIFO128"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
diff --git a/Makefile b/Makefile
index 8c49fc9b..e20f162 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 8
-SUBLEVEL = 3
+SUBLEVEL = 4
 EXTRAVERSION =
 NAME = Unicycling Gorilla
 
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 191d37c..1478294 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = {
 	/* If you choose to use a pin other than PB16 it needs to be 3.3V */
 	.pin		= AT91_PIN_PB16,
 	.is_open_drain  = 1,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 48a962b..58a6758 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = {
 static struct w1_gpio_platform_data w1_gpio_pdata = {
 	.pin		= AT91_PIN_PA29,
 	.is_open_drain	= 1,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device w1_device = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index a685e97..45b7c71 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -743,6 +743,9 @@ EXPORT_SYMBOL(edma_free_channel);
  */
 int edma_alloc_slot(unsigned ctlr, int slot)
 {
+	if (!edma_cc[ctlr])
+		return -EINVAL;
+
 	if (slot >= 0)
 		slot = EDMA_CHAN_SLOT(slot);
 
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 2798f43..1dddc1b 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = {
 
 static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
 	.pin			= 14,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 static struct platform_device vulcan_w1_gpio = {
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index de4fd2b..e714ead 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
 
 	struct device_node *np = of_find_compatible_node(
 		NULL, NULL, "marvell,kirkwood-gating-clock");
-
 	struct of_phandle_args clkspec;
+	struct clk *clk;
 
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_GE0;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.0",
-			 of_clk_get_from_provider(&clkspec));
-
 	clkspec.args[0] = CGC_BIT_PEX0;
 	orion_clkdev_add("0", "pcie",
 			 of_clk_get_from_provider(&clkspec));
@@ -63,14 +59,24 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add("1", "pcie",
 			 of_clk_get_from_provider(&clkspec));
 
-	clkspec.args[0] = CGC_BIT_GE1;
-	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
-			 of_clk_get_from_provider(&clkspec));
-
 	clkspec.args[0] = CGC_BIT_SDIO;
 	orion_clkdev_add(NULL, "mvsdio",
 			 of_clk_get_from_provider(&clkspec));
 
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by
+	 * u-boot if the clocks are turned off. Until proper DT support
+	 * is available we always enable them for now.
+	 */
+	clkspec.args[0] = CGC_BIT_GE0;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+	clk_prepare_enable(clk);
+
+	clkspec.args[0] = CGC_BIT_GE1;
+	clk = of_clk_get_from_provider(&clkspec);
+	orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+	clk_prepare_enable(clk);
 }
 
 static void __init kirkwood_of_clk_init(void)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 25b08bfa..6283fcb 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
 	.pin			= GPIO_ONE_WIRE,
 	.is_open_drain		= 0,
 	.enable_external_pullup	= w1_enable_external_pullup,
+	.ext_pullup_enable_pin	= -EINVAL,
 };
 
 struct platform_device raumfeld_w1_gpio_device = {
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2fdb47a..b59e06f 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -343,17 +343,16 @@ extern void slb_set_size(u16 size);
 /*
  * VSID allocation (256MB segment)
  *
- * We first generate a 38-bit "proto-VSID".  For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- *	(context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
  *
- * This splits the proto-VSID into the below range
- *  0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- *  2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
  *
  * The proto-VSIDs are then scrambled into real VSIDs with the
  * multiplicative hash:
@@ -363,41 +362,49 @@ extern void slb_set_size(u16 size);
  * VSID_MULTIPLIER is prime, so in particular it is
  * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
  * Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
- *
- * This scheme has several advantages over older methods:
- *
- *	- We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
  *
- *	- We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS  bits of context for user addresses.
- *  i.e. 64T (46 bits) of address space for up to half a million contexts.
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
  *
- *	- The scramble function gives robust scattering in the hash
- * table (at least based on some initial results).  The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
  */
 
+#define CONTEXT_BITS		19
+#define ESID_BITS		18
+#define ESID_BITS_1T		6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT	((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
 /*
  * This should be computed such that protovosid * vsid_mulitplier
  * doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
  */
 #define VSID_MULTIPLIER_256M	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_256M		38
+#define VSID_BITS_256M		(CONTEXT_BITS + ESID_BITS)
 #define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
 
 #define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
-#define VSID_BITS_1T		26
+#define VSID_BITS_1T		(CONTEXT_BITS + ESID_BITS_1T)
 #define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
 
-#define CONTEXT_BITS		19
-#define USER_ESID_BITS		18
-#define USER_ESID_BITS_1T	6
 
-#define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE	(1UL << (ESID_BITS + SID_SHIFT))
 
 /*
  * This macro generates asm code to compute the VSID scramble
@@ -421,7 +428,8 @@ extern void slb_set_size(u16 size);
 	srdi	rx,rt,VSID_BITS_##size;					\
 	clrldi	rt,rt,(64-VSID_BITS_##size);				\
 	add	rt,rt,rx;		/* add high and low bits */	\
-	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
+	/* NOTE: explanation based on VSID_BITS_##size = 36		\
+	 * Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
 	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
 	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
 	 * the bit clear, r3 already has the answer we want, if it	\
@@ -513,34 +521,6 @@ typedef struct {
 	})
 #endif /* 1 */
 
-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User:   0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
-	unsigned long proto_vsid;
-	/*
-	 * We need to make sure proto_vsid for the kernel is
-	 * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
-	 */
-	if (ssize == MMU_SEGSIZE_256M) {
-		proto_vsid = ea >> SID_SHIFT;
-		proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
-		return vsid_scramble(proto_vsid, 256M);
-	}
-	proto_vsid = ea >> SID_SHIFT_1T;
-	proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
-	return vsid_scramble(proto_vsid, 1T);
-}
-
 /* Returns the segment size indicator for a user address */
 static inline int user_segment_size(unsigned long addr)
 {
@@ -550,17 +530,41 @@ static inline int user_segment_size(unsigned long addr)
 	return MMU_SEGSIZE_256M;
 }
 
-/* This is only valid for user addresses (which are below 2^44) */
 static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
 				     int ssize)
 {
+	/*
+	 * Bad address. We return VSID 0 for that
+	 */
+	if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+		return 0;
+
 	if (ssize == MMU_SEGSIZE_256M)
-		return vsid_scramble((context << USER_ESID_BITS)
+		return vsid_scramble((context << ESID_BITS)
 				     | (ea >> SID_SHIFT), 256M);
-	return vsid_scramble((context << USER_ESID_BITS_1T)
+	return vsid_scramble((context << ESID_BITS_1T)
 			     | (ea >> SID_SHIFT_1T), 1T);
 }
 
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+	unsigned long context;
+
+	/*
+	 * kernel take the top 4 context from the available range
+	 */
+	context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+	return get_vsid(context, ea, ssize);
+}
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 75a3d71..19599ef 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -275,7 +275,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_features		= CPU_FTRS_PPC970,
 		.cpu_user_features	= COMMON_USER_POWER4 |
 			PPC_FEATURE_HAS_ALTIVEC_COMP,
-		.mmu_features		= MMU_FTR_HPTE_TABLE,
+		.mmu_features		= MMU_FTRS_PPC970,
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.num_pmcs		= 8,
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4665e82..3684cbd 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1268,20 +1268,36 @@ do_ste_alloc:
 _GLOBAL(do_stab_bolted)
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r11,PACA_EXSLB+EX_SRR0(r13)	/* save SRR0 in exc. frame */
+	mfspr	r11,SPRN_DAR			/* ea */
 
+	/*
+	 * check for bad kernel/user address
+	 * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+	 */
+	rldicr. r9,r11,4,(63 - 46 - 4)
+	li	r9,0	/* VSID = 0 for bad address */
+	bne-	0f
+
+	/*
+	 * Calculate VSID:
+	 * This is the kernel vsid, we take the top for context from
+	 * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * Here we know that (ea >> 60) == 0xc
+	 */
+	lis	r9,(MAX_USER_CONTEXT + 1)@ha
+	addi	r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+	srdi	r10,r11,SID_SHIFT
+	rldimi  r10,r9,ESID_BITS,0 /* proto vsid */
+	ASM_VSID_SCRAMBLE(r10, r9, 256M)
+	rldic	r9,r10,12,16	/* r9 = vsid << 12 */
+
+0:
 	/* Hash to the primary group */
 	ld	r10,PACASTABVIRT(r13)
-	mfspr	r11,SPRN_DAR
-	srdi	r11,r11,28
+	srdi	r11,r11,SID_SHIFT
 	rldimi	r10,r11,7,52	/* r10 = first ste of the group */
 
-	/* Calculate VSID */
-	/* This is a kernel address, so protovsid = ESID | 1 << 37 */
-	li	r9,0x1
-	rldimi  r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
-	ASM_VSID_SCRAMBLE(r11, r9, 256M)
-	rldic	r9,r11,12,16	/* r9 = vsid << 12 */
-
 	/* Search the primary group for a free entry */
 1:	ld	r11,0(r10)	/* Test valid bit of the current ste	*/
 	andi.	r11,r11,0x80
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index ead58e3..5d7d29a 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -326,8 +326,8 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 	vcpu3s->context_id[0] = err;
 
 	vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
-				  << USER_ESID_BITS) - 1;
-	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+				  << ESID_BITS) - 1;
+	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
 	vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
 
 	kvmppc_mmu_hpte_init(vcpu);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 3a292be..004630b 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -194,6 +194,11 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		unsigned long vpn  = hpt_vpn(vaddr, vsid, ssize);
 		unsigned long tprot = prot;
 
+		/*
+		 * If we hit a bad address return error.
+		 */
+		if (!vsid)
+			return -1;
 		/* Make kernel text executable */
 		if (overlaps_kernel_text(vaddr, vaddr + step))
 			tprot &= ~HPTE_R_N;
@@ -758,6 +763,8 @@ void __init early_init_mmu(void)
 	/* Initialize stab / SLB management */
 	if (mmu_has_feature(MMU_FTR_SLB))
 		slb_initialize();
+	else
+		stab_initialize(get_paca()->stab_real);
 }
 
 #ifdef CONFIG_SMP
@@ -921,11 +928,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
 		ea, access, trap);
 
-	if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
-		DBG_LOW(" out of pgtable range !\n");
- 		return 1;
-	}
-
 	/* Get region & vsid */
  	switch (REGION_ID(ea)) {
 	case USER_REGION_ID:
@@ -956,6 +958,11 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	}
 	DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
 
+	/* Bad address. */
+	if (!vsid) {
+		DBG_LOW("Bad address!\n");
+		return 1;
+	}
 	/* Get pgdir */
 	pgdir = mm->pgd;
 	if (pgdir == NULL)
@@ -1125,6 +1132,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	/* Get VSID */
 	ssize = user_segment_size(ea);
 	vsid = get_vsid(mm->context.id, ea, ssize);
+	if (!vsid)
+		return;
 
 	/* Hash doesn't like irqs */
 	local_irq_save(flags);
@@ -1217,6 +1226,9 @@ static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi)
 	hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
 	hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
+	/* Don't create HPTE entries for bad address */
+	if (!vsid)
+		return;
 	ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
 				 mode, HPTE_V_BOLTED,
 				 mmu_linear_psize, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 40bc5b0..d1d1b92 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -29,15 +29,6 @@
 static DEFINE_SPINLOCK(mmu_context_lock);
 static DEFINE_IDA(mmu_context_ida);
 
-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT	((1UL << CONTEXT_BITS) - 1)
-
 int __init_new_context(void)
 {
 	int index;
@@ -56,7 +47,7 @@ again:
 	else if (err)
 		return err;
 
-	if (index > MAX_CONTEXT) {
+	if (index > MAX_USER_CONTEXT) {
 		spin_lock(&mmu_context_lock);
 		ida_remove(&mmu_context_ida, index);
 		spin_unlock(&mmu_context_lock);
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index e212a27..654258f 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -61,7 +61,7 @@
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
 #error TASK_SIZE_USER64 exceeds user VSID range
 #endif
 #endif
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 1a16ca2..17aa6df 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -31,10 +31,15 @@
  * No other registers are examined or changed.
  */
 _GLOBAL(slb_allocate_realmode)
-	/* r3 = faulting address */
+	/*
+	 * check for bad kernel/user address
+	 * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+	 */
+	rldicr. r9,r3,4,(63 - 46 - 4)
+	bne-	8f
 
 	srdi	r9,r3,60		/* get region */
-	srdi	r10,r3,28		/* get esid */
+	srdi	r10,r3,SID_SHIFT	/* get esid */
 	cmpldi	cr7,r9,0xc		/* cmp PAGE_OFFSET for later use */
 
 	/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
@@ -56,12 +61,14 @@ _GLOBAL(slb_allocate_realmode)
 	 */
 _GLOBAL(slb_miss_kernel_load_linear)
 	li	r11,0
-	li	r9,0x1
 	/*
-	 * for 1T we shift 12 bits more.  slb_finish_load_1T will do
-	 * the necessary adjustment
+	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * r9 = region id.
 	 */
-	rldimi  r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+	addis	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+	addi	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
 BEGIN_FTR_SECTION
 	b	slb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
@@ -91,24 +98,19 @@ _GLOBAL(slb_miss_kernel_load_vmemmap)
 	_GLOBAL(slb_miss_kernel_load_io)
 	li	r11,0
 6:
-	li	r9,0x1
 	/*
-	 * for 1T we shift 12 bits more.  slb_finish_load_1T will do
-	 * the necessary adjustment
+	 * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+	 * r9 = region id.
 	 */
-	rldimi  r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+	addis	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+	addi	r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
 BEGIN_FTR_SECTION
 	b	slb_finish_load
 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load_1T
 
-0:	/* user address: proto-VSID = context << 15 | ESID. First check
-	 * if the address is within the boundaries of the user region
-	 */
-	srdi.	r9,r10,USER_ESID_BITS
-	bne-	8f			/* invalid ea bits set */
-
-
+0:
 	/* when using slices, we extract the psize off the slice bitmaps
 	 * and then we need to get the sllp encoding off the mmu_psize_defs
 	 * array.
@@ -164,15 +166,13 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
 	ld	r9,PACACONTEXTID(r13)
 BEGIN_FTR_SECTION
 	cmpldi	r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	rldimi	r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
 	bge	slb_finish_load_1T
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	b	slb_finish_load
 
 8:	/* invalid EA */
 	li	r10,0			/* BAD_VSID */
+	li	r9,0			/* BAD_VSID */
 	li	r11,SLB_VSID_USER	/* flags don't much matter */
 	b	slb_finish_load
 
@@ -221,8 +221,6 @@ _GLOBAL(slb_allocate_user)
 
 	/* get context to calculate proto-VSID */
 	ld	r9,PACACONTEXTID(r13)
-	rldimi	r10,r9,USER_ESID_BITS,0
-
 	/* fall through slb_finish_load */
 
 #endif /* __DISABLED__ */
@@ -231,9 +229,10 @@ _GLOBAL(slb_allocate_user)
 /*
  * Finish loading of an SLB entry and return
  *
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
  */
 slb_finish_load:
+	rldimi  r10,r9,ESID_BITS,0
 	ASM_VSID_SCRAMBLE(r10,r9,256M)
 	/*
 	 * bits above VSID_BITS_256M need to be ignored from r10
@@ -298,10 +297,11 @@ _GLOBAL(slb_compare_rr_to_size)
 /*
  * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
  *
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
  */
 slb_finish_load_1T:
-	srdi	r10,r10,40-28		/* get 1T ESID */
+	srdi	r10,r10,(SID_SHIFT_1T - SID_SHIFT)	/* get 1T ESID */
+	rldimi  r10,r9,ESID_BITS_1T,0
 	ASM_VSID_SCRAMBLE(r10,r9,1T)
 	/*
 	 * bits above VSID_BITS_1T need to be ignored from r10
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 0d82ef5..023ec8a 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -82,11 +82,11 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	if (!is_kernel_addr(addr)) {
 		ssize = user_segment_size(addr);
 		vsid = get_vsid(mm->context.id, addr, ssize);
-		WARN_ON(vsid == 0);
 	} else {
 		vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
 		ssize = mmu_kernel_ssize;
 	}
+	WARN_ON(vsid == 0);
 	vpn = hpt_vpn(addr, vsid, ssize);
 	rpte = __real_pte(__pte(pte), ptep);
 
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 1d8fe2b..6b32af3 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -74,8 +74,6 @@ static inline void __tlb_flush_idte(unsigned long asce)
 
 static inline void __tlb_flush_mm(struct mm_struct * mm)
 {
-	if (unlikely(cpumask_empty(mm_cpumask(mm))))
-		return;
 	/*
 	 * If the machine has IDTE we prefer to do a per mm flush
 	 * on all cpus instead of doing a local flush if the mm
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 5502285..94feff7 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -636,7 +636,8 @@ ENTRY(mcck_int_handler)
 	UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
 mcck_skip:
 	SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
-	mvc	__PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+	stm	%r0,%r7,__PT_R0(%r11)
+	mvc	__PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
 	stm	%r8,%r9,__PT_PSW(%r11)
 	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
 	l	%r1,BASED(.Ldo_machine_check)
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 6d34e0c..082b845 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -678,8 +678,9 @@ ENTRY(mcck_int_handler)
 	UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
 	LAST_BREAK %r14
 mcck_skip:
-	lghi	%r14,__LC_GPREGS_SAVE_AREA
-	mvc	__PT_R0(128,%r11),0(%r14)
+	lghi	%r14,__LC_GPREGS_SAVE_AREA+64
+	stmg	%r0,%r7,__PT_R0(%r11)
+	mvc	__PT_R8(64,%r11),0(%r14)
 	stmg	%r8,%r9,__PT_PSW(%r11)
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
 	lgr	%r2,%r11		# pass pointer to pt_regs
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 826054a..b05a575 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -729,3 +729,13 @@ void intel_ds_init(void)
 		}
 	}
 }
+
+void perf_restore_debug_store(void)
+{
+	struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
+
+	if (!x86_pmu.bts && !x86_pmu.pebs)
+		return;
+
+	wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds);
+}
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 120cee1..3c68768 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -11,6 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/export.h>
 #include <linux/smp.h>
+#include <linux/perf_event.h>
 
 #include <asm/pgtable.h>
 #include <asm/proto.h>
@@ -228,6 +229,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	do_fpu_end();
 	x86_platform.restore_sched_clock_state();
 	mtrr_bp_restore();
+	perf_restore_debug_store();
 }
 
 /* Needed by apm.c */
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index ae12512..8bc6d39 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1285,11 +1285,9 @@ static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev)
 	/* the width of sector_t may be narrow for bit-shift */
 	sz = sec;
 	sz <<= 9;
-	mutex_lock(&bdev->bd_mutex);
 	bd_set_size(bdev, sz);
 	/* let user-space know about the new size */
 	kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE);
-	mutex_unlock(&bdev->bd_mutex);
 
  out:
 	return err;
@@ -1858,11 +1856,15 @@ static int __init loop_init(void)
 		max_part = (1UL << part_shift) - 1;
 	}
 
-	if ((1UL << part_shift) > DISK_MAX_PARTS)
-		return -EINVAL;
+	if ((1UL << part_shift) > DISK_MAX_PARTS) {
+		err = -EINVAL;
+		goto misc_out;
+	}
 
-	if (max_loop > 1UL << (MINORBITS - part_shift))
-		return -EINVAL;
+	if (max_loop > 1UL << (MINORBITS - part_shift)) {
+		err = -EINVAL;
+		goto misc_out;
+	}
 
 	/*
 	 * If max_loop is specified, create that many devices upfront.
@@ -1880,8 +1882,10 @@ static int __init loop_init(void)
 		range = 1UL << MINORBITS;
 	}
 
-	if (register_blkdev(LOOP_MAJOR, "loop"))
-		return -EIO;
+	if (register_blkdev(LOOP_MAJOR, "loop")) {
+		err = -EIO;
+		goto misc_out;
+	}
 
 	blk_register_region(MKDEV(LOOP_MAJOR, 0), range,
 				  THIS_MODULE, loop_probe, NULL, NULL);
@@ -1894,6 +1898,10 @@ static int __init loop_init(void)
 
 	printk(KERN_INFO "loop: module loaded\n");
 	return 0;
+
+misc_out:
+	misc_deregister(&loop_misc);
+	return err;
 }
 
 static int loop_exit_cb(int id, void *ptr, void *data)
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index b65c103..1acc4e0 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -92,14 +92,22 @@ static int probe_common(struct virtio_device *vdev)
 {
 	int err;
 
+	if (vq) {
+		/* We only support one device for now */
+		return -EBUSY;
+	}
 	/* We expect a single virtqueue. */
 	vq = virtio_find_single_vq(vdev, random_recv_done, "input");
-	if (IS_ERR(vq))
-		return PTR_ERR(vq);
+	if (IS_ERR(vq)) {
+		err = PTR_ERR(vq);
+		vq = NULL;
+		return err;
+	}
 
 	err = hwrng_register(&virtio_hwrng);
 	if (err) {
 		vdev->config->del_vqs(vdev);
+		vq = NULL;
 		return err;
 	}
 
@@ -112,6 +120,7 @@ static void remove_common(struct virtio_device *vdev)
 	busy = false;
 	hwrng_unregister(&virtio_hwrng);
 	vdev->config->del_vqs(vdev);
+	vq = NULL;
 }
 
 static int virtrng_probe(struct virtio_device *vdev)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 5206f24..99daa89 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1297,21 +1297,19 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		goto cleanup_vga_switcheroo;
 
-	ret = drm_irq_install(dev);
-	if (ret)
-		goto cleanup_gem_stolen;
-
-	/* Important: The output setup functions called by modeset_init need
-	 * working irqs for e.g. gmbus and dp aux transfers. */
 	intel_modeset_init(dev);
 
 	ret = i915_gem_init(dev);
 	if (ret)
-		goto cleanup_irq;
+		goto cleanup_gem_stolen;
+
+	intel_modeset_gem_init(dev);
 
 	INIT_WORK(&dev_priv->console_resume_work, intel_console_resume);
 
-	intel_modeset_gem_init(dev);
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto cleanup_gem;
 
 	/* Always safe in the mode setting case. */
 	/* FIXME: do pre/post-mode set stuff in core KMS code */
@@ -1319,10 +1317,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	ret = intel_fbdev_init(dev);
 	if (ret)
-		goto cleanup_gem;
-
-	/* Only enable hotplug handling once the fbdev is fully set up. */
-	dev_priv->enable_hotplug_processing = true;
+		goto cleanup_irq;
 
 	drm_kms_helper_poll_init(dev);
 
@@ -1331,13 +1326,13 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	return 0;
 
+cleanup_irq:
+	drm_irq_uninstall(dev);
 cleanup_gem:
 	mutex_lock(&dev->struct_mutex);
 	i915_gem_cleanup_ringbuffer(dev);
 	mutex_unlock(&dev->struct_mutex);
 	i915_gem_cleanup_aliasing_ppgtt(dev);
-cleanup_irq:
-	drm_irq_uninstall(dev);
 cleanup_gem_stolen:
 	i915_gem_cleanup_stolen(dev);
 cleanup_vga_switcheroo:
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index fb6454c..79f5fc5 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -486,7 +486,6 @@ static int i915_drm_freeze(struct drm_device *dev)
 		intel_modeset_disable(dev);
 
 		drm_irq_uninstall(dev);
-		dev_priv->enable_hotplug_processing = false;
 	}
 
 	i915_save_state(dev);
@@ -563,19 +562,9 @@ static int __i915_drm_thaw(struct drm_device *dev)
 		error = i915_gem_init_hw(dev);
 		mutex_unlock(&dev->struct_mutex);
 
-		/* We need working interrupts for modeset enabling ... */
-		drm_irq_install(dev);
-
 		intel_modeset_init_hw(dev);
 		intel_modeset_setup_hw_state(dev, false);
-
-		/*
-		 * ... but also need to make sure that hotplug processing
-		 * doesn't cause havoc. Like in the driver load code we don't
-		 * bother with the tiny race here where we might loose hotplug
-		 * notifications.
-		 * */
-		dev_priv->enable_hotplug_processing = true;
+		drm_irq_install(dev);
 	}
 
 	intel_opregion_init(dev);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 66ad64f..7339a4b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -672,7 +672,6 @@ typedef struct drm_i915_private {
 
 	u32 hotplug_supported_mask;
 	struct work_struct hotplug_work;
-	bool enable_hotplug_processing;
 
 	int num_pipe;
 	int num_pch_pll;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 3c00403..fe84338 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -287,10 +287,6 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *encoder;
 
-	/* HPD irq before everything is fully set up. */
-	if (!dev_priv->enable_hotplug_processing)
-		return;
-
 	mutex_lock(&mode_config->mutex);
 	DRM_DEBUG_KMS("running encoder hotplug functions\n");
 
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index 41df29f..ebbb9f4 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -422,6 +422,7 @@ static struct attribute *pem_input_attributes[] = {
 	&sensor_dev_attr_in2_input.dev_attr.attr,
 	&sensor_dev_attr_curr1_input.dev_attr.attr,
 	&sensor_dev_attr_power1_input.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group pem_input_group = {
@@ -432,6 +433,7 @@ static struct attribute *pem_fan_attributes[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group pem_fan_group = {
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index a58de38..6d61307 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -59,7 +59,7 @@ enum chips { ltc2978, ltc3880 };
 struct ltc2978_data {
 	enum chips id;
 	int vin_min, vin_max;
-	int temp_min, temp_max;
+	int temp_min, temp_max[2];
 	int vout_min[8], vout_max[8];
 	int iout_max[2];
 	int temp2_max;
@@ -113,9 +113,10 @@ static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
 		ret = pmbus_read_word_data(client, page,
 					   LTC2978_MFR_TEMPERATURE_PEAK);
 		if (ret >= 0) {
-			if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
-				data->temp_max = ret;
-			ret = data->temp_max;
+			if (lin11_to_val(ret)
+			    > lin11_to_val(data->temp_max[page]))
+				data->temp_max[page] = ret;
+			ret = data->temp_max[page];
 		}
 		break;
 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
@@ -266,7 +267,7 @@ static int ltc2978_write_word_data(struct i2c_client *client, int page,
 		break;
 	case PMBUS_VIRT_RESET_TEMP_HISTORY:
 		data->temp_min = 0x7bff;
-		data->temp_max = 0x7c00;
+		data->temp_max[page] = 0x7c00;
 		ret = ltc2978_clear_peaks(client, page, data->id);
 		break;
 	default:
@@ -323,7 +324,8 @@ static int ltc2978_probe(struct i2c_client *client,
 	data->vin_min = 0x7bff;
 	data->vin_max = 0x7c00;
 	data->temp_min = 0x7bff;
-	data->temp_max = 0x7c00;
+	for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+		data->temp_max[i] = 0x7c00;
 	data->temp2_max = 0x7c00;
 
 	switch (data->id) {
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 3766682..db04f53 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1527,6 +1527,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 					oobreadlen -= toread;
 				}
 			}
+
+			if (chip->options & NAND_NEED_READRDY) {
+				/* Apply delay or wait for ready/busy pin */
+				if (!chip->dev_ready)
+					udelay(chip->chip_delay);
+				else
+					nand_wait_ready(mtd);
+			}
 		} else {
 			memcpy(buf, chip->buffers->databuf + col, bytes);
 			buf += bytes;
@@ -1791,6 +1799,14 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
 		len = min(len, readlen);
 		buf = nand_transfer_oob(chip, buf, ops, len);
 
+		if (chip->options & NAND_NEED_READRDY) {
+			/* Apply delay or wait for ready/busy pin */
+			if (!chip->dev_ready)
+				udelay(chip->chip_delay);
+			else
+				nand_wait_ready(mtd);
+		}
+
 		readlen -= len;
 		if (!readlen)
 			break;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index e3aa274..9c61238 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,49 +22,51 @@
 *	512	512 Byte page size
 */
 struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
 
 #ifdef CONFIG_MTD_NAND_MUSEUM_IDS
-	{"NAND 1MiB 5V 8-bit",		0x6e, 256, 1, 0x1000, 0},
-	{"NAND 2MiB 5V 8-bit",		0x64, 256, 2, 0x1000, 0},
-	{"NAND 4MiB 5V 8-bit",		0x6b, 512, 4, 0x2000, 0},
-	{"NAND 1MiB 3,3V 8-bit",	0xe8, 256, 1, 0x1000, 0},
-	{"NAND 1MiB 3,3V 8-bit",	0xec, 256, 1, 0x1000, 0},
-	{"NAND 2MiB 3,3V 8-bit",	0xea, 256, 2, 0x1000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xd5, 512, 4, 0x2000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xe3, 512, 4, 0x2000, 0},
-	{"NAND 4MiB 3,3V 8-bit",	0xe5, 512, 4, 0x2000, 0},
-	{"NAND 8MiB 3,3V 8-bit",	0xd6, 512, 8, 0x2000, 0},
-
-	{"NAND 8MiB 1,8V 8-bit",	0x39, 512, 8, 0x2000, 0},
-	{"NAND 8MiB 3,3V 8-bit",	0xe6, 512, 8, 0x2000, 0},
-	{"NAND 8MiB 1,8V 16-bit",	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-	{"NAND 8MiB 3,3V 16-bit",	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	{"NAND 1MiB 5V 8-bit",		0x6e, 256, 1, 0x1000, SP_OPTIONS},
+	{"NAND 2MiB 5V 8-bit",		0x64, 256, 2, 0x1000, SP_OPTIONS},
+	{"NAND 4MiB 5V 8-bit",		0x6b, 512, 4, 0x2000, SP_OPTIONS},
+	{"NAND 1MiB 3,3V 8-bit",	0xe8, 256, 1, 0x1000, SP_OPTIONS},
+	{"NAND 1MiB 3,3V 8-bit",	0xec, 256, 1, 0x1000, SP_OPTIONS},
+	{"NAND 2MiB 3,3V 8-bit",	0xea, 256, 2, 0x1000, SP_OPTIONS},
+	{"NAND 4MiB 3,3V 8-bit",	0xd5, 512, 4, 0x2000, SP_OPTIONS},
+	{"NAND 4MiB 3,3V 8-bit",	0xe3, 512, 4, 0x2000, SP_OPTIONS},
+	{"NAND 4MiB 3,3V 8-bit",	0xe5, 512, 4, 0x2000, SP_OPTIONS},
+	{"NAND 8MiB 3,3V 8-bit",	0xd6, 512, 8, 0x2000, SP_OPTIONS},
+
+	{"NAND 8MiB 1,8V 8-bit",	0x39, 512, 8, 0x2000, SP_OPTIONS},
+	{"NAND 8MiB 3,3V 8-bit",	0xe6, 512, 8, 0x2000, SP_OPTIONS},
+	{"NAND 8MiB 1,8V 16-bit",	0x49, 512, 8, 0x2000, SP_OPTIONS16},
+	{"NAND 8MiB 3,3V 16-bit",	0x59, 512, 8, 0x2000, SP_OPTIONS16},
 #endif
 
-	{"NAND 16MiB 1,8V 8-bit",	0x33, 512, 16, 0x4000, 0},
-	{"NAND 16MiB 3,3V 8-bit",	0x73, 512, 16, 0x4000, 0},
-	{"NAND 16MiB 1,8V 16-bit",	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 16MiB 3,3V 16-bit",	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 32MiB 1,8V 8-bit",	0x35, 512, 32, 0x4000, 0},
-	{"NAND 32MiB 3,3V 8-bit",	0x75, 512, 32, 0x4000, 0},
-	{"NAND 32MiB 1,8V 16-bit",	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 32MiB 3,3V 16-bit",	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 64MiB 1,8V 8-bit",	0x36, 512, 64, 0x4000, 0},
-	{"NAND 64MiB 3,3V 8-bit",	0x76, 512, 64, 0x4000, 0},
-	{"NAND 64MiB 1,8V 16-bit",	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 64MiB 3,3V 16-bit",	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 128MiB 1,8V 8-bit",	0x78, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 1,8V 8-bit",	0x39, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 3,3V 8-bit",	0x79, 512, 128, 0x4000, 0},
-	{"NAND 128MiB 1,8V 16-bit",	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 1,8V 16-bit",	0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 3,3V 16-bit",	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	{"NAND 128MiB 3,3V 16-bit",	0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
-	{"NAND 256MiB 3,3V 8-bit",	0x71, 512, 256, 0x4000, 0},
+	{"NAND 16MiB 1,8V 8-bit",	0x33, 512, 16, 0x4000, SP_OPTIONS},
+	{"NAND 16MiB 3,3V 8-bit",	0x73, 512, 16, 0x4000, SP_OPTIONS},
+	{"NAND 16MiB 1,8V 16-bit",	0x43, 512, 16, 0x4000, SP_OPTIONS16},
+	{"NAND 16MiB 3,3V 16-bit",	0x53, 512, 16, 0x4000, SP_OPTIONS16},
+
+	{"NAND 32MiB 1,8V 8-bit",	0x35, 512, 32, 0x4000, SP_OPTIONS},
+	{"NAND 32MiB 3,3V 8-bit",	0x75, 512, 32, 0x4000, SP_OPTIONS},
+	{"NAND 32MiB 1,8V 16-bit",	0x45, 512, 32, 0x4000, SP_OPTIONS16},
+	{"NAND 32MiB 3,3V 16-bit",	0x55, 512, 32, 0x4000, SP_OPTIONS16},
+
+	{"NAND 64MiB 1,8V 8-bit",	0x36, 512, 64, 0x4000, SP_OPTIONS},
+	{"NAND 64MiB 3,3V 8-bit",	0x76, 512, 64, 0x4000, SP_OPTIONS},
+	{"NAND 64MiB 1,8V 16-bit",	0x46, 512, 64, 0x4000, SP_OPTIONS16},
+	{"NAND 64MiB 3,3V 16-bit",	0x56, 512, 64, 0x4000, SP_OPTIONS16},
+
+	{"NAND 128MiB 1,8V 8-bit",	0x78, 512, 128, 0x4000, SP_OPTIONS},
+	{"NAND 128MiB 1,8V 8-bit",	0x39, 512, 128, 0x4000, SP_OPTIONS},
+	{"NAND 128MiB 3,3V 8-bit",	0x79, 512, 128, 0x4000, SP_OPTIONS},
+	{"NAND 128MiB 1,8V 16-bit",	0x72, 512, 128, 0x4000, SP_OPTIONS16},
+	{"NAND 128MiB 1,8V 16-bit",	0x49, 512, 128, 0x4000, SP_OPTIONS16},
+	{"NAND 128MiB 3,3V 16-bit",	0x74, 512, 128, 0x4000, SP_OPTIONS16},
+	{"NAND 128MiB 3,3V 16-bit",	0x59, 512, 128, 0x4000, SP_OPTIONS16},
+
+	{"NAND 256MiB 3,3V 8-bit",	0x71, 512, 256, 0x4000, SP_OPTIONS},
 
 	/*
 	 * These are the new chips with large page size. The pagesize and the
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b7d45f3..a079da17 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1943,7 +1943,6 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	}
 
 	block_netpoll_tx();
-	call_netdevice_notifiers(NETDEV_RELEASE, bond_dev);
 	write_lock_bh(&bond->lock);
 
 	slave = bond_get_slave_by_dev(bond, slave_dev);
@@ -2047,8 +2046,10 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
 	write_unlock_bh(&bond->lock);
 	unblock_netpoll_tx();
 
-	if (bond->slave_cnt == 0)
+	if (bond->slave_cnt == 0) {
 		call_netdevice_notifiers(NETDEV_CHANGEADDR, bond->dev);
+		call_netdevice_notifiers(NETDEV_RELEASE, bond->dev);
+	}
 
 	bond_compute_features(bond);
 	if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 0035c01..bfcb8bc 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2075,7 +2075,7 @@ static int atl1c_tx_map(struct atl1c_adapter *adapter,
 		if (unlikely(pci_dma_mapping_error(adapter->pdev,
 						   buffer_info->dma)))
 			goto err_dma;
-
+		ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
 		ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE,
 			ATL1C_PCIMAP_TODEVICE);
 		mapped_len += map_len;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 88291bb..bf3f4bc 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1434,12 +1434,11 @@ int mlx4_en_alloc_resources(struct mlx4_en_priv *priv)
 	}
 
 #ifdef CONFIG_RFS_ACCEL
-	priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
-	if (!priv->dev->rx_cpu_rmap)
-		goto err;
-
-	INIT_LIST_HEAD(&priv->filters);
-	spin_lock_init(&priv->filters_lock);
+	if (priv->mdev->dev->caps.comp_pool) {
+		priv->dev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->mdev->dev->caps.comp_pool);
+		if (!priv->dev->rx_cpu_rmap)
+			goto err;
+	}
 #endif
 
 	return 0;
@@ -1634,6 +1633,11 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	if (err)
 		goto out;
 
+#ifdef CONFIG_RFS_ACCEL
+	INIT_LIST_HEAD(&priv->filters);
+	spin_lock_init(&priv->filters_lock);
+#endif
+
 	/* Allocate page for receive rings */
 	err = mlx4_alloc_hwq_res(mdev->dev, &priv->res,
 				MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE);
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index d3fb97d..e5cb723 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -628,6 +628,7 @@ void macvlan_common_setup(struct net_device *dev)
 	ether_setup(dev);
 
 	dev->priv_flags	       &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
+	dev->priv_flags	       |= IFF_UNICAST_FLT;
 	dev->netdev_ops		= &macvlan_netdev_ops;
 	dev->destructor		= free_netdev;
 	dev->header_ops		= &macvlan_hard_header_ops,
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index ad86660..8efe47a 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1139,6 +1139,8 @@ static int team_port_del(struct team *team, struct net_device *port_dev)
 	netdev_set_master(port_dev, NULL);
 	team_port_disable_netpoll(port);
 	vlan_vids_del_by_dev(port_dev, dev);
+	dev_uc_unsync(port_dev, dev);
+	dev_mc_unsync(port_dev, dev);
 	dev_close(port_dev);
 	team_port_leave(team, port);
 	team_port_set_orig_dev_addr(port);
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 2917a86..cb95fe5 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -748,6 +748,8 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev)
 		goto drop;
 	skb_orphan(skb);
 
+	nf_reset(skb);
+
 	/* Enqueue packet */
 	skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb);
 
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 656230e..6993bfa 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1491,6 +1491,15 @@ static __net_init int vxlan_init_net(struct net *net)
 static __net_exit void vxlan_exit_net(struct net *net)
 {
 	struct vxlan_net *vn = net_generic(net, vxlan_net_id);
+	struct vxlan_dev *vxlan;
+	struct hlist_node *pos;
+	unsigned h;
+
+	rtnl_lock();
+	for (h = 0; h < VNI_HASH_SIZE; ++h)
+		hlist_for_each_entry(vxlan, pos, &vn->vni_list[h], hlist)
+			dev_close(vxlan->dev);
+	rtnl_unlock();
 
 	if (vn->sock) {
 		sk_release_kernel(vn->sock->sk);
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 1767998..3e7f961 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -948,12 +948,13 @@ static int dt9812_di_rinsn(struct comedi_device *dev,
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 	u8 bits = 0;
 
 	dt9812_digital_in(devpriv->slot, &bits);
 	for (n = 0; n < insn->n; n++)
-		data[n] = ((1 << insn->chanspec) & bits) != 0;
+		data[n] = ((1 << channel) & bits) != 0;
 	return n;
 }
 
@@ -962,12 +963,13 @@ static int dt9812_do_winsn(struct comedi_device *dev,
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 	u8 bits = 0;
 
 	dt9812_digital_out_shadow(devpriv->slot, &bits);
 	for (n = 0; n < insn->n; n++) {
-		u8 mask = 1 << insn->chanspec;
+		u8 mask = 1 << channel;
 
 		bits &= ~mask;
 		if (data[n])
@@ -982,13 +984,13 @@ static int dt9812_ai_rinsn(struct comedi_device *dev,
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 
 	for (n = 0; n < insn->n; n++) {
 		u16 value = 0;
 
-		dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
-				 DT9812_GAIN_1);
+		dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1);
 		data[n] = value;
 	}
 	return n;
@@ -999,12 +1001,13 @@ static int dt9812_ao_rinsn(struct comedi_device *dev,
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 	u16 value;
 
 	for (n = 0; n < insn->n; n++) {
 		value = 0;
-		dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
+		dt9812_analog_out_shadow(devpriv->slot, channel, &value);
 		data[n] = value;
 	}
 	return n;
@@ -1015,10 +1018,11 @@ static int dt9812_ao_winsn(struct comedi_device *dev,
 			   unsigned int *data)
 {
 	struct comedi_dt9812 *devpriv = dev->private;
+	unsigned int channel = CR_CHAN(insn->chanspec);
 	int n;
 
 	for (n = 0; n < insn->n; n++)
-		dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
+		dt9812_analog_out(devpriv->slot, channel, data[n]);
 	return n;
 }
 
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index f33086d..f726970 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -644,8 +644,6 @@ static int vt6656_suspend(struct usb_interface *intf, pm_message_t message)
 	if (device->flags & DEVICE_FLAGS_OPENED)
 		device_close(device->dev);
 
-	usb_put_dev(interface_to_usbdev(intf));
-
 	return 0;
 }
 
@@ -656,8 +654,6 @@ static int vt6656_resume(struct usb_interface *intf)
 	if (!device || !device->dev)
 		return -ENODEV;
 
-	usb_get_dev(interface_to_usbdev(intf));
-
 	if (!(device->flags & DEVICE_FLAGS_OPENED))
 		device_open(device->dev);
 
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 79ff3a5..ac35c90 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -47,7 +47,6 @@ static void pty_close(struct tty_struct *tty, struct file *filp)
 	/* Review - krefs on tty_link ?? */
 	if (!tty->link)
 		return;
-	tty->link->packet = 0;
 	set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
 	wake_up_interruptible(&tty->link->read_wait);
 	wake_up_interruptible(&tty->link->write_wait);
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index f932043..733f22c 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -308,7 +308,28 @@ static const struct serial8250_config uart_config[] = {
 	},
 	[PORT_8250_CIR] = {
 		.name		= "CIR port"
-	}
+	},
+	[PORT_ALTR_16550_F32] = {
+		.name		= "Altera 16550 FIFO32",
+		.fifo_size	= 32,
+		.tx_loadsz	= 32,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
+	[PORT_ALTR_16550_F64] = {
+		.name		= "Altera 16550 FIFO64",
+		.fifo_size	= 64,
+		.tx_loadsz	= 64,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
+	[PORT_ALTR_16550_F128] = {
+		.name		= "Altera 16550 FIFO128",
+		.fifo_size	= 128,
+		.tx_loadsz	= 128,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
+	},
 };
 
 /* Uart divisor latch read */
@@ -3430,3 +3451,32 @@ module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
 MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
 #endif
 MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
+ * working as well for the module options so we don't break people.  We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables.  So we stick them inside a dummy function to avoid
+ * those conflicts.  The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky.  I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250."
+
+	module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
+	module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
+	module_param_cb(skip_txen_test, &param_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+	__module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+		&param_array_ops, .arr = &__param_arr_probe_rsa,
+		0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250");
+#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index a27a98e..5cdb092 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1321,6 +1321,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
 
 /*
  * Master list of serial port init/setup/exit quirks.
@@ -1592,15 +1593,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_PLX,
-		.device		= PCI_DEVICE_ID_PLX_9050,
-		.subvendor	= PCI_VENDOR_ID_PLX,
-		.subdevice	= PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
-		.init		= pci_plx9050_init,
-		.setup		= pci_default_setup,
-		.exit		= pci_plx9050_exit,
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_PLX,
 		.device		= PCI_DEVICE_ID_PLX_ROMULUS,
 		.subvendor	= PCI_VENDOR_ID_PLX,
 		.subdevice	= PCI_DEVICE_ID_PLX_ROMULUS,
@@ -3456,7 +3448,12 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
 		PCI_VENDOR_ID_PLX,
 		PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
-		pbn_b0_4_115200 },
+		pbn_b2_4_115200 },
+	/* Unknown card - subdevice 0x1588 */
+	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_PLX,
+		PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+		pbn_b2_8_115200 },
 	{	PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
 		PCI_SUBVENDOR_ID_KEYSPAN,
 		PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
@@ -4449,6 +4446,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+		0x1000, 0x0012,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
 		0xA000, 0x1000,
 		0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 35d9ab9..b3455a9 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,6 +429,7 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct uart_8250_port uart;
 	int ret, line, flags = dev_id->driver_data;
+	struct resource *res = NULL;
 
 	if (flags & UNKNOWN_DEV) {
 		ret = serial_pnp_guess_board(dev);
@@ -439,11 +440,12 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
-	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
-		uart.port.iobase = pnp_port_start(dev, 2);
-		uart.port.iotype = UPIO_PORT;
-	} else if (pnp_port_valid(dev, 0)) {
-		uart.port.iobase = pnp_port_start(dev, 0);
+	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+		res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+	else if (pnp_port_valid(dev, 0))
+		res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+	if (pnp_resource_enabled(res)) {
+		uart.port.iobase = res->start;
 		uart.port.iotype = UPIO_PORT;
 	} else if (pnp_mem_valid(dev, 0)) {
 		uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 59c23d0..02e706e 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -209,14 +209,14 @@ config SERIAL_SAMSUNG
 config SERIAL_SAMSUNG_UARTS_4
 	bool
 	depends on PLAT_SAMSUNG
-	default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+	default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
 	help
 	  Internal node for the common case of 4 Samsung compatible UARTs
 
 config SERIAL_SAMSUNG_UARTS
 	int
 	depends on PLAT_SAMSUNG
-	default 6 if ARCH_S5P6450
+	default 6 if CPU_S5P6450
 	default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
 	default 3
 	help
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index e7cae1c..3490629 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -240,6 +240,12 @@ static struct of_device_id of_platform_serial_table[] = {
 	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
 	{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
 	{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+	{ .compatible = "altr,16550-FIFO32",
+		.data = (void *)PORT_ALTR_16550_F32, },
+	{ .compatible = "altr,16550-FIFO64",
+		.data = (void *)PORT_ALTR_16550_F64, },
+	{ .compatible = "altr,16550-FIFO128",
+		.data = (void *)PORT_ALTR_16550_F128, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
 	{ .compatible = "ibm,qpace-nwp-serial",
 		.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 45d9161..cd1f861 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -473,7 +473,7 @@ static void flush_to_ldisc(struct work_struct *work)
 	struct tty_ldisc *disc;
 
 	tty = port->itty;
-	if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+	if (tty == NULL)
 		return;
 
 	disc = tty_ldisc_ref(tty);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 5f0cb41..122d056 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -56,6 +56,7 @@ MODULE_DEVICE_TABLE (usb, wdm_ids);
 #define WDM_RESPONDING		7
 #define WDM_SUSPENDING		8
 #define WDM_RESETTING		9
+#define WDM_OVERFLOW		10
 
 #define WDM_MAX			16
 
@@ -155,6 +156,7 @@ static void wdm_in_callback(struct urb *urb)
 {
 	struct wdm_device *desc = urb->context;
 	int status = urb->status;
+	int length = urb->actual_length;
 
 	spin_lock(&desc->iuspin);
 	clear_bit(WDM_RESPONDING, &desc->flags);
@@ -185,9 +187,17 @@ static void wdm_in_callback(struct urb *urb)
 	}
 
 	desc->rerr = status;
-	desc->reslength = urb->actual_length;
-	memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
-	desc->length += desc->reslength;
+	if (length + desc->length > desc->wMaxCommand) {
+		/* The buffer would overflow */
+		set_bit(WDM_OVERFLOW, &desc->flags);
+	} else {
+		/* we may already be in overflow */
+		if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+			memmove(desc->ubuf + desc->length, desc->inbuf, length);
+			desc->length += length;
+			desc->reslength = length;
+		}
+	}
 skip_error:
 	wake_up(&desc->wait);
 
@@ -435,6 +445,11 @@ retry:
 			rv = -ENODEV;
 			goto err;
 		}
+		if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+			clear_bit(WDM_OVERFLOW, &desc->flags);
+			rv = -ENOBUFS;
+			goto err;
+		}
 		i++;
 		if (file->f_flags & O_NONBLOCK) {
 			if (!test_bit(WDM_READ, &desc->flags)) {
@@ -478,6 +493,7 @@ retry:
 			spin_unlock_irq(&desc->iuspin);
 			goto retry;
 		}
+
 		if (!desc->reslength) { /* zero length read */
 			dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
 			clear_bit(WDM_READ, &desc->flags);
@@ -1004,6 +1020,7 @@ static int wdm_post_reset(struct usb_interface *intf)
 	struct wdm_device *desc = wdm_find_device(intf);
 	int rv;
 
+	clear_bit(WDM_OVERFLOW, &desc->flags);
 	clear_bit(WDM_RESETTING, &desc->flags);
 	rv = recover_from_urb_loss(desc);
 	mutex_unlock(&desc->wlock);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 3a4004a..f00c749 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -575,6 +575,7 @@ static int dwc3_remove(struct platform_device *pdev)
 		break;
 	}
 
+	dwc3_free_event_buffers(dwc);
 	dwc3_core_exit(dwc);
 
 	return 0;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index fd252f0..eda2cf4 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -135,7 +135,7 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		 * qtd is updated in qh_completions(). Update the QH
 		 * overlay here.
 		 */
-		if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+		if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
 			qh->hw->hw_qtd_next = qtd->hw_next;
 			qtd = NULL;
 		}
@@ -449,11 +449,19 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			else if (last_status == -EINPROGRESS && !urb->unlinked)
 				continue;
 
-			/* qh unlinked; token in overlay may be most current */
-			if (state == QH_STATE_IDLE
-					&& cpu_to_hc32(ehci, qtd->qtd_dma)
-						== hw->hw_current) {
+			/*
+			 * If this was the active qtd when the qh was unlinked
+			 * and the overlay's token is active, then the overlay
+			 * hasn't been written back to the qtd yet so use its
+			 * token instead of the qtd's.  After the qtd is
+			 * processed and removed, the overlay won't be valid
+			 * any more.
+			 */
+			if (state == QH_STATE_IDLE &&
+					qh->qtd_list.next == &qtd->qtd_list &&
+					(hw->hw_token & ACTIVE_BIT(ehci))) {
 				token = hc32_to_cpu(ehci, hw->hw_token);
+				hw->hw_token &= ~ACTIVE_BIT(ehci);
 
 				/* An unlink may leave an incomplete
 				 * async transaction in the TT buffer.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index edc0f0d..4747d1c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -85,6 +85,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+	{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
 	{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
 	{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
@@ -150,6 +151,25 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+	{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+	{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+	{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+	{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+	{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+	{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+	{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+	{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+	{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f7d339d..558adfc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,6 +341,8 @@ static void option_instat_callback(struct urb *urb);
 #define CINTERION_PRODUCT_EU3_E			0x0051
 #define CINTERION_PRODUCT_EU3_P			0x0052
 #define CINTERION_PRODUCT_PH8			0x0053
+#define CINTERION_PRODUCT_AH6			0x0055
+#define CINTERION_PRODUCT_PLS8			0x0060
 
 /* Olivetti products */
 #define OLIVETTI_VENDOR_ID			0x0b3c
@@ -579,6 +581,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
@@ -1260,6 +1263,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 9b1b96f..31f81c3 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -69,6 +69,7 @@ static struct usb_device_id id_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) },  /* NMEA */
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) },  /* WMC */
 	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) },  /* DIAG */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 2466254..59b32b7 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -197,12 +197,15 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 
 	if (is_gobi1k) {
 		/* Gobi 1K USB layout:
-		 * 0: serial port (doesn't respond)
+		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 1: serial port (doesn't respond)
 		 * 2: AT-capable modem port
 		 * 3: QMI/net
 		 */
-		if (ifnum == 2)
+		if (ifnum == 0) {
+			dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+			altsetting = 1;
+		} else if (ifnum == 2)
 			dev_dbg(dev, "Modem port found\n");
 		else
 			altsetting = -1;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 7ab9046..105d900 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
 	return 0;
 }
 
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
 {
 	int result;
 
@@ -104,75 +104,3 @@ static int usb_stor_huawei_feature_init(struct us_data *us)
 	US_DEBUGP("Huawei mode set result is %d\n", result);
 	return 0;
 }
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is  unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
-	int result = 0;
-	int act_len = 0;
-	struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
-	char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
-			0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-	bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
-	bcbw->Tag = 0;
-	bcbw->DataTransferLength = 0;
-	bcbw->Flags = bcbw->Lun = 0;
-	bcbw->Length = sizeof(rewind_cmd);
-	memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
-	memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
-	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
-					US_BULK_CB_WRAP_LEN, &act_len);
-	US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
-	return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
-	struct usb_interface_descriptor *idesc;
-	int idProduct;
-
-	idesc = &us->pusb_intf->cur_altsetting->desc;
-	idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
-	/* The first port is CDROM,
-	 * means the dongle in the single port mode,
-	 * and a switch command is required to be sent. */
-	if (idesc && idesc->bInterfaceNumber == 0) {
-		if ((idProduct == 0x1001)
-			|| (idProduct == 0x1003)
-			|| (idProduct == 0x1004)
-			|| (idProduct >= 0x1401 && idProduct <= 0x1500)
-			|| (idProduct >= 0x1505 && idProduct <= 0x1600)
-			|| (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
-			return 1;
-		}
-	}
-	return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
-	int result = 0;
-
-	if (usb_stor_huawei_dongles_pid(us)) {
-		if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
-			result = usb_stor_huawei_scsi_init(us);
-		else
-			result = usb_stor_huawei_feature_init(us);
-	}
-	return result;
-}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 5376d4f..529327f 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@ int usb_stor_euscsi_init(struct us_data *us);
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
 
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 72923b5..d305a5a 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1527,10 +1527,335 @@ UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
 /* Reported by fangxiaozhi <huananhu@xxxxxxxxxx>
  * This brings the HUAWEI data card devices into multi-port mode
  */
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV(  0x12d1, 0x1001, 0x0000, 0x0000,
 		"HUAWEI MOBILE",
 		"Mass Storage",
-		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1003, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1004, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1401, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1402, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1403, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1404, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1405, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1406, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1407, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1408, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1409, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x140F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1410, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1411, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1412, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1413, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1414, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1415, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1416, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1417, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1418, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1419, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x141F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1420, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1421, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1422, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1423, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1424, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1425, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1426, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1427, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1428, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1429, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x142F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1430, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1431, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1432, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1433, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1434, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1435, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1436, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1437, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1438, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x1439, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143A, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143B, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143C, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143D, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143E, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+		0),
+UNUSUAL_DEV(  0x12d1, 0x143F, 0x0000, 0x0000,
+		"HUAWEI MOBILE",
+		"Mass Storage",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
 		0),
 
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 12cf5f3..025428e 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -422,17 +422,22 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 			= var->bits_per_pixel;
 		break;
 	case 16:
+		/* Older SOCs use IBGR:555 rather than BGR:565. */
+		if (sinfo->have_intensity_bit)
+			var->green.length = 5;
+		else
+			var->green.length = 6;
+
 		if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
-			/* RGB:565 mode */
-			var->red.offset = 11;
+			/* RGB:5X5 mode */
+			var->red.offset = var->green.length + 5;
 			var->blue.offset = 0;
 		} else {
-			/* BGR:565 mode */
+			/* BGR:5X5 mode */
 			var->red.offset = 0;
-			var->blue.offset = 11;
+			var->blue.offset = var->green.length + 5;
 		}
 		var->green.offset = 5;
-		var->green.length = 6;
 		var->red.length = var->blue.length = 5;
 		break;
 	case 32:
@@ -679,8 +684,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
 
 	case FB_VISUAL_PSEUDOCOLOR:
 		if (regno < 256) {
-			if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
-			    || cpu_is_at91sam9rl()) {
+			if (sinfo->have_intensity_bit) {
 				/* old style I+BGR:555 */
 				val  = ((red   >> 11) & 0x001f);
 				val |= ((green >>  6) & 0x03e0);
@@ -870,6 +874,10 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	}
 	sinfo->info = info;
 	sinfo->pdev = pdev;
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+							cpu_is_at91sam9rl()) {
+		sinfo->have_intensity_bit = true;
+	}
 
 	strcpy(info->fix.id, sinfo->pdev->name);
 	info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index d39dfa4..012817a 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -158,7 +158,7 @@ static int w1_gpio_probe(struct platform_device *pdev)
 	return err;
 }
 
-static int __exit w1_gpio_remove(struct platform_device *pdev)
+static int w1_gpio_remove(struct platform_device *pdev)
 {
 	struct w1_bus_master *master = platform_get_drvdata(pdev);
 	struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -210,7 +210,7 @@ static struct platform_driver w1_gpio_driver = {
 		.of_match_table = of_match_ptr(w1_gpio_dt_ids),
 	},
 	.probe = w1_gpio_probe,
-	.remove	= __exit_p(w1_gpio_remove),
+	.remove	= w1_gpio_remove,
 	.suspend = w1_gpio_suspend,
 	.resume = w1_gpio_resume,
 };
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 7994d933..7ce277d 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -924,7 +924,8 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
 			tmp64 = (triplet_ret >> 2);
 			rn |= (tmp64 << i);
 
-			if (kthread_should_stop()) {
+			/* ensure we're called from kthread and not by netlink callback */
+			if (!dev->priv && kthread_should_stop()) {
 				mutex_unlock(&dev->bus_mutex);
 				dev_dbg(&dev->dev, "Abort w1_search\n");
 				return;
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 37c1f82..b98cf0c 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -113,7 +113,8 @@ void xen_pcibk_reset_device(struct pci_dev *dev)
 		if (dev->msi_enabled)
 			pci_disable_msi(dev);
 #endif
-		pci_disable_device(dev);
+		if (pci_is_enabled(dev))
+			pci_disable_device(dev);
 
 		pci_write_config_word(dev, PCI_COMMAND, 0);
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 78333a3..78edf76 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1033,7 +1033,9 @@ void bd_set_size(struct block_device *bdev, loff_t size)
 {
 	unsigned bsize = bdev_logical_block_size(bdev);
 
-	bdev->bd_inode->i_size = size;
+	mutex_lock(&bdev->bd_inode->i_mutex);
+	i_size_write(bdev->bd_inode, size);
+	mutex_unlock(&bdev->bd_inode->i_mutex);
 	while (bsize < PAGE_CACHE_SIZE) {
 		if (size & bsize)
 			break;
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index ac8ff8d..1fd234a 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -681,6 +681,12 @@ int btrfs_close_devices(struct btrfs_fs_devices *fs_devices)
 		__btrfs_close_devices(fs_devices);
 		free_fs_devices(fs_devices);
 	}
+	/*
+	 * Wait for rcu kworkers under __btrfs_close_devices
+	 * to finish all blkdev_puts so device is really
+	 * free when umount is done.
+	 */
+	rcu_barrier();
 	return ret;
 }
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 6e50223..0a7f2d0b 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -353,7 +353,7 @@ static struct block_device *ext3_blkdev_get(dev_t dev, struct super_block *sb)
 	return bdev;
 
 fail:
-	ext3_msg(sb, "error: failed to open journal device %s: %ld",
+	ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
 		__bdevname(dev, b), PTR_ERR(bdev));
 
 	return NULL;
@@ -887,7 +887,7 @@ static ext3_fsblk_t get_sb_block(void **data, struct super_block *sb)
 	/*todo: use simple_strtoll with >32bit ext3 */
 	sb_block = simple_strtoul(options, &options, 0);
 	if (*options && *options != ',') {
-		ext3_msg(sb, "error: invalid sb specification: %s",
+		ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
 		       (char *) *data);
 		return 1;
 	}
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7ccb3c5..ef52d9c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -187,6 +187,13 @@ typedef enum {
  * This happens with the Renesas AG-AND chips, possibly others.
  */
 #define BBT_AUTO_REFRESH	0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY	0x00000100
+
 /* Chip does not allow subpage writes */
 #define NAND_NO_SUBPAGE_WRITE	0x00000200
 
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 6bfb2faa..a280650 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -794,6 +794,12 @@ static inline int __perf_event_disable(void *info)			{ return -1; }
 static inline void perf_event_task_tick(void)				{ }
 #endif
 
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
+extern void perf_restore_debug_store(void);
+#else
+static inline void perf_restore_debug_store(void)			{ }
+#endif
+
 #define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
 
 /*
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 8f6e50a..c019b24 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -51,7 +51,10 @@
 #define PORT_8250_CIR	23	/* CIR infrared port, has its own driver */
 #define PORT_XR17V35X	24	/* Exar XR17V35x UARTs */
 #define PORT_BRCM_TRUMANAGE	25
-#define PORT_MAX_8250	25	/* max port ID */
+#define PORT_ALTR_16550_F32 26	/* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27	/* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250	28	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 28447f1..5f0e234 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -62,6 +62,7 @@ struct atmel_lcdfb_info {
 	void (*atmel_lcdfb_power_control)(int on);
 	struct fb_monspecs	*default_monspecs;
 	u32			pseudo_palette[16];
+	bool			have_intensity_bit;
 };
 
 #define ATMEL_LCDC_DMABADDR1	0x00
diff --git a/kernel/signal.c b/kernel/signal.c
index 3d09cf6..7591ccc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -485,6 +485,9 @@ flush_signal_handlers(struct task_struct *t, int force_default)
 		if (force_default || ka->sa.sa_handler != SIG_IGN)
 			ka->sa.sa_handler = SIG_DFL;
 		ka->sa.sa_flags = 0;
+#ifdef SA_RESTORER
+		ka->sa.sa_restorer = NULL;
+#endif
 		sigemptyset(&ka->sa.sa_mask);
 		ka++;
 	}
diff --git a/net/bridge/br_mdb.c b/net/bridge/br_mdb.c
index acc9f4c..2897e40 100644
--- a/net/bridge/br_mdb.c
+++ b/net/bridge/br_mdb.c
@@ -82,6 +82,7 @@ static int br_mdb_fill_info(struct sk_buff *skb, struct netlink_callback *cb,
 				port = p->port;
 				if (port) {
 					struct br_mdb_entry e;
+					memset(&e, 0, sizeof(e));
 					e.ifindex = port->dev->ifindex;
 					e.state = p->state;
 					if (p->addr.proto == htons(ETH_P_IP))
@@ -138,6 +139,7 @@ static int br_mdb_dump(struct sk_buff *skb, struct netlink_callback *cb)
 				break;
 
 			bpm = nlmsg_data(nlh);
+			memset(bpm, 0, sizeof(*bpm));
 			bpm->ifindex = dev->ifindex;
 			if (br_mdb_fill_info(skb, cb, dev) < 0)
 				goto out;
@@ -173,6 +175,7 @@ static int nlmsg_populate_mdb_fill(struct sk_buff *skb,
 		return -EMSGSIZE;
 
 	bpm = nlmsg_data(nlh);
+	memset(bpm, 0, sizeof(*bpm));
 	bpm->family  = AF_BRIDGE;
 	bpm->ifindex = dev->ifindex;
 	nest = nla_nest_start(skb, MDBA_MDB);
@@ -230,6 +233,7 @@ void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
 {
 	struct br_mdb_entry entry;
 
+	memset(&entry, 0, sizeof(entry));
 	entry.ifindex = port->dev->ifindex;
 	entry.addr.proto = group->proto;
 	entry.addr.u.ip4 = group->u.ip4;
diff --git a/net/core/dev.c b/net/core/dev.c
index f64e439..1339f77 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3419,6 +3419,7 @@ ncls:
 		}
 		switch (rx_handler(&skb)) {
 		case RX_HANDLER_CONSUMED:
+			ret = NET_RX_SUCCESS;
 			goto unlock;
 		case RX_HANDLER_ANOTHER:
 			goto another_round;
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 1868625..798f920 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -976,6 +976,7 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 			 * report anything.
 			 */
 			ivi.spoofchk = -1;
+			memset(ivi.mac, 0, sizeof(ivi.mac));
 			if (dev->netdev_ops->ndo_get_vf_config(dev, i, &ivi))
 				break;
 			vf_mac.vf =
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 1b588e2..21291f1 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -284,6 +284,7 @@ static int dcbnl_getperm_hwaddr(struct net_device *netdev, struct nlmsghdr *nlh,
 	if (!netdev->dcbnl_ops->getpermhwaddr)
 		return -EOPNOTSUPP;
 
+	memset(perm_addr, 0, sizeof(perm_addr));
 	netdev->dcbnl_ops->getpermhwaddr(netdev, perm_addr);
 
 	return nla_put(skb, DCB_ATTR_PERM_HWADDR, sizeof(perm_addr), perm_addr);
@@ -1042,6 +1043,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
 
 	if (ops->ieee_getets) {
 		struct ieee_ets ets;
+		memset(&ets, 0, sizeof(ets));
 		err = ops->ieee_getets(netdev, &ets);
 		if (!err &&
 		    nla_put(skb, DCB_ATTR_IEEE_ETS, sizeof(ets), &ets))
@@ -1050,6 +1052,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
 
 	if (ops->ieee_getmaxrate) {
 		struct ieee_maxrate maxrate;
+		memset(&maxrate, 0, sizeof(maxrate));
 		err = ops->ieee_getmaxrate(netdev, &maxrate);
 		if (!err) {
 			err = nla_put(skb, DCB_ATTR_IEEE_MAXRATE,
@@ -1061,6 +1064,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
 
 	if (ops->ieee_getpfc) {
 		struct ieee_pfc pfc;
+		memset(&pfc, 0, sizeof(pfc));
 		err = ops->ieee_getpfc(netdev, &pfc);
 		if (!err &&
 		    nla_put(skb, DCB_ATTR_IEEE_PFC, sizeof(pfc), &pfc))
@@ -1094,6 +1098,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
 	/* get peer info if available */
 	if (ops->ieee_peer_getets) {
 		struct ieee_ets ets;
+		memset(&ets, 0, sizeof(ets));
 		err = ops->ieee_peer_getets(netdev, &ets);
 		if (!err &&
 		    nla_put(skb, DCB_ATTR_IEEE_PEER_ETS, sizeof(ets), &ets))
@@ -1102,6 +1107,7 @@ static int dcbnl_ieee_fill(struct sk_buff *skb, struct net_device *netdev)
 
 	if (ops->ieee_peer_getpfc) {
 		struct ieee_pfc pfc;
+		memset(&pfc, 0, sizeof(pfc));
 		err = ops->ieee_peer_getpfc(netdev, &pfc);
 		if (!err &&
 		    nla_put(skb, DCB_ATTR_IEEE_PEER_PFC, sizeof(pfc), &pfc))
@@ -1280,6 +1286,7 @@ static int dcbnl_cee_fill(struct sk_buff *skb, struct net_device *netdev)
 	/* peer info if available */
 	if (ops->cee_peer_getpg) {
 		struct cee_pg pg;
+		memset(&pg, 0, sizeof(pg));
 		err = ops->cee_peer_getpg(netdev, &pg);
 		if (!err &&
 		    nla_put(skb, DCB_ATTR_CEE_PEER_PG, sizeof(pg), &pg))
@@ -1288,6 +1295,7 @@ static int dcbnl_cee_fill(struct sk_buff *skb, struct net_device *netdev)
 
 	if (ops->cee_peer_getpfc) {
 		struct cee_pfc pfc;
+		memset(&pfc, 0, sizeof(pfc));
 		err = ops->cee_peer_getpfc(netdev, &pfc);
 		if (!err &&
 		    nla_put(skb, DCB_ATTR_CEE_PEER_PFC, sizeof(pfc), &pfc))
diff --git a/net/ieee802154/6lowpan.h b/net/ieee802154/6lowpan.h
index 8c2251f..bba5f83 100644
--- a/net/ieee802154/6lowpan.h
+++ b/net/ieee802154/6lowpan.h
@@ -84,7 +84,7 @@
 	(memcmp(addr1, addr2, length >> 3) == 0)
 
 /* local link, i.e. FE80::/10 */
-#define is_addr_link_local(a) (((a)->s6_addr16[0]) == 0x80FE)
+#define is_addr_link_local(a) (((a)->s6_addr16[0]) == htons(0xFE80))
 
 /*
  * check whether we can compress the IID to 16 bits,
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index ad70a96..66702d3 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5498,6 +5498,9 @@ int tcp_rcv_established(struct sock *sk, struct sk_buff *skb,
 				if (tcp_checksum_complete_user(sk, skb))
 					goto csum_error;
 
+				if ((int)skb->truesize > sk->sk_forward_alloc)
+					goto step5;
+
 				/* Predicted packet is in window by definition.
 				 * seq == rcv_nxt and rcv_wup <= rcv_nxt.
 				 * Hence, check seq<=rcv_wup reduces to:
@@ -5509,9 +5512,6 @@ int tcp_rcv_established(struct sock *sk, struct sk_buff *skb,
 
 				tcp_rcv_rtt_measure_ts(sk, skb);
 
-				if ((int)skb->truesize > sk->sk_forward_alloc)
-					goto step5;
-
 				NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPHPHITS);
 
 				/* Bulk data transfer: receiver */
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index a52d864..b196852 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -270,7 +270,8 @@ int ip6_mc_input(struct sk_buff *skb)
 	 *      IPv6 multicast router mode is now supported ;)
 	 */
 	if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
-	    !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
+	    !(ipv6_addr_type(&hdr->daddr) &
+	      (IPV6_ADDR_LOOPBACK|IPV6_ADDR_LINKLOCAL)) &&
 	    likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
 		/*
 		 * Okay, we try to forward - split and duplicate
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 6f9f7b6..5845613 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1990,7 +1990,8 @@ void rt6_purge_dflt_routers(struct net *net)
 restart:
 	read_lock_bh(&table->tb6_lock);
 	for (rt = table->tb6_root.leaf; rt; rt = rt->dst.rt6_next) {
-		if (rt->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) {
+		if (rt->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF) &&
+		    (!rt->rt6i_idev || rt->rt6i_idev->cnf.accept_ra != 2)) {
 			dst_hold(&rt->dst);
 			read_unlock_bh(&table->tb6_lock);
 			ip6_del_rt(rt);
diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 716605c..044e9e1 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -355,6 +355,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh
 	l2tp_xmit_skb(session, skb, session->hdr_len);
 
 	sock_put(ps->tunnel_sock);
+	sock_put(sk);
 
 	return error;
 
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index 847d495..8a6c6ea 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -1189,8 +1189,6 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
 	struct netlbl_unlhsh_walk_arg cb_arg;
 	u32 skip_bkt = cb->args[0];
 	u32 skip_chain = cb->args[1];
-	u32 skip_addr4 = cb->args[2];
-	u32 skip_addr6 = cb->args[3];
 	u32 iter_bkt;
 	u32 iter_chain = 0, iter_addr4 = 0, iter_addr6 = 0;
 	struct netlbl_unlhsh_iface *iface;
@@ -1215,7 +1213,7 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
 				continue;
 			netlbl_af4list_foreach_rcu(addr4,
 						   &iface->addr4_list) {
-				if (iter_addr4++ < skip_addr4)
+				if (iter_addr4++ < cb->args[2])
 					continue;
 				if (netlbl_unlabel_staticlist_gen(
 					      NLBL_UNLABEL_C_STATICLIST,
@@ -1231,7 +1229,7 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
 #if IS_ENABLED(CONFIG_IPV6)
 			netlbl_af6list_foreach_rcu(addr6,
 						   &iface->addr6_list) {
-				if (iter_addr6++ < skip_addr6)
+				if (iter_addr6++ < cb->args[3])
 					continue;
 				if (netlbl_unlabel_staticlist_gen(
 					      NLBL_UNLABEL_C_STATICLIST,
@@ -1250,10 +1248,10 @@ static int netlbl_unlabel_staticlist(struct sk_buff *skb,
 
 unlabel_staticlist_return:
 	rcu_read_unlock();
-	cb->args[0] = skip_bkt;
-	cb->args[1] = skip_chain;
-	cb->args[2] = skip_addr4;
-	cb->args[3] = skip_addr6;
+	cb->args[0] = iter_bkt;
+	cb->args[1] = iter_chain;
+	cb->args[2] = iter_addr4;
+	cb->args[3] = iter_addr6;
 	return skb->len;
 }
 
@@ -1273,12 +1271,9 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
 {
 	struct netlbl_unlhsh_walk_arg cb_arg;
 	struct netlbl_unlhsh_iface *iface;
-	u32 skip_addr4 = cb->args[0];
-	u32 skip_addr6 = cb->args[1];
-	u32 iter_addr4 = 0;
+	u32 iter_addr4 = 0, iter_addr6 = 0;
 	struct netlbl_af4list *addr4;
 #if IS_ENABLED(CONFIG_IPV6)
-	u32 iter_addr6 = 0;
 	struct netlbl_af6list *addr6;
 #endif
 
@@ -1292,7 +1287,7 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
 		goto unlabel_staticlistdef_return;
 
 	netlbl_af4list_foreach_rcu(addr4, &iface->addr4_list) {
-		if (iter_addr4++ < skip_addr4)
+		if (iter_addr4++ < cb->args[0])
 			continue;
 		if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
 					      iface,
@@ -1305,7 +1300,7 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
 	}
 #if IS_ENABLED(CONFIG_IPV6)
 	netlbl_af6list_foreach_rcu(addr6, &iface->addr6_list) {
-		if (iter_addr6++ < skip_addr6)
+		if (iter_addr6++ < cb->args[1])
 			continue;
 		if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF,
 					      iface,
@@ -1320,8 +1315,8 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb,
 
 unlabel_staticlistdef_return:
 	rcu_read_unlock();
-	cb->args[0] = skip_addr4;
-	cb->args[1] = skip_addr6;
+	cb->args[0] = iter_addr4;
+	cb->args[1] = iter_addr6;
 	return skb->len;
 }
 
diff --git a/net/rds/message.c b/net/rds/message.c
index f0a4658..aff589c 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -197,6 +197,9 @@ struct rds_message *rds_message_alloc(unsigned int extra_len, gfp_t gfp)
 {
 	struct rds_message *rm;
 
+	if (extra_len > KMALLOC_MAX_SIZE - sizeof(struct rds_message))
+		return NULL;
+
 	rm = kzalloc(sizeof(struct rds_message) + extra_len, gfp);
 	if (!rm)
 		goto out;
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index cedd9bf..9ef5c73 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5653,6 +5653,9 @@ static int sctp_getsockopt_assoc_stats(struct sock *sk, int len,
 	if (len < sizeof(sctp_assoc_t))
 		return -EINVAL;
 
+	/* Allow the struct to grow and fill in as much as possible */
+	len = min_t(size_t, len, sizeof(sas));
+
 	if (copy_from_user(&sas, optval, len))
 		return -EFAULT;
 
@@ -5686,9 +5689,6 @@ static int sctp_getsockopt_assoc_stats(struct sock *sk, int len,
 	/* Mark beginning of a new observation period */
 	asoc->stats.max_obs_rto = asoc->rto_min;
 
-	/* Allow the struct to grow and fill in as much as possible */
-	len = min_t(size_t, len, sizeof(sas));
-
 	if (put_user(len, optlen))
 		return -EFAULT;
 
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 06ba4a7..e253917 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -8,7 +8,7 @@
 # ==========================================================================
 
 # called may set destination dir (when installing to asm/)
-_dst := $(or $(destination-y),$(dst),$(obj))
+_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
 
 # generated header directory
 gen := $(if $(gen),$(gen),$(subst include/,include/generated/,$(obj)))
@@ -48,13 +48,14 @@ all-files     := $(header-y) $(genhdr-y) $(wrapper-files)
 output-files  := $(addprefix $(installdir)/, $(all-files))
 
 input-files   := $(foreach hdr, $(header-y), \
-		   $(or \
+		   $(if $(wildcard $(srcdir)/$(hdr)), \
 			$(wildcard $(srcdir)/$(hdr)), \
-			$(wildcard $(oldsrcdir)/$(hdr)), \
-			$(error Missing UAPI file $(srcdir)/$(hdr)) \
+			$(if $(wildcard $(oldsrcdir)/$(hdr)), \
+				$(wildcard $(oldsrcdir)/$(hdr)), \
+				$(error Missing UAPI file $(srcdir)/$(hdr))) \
 		   )) \
 		 $(foreach hdr, $(genhdr-y), \
-		   $(or \
+		   $(if	$(wildcard $(gendir)/$(hdr)), \
 			$(wildcard $(gendir)/$(hdr)), \
 			$(error Missing generated UAPI file $(gendir)/$(hdr)) \
 		   ))
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 48665ec..8ab2951 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -310,7 +310,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx,
 
 	if (old_ctx) {
 		new_ctx = kmalloc(sizeof(*old_ctx) + old_ctx->ctx_len,
-				  GFP_KERNEL);
+				  GFP_ATOMIC);
 		if (!new_ctx)
 			return -ENOMEM;
 
diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c
index 160b1bd..24d44b2 100644
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -290,10 +290,10 @@ int snd_seq_timer_open(struct snd_seq_queue *q)
 			tid.device = SNDRV_TIMER_GLOBAL_SYSTEM;
 			err = snd_timer_open(&t, str, &tid, q->queue);
 		}
-		if (err < 0) {
-			snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
-			return err;
-		}
+	}
+	if (err < 0) {
+		snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
+		return err;
 	}
 	t->callback = snd_seq_timer_interrupt;
 	t->callback_data = q;
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index 8674b9e..fe1e66b 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -38,7 +38,7 @@
 #include <unistd.h>
 #include <tools/le_byteshift.h>
 
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
 
 
 /******************** Little Endian Handling ********************************/
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]