This is a note to let you know that I've just added the patch titled
USB: Fix connected device switch to Inactive state.
to the 3.8-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-fix-connected-device-switch-to-inactive-state.patch
and it can be found in the queue-3.8 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From sarah.a.sharp@xxxxxxxxxxxxxxx Tue Mar 12 14:59:14 2013
From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Date: Thu, 7 Mar 2013 16:23:43 -0800
Subject: USB: Fix connected device switch to Inactive state.
To: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Message-ID: <20130308002343.GA13329@xanatos>
From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
[This is upstream commit d3b9d7a9051d7024a93c76a84b2f84b3b66ad6d5.
It needs to be backported to kernels as old as 3.2, because it fixes the
buggy commit 65bdac5effd15d6af619b3b7218627ef4d84ed6a "USB: Handle warm
reset failure on empty port."]
A USB 3.0 device can transition to the Inactive state if a U1 or U2 exit
transition fails. The current code in hub_events simply issues a warm
reset, but does not call any pre-reset or post-reset driver methods (or
unbind/rebind drivers without them). Therefore the drivers won't know
their device has just been reset.
hub_events should instead call usb_reset_device. This means
hub_port_reset now needs to figure out whether it should issue a warm
reset or a hot reset.
Remove the FIXME note about needing disconnect() for a NOTATTACHED
device. This patch fixes that.
Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/core/hub.c | 30 +++++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2605,7 +2605,6 @@ static void hub_port_finish_reset(struct
case -ENODEV:
clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_C_RESET);
- /* FIXME need disconnect() for NOTATTACHED device */
if (hub_is_superspeed(hub->hdev)) {
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_BH_PORT_RESET);
@@ -2639,6 +2638,18 @@ static int hub_port_reset(struct usb_hub
* Some companion controllers don't like it when they mix.
*/
down_read(&ehci_cf_port_reset_rwsem);
+ } else if (!warm) {
+ /*
+ * If the caller hasn't explicitly requested a warm reset,
+ * double check and see if one is needed.
+ */
+ status = hub_port_status(hub, port1,
+ &portstatus, &portchange);
+ if (status < 0)
+ goto done;
+
+ if (hub_port_warm_reset_required(hub, portstatus))
+ warm = true;
}
/* Reset the port */
@@ -4730,12 +4741,21 @@ static void hub_events(void)
*/
if (hub_port_warm_reset_required(hub, portstatus)) {
int status;
+ struct usb_device *udev =
+ hub->ports[i - 1]->child;
dev_dbg(hub_dev, "warm reset port %d\n", i);
- status = hub_port_reset(hub, i, NULL,
- HUB_BH_RESET_TIME, true);
- if (status < 0)
- hub_port_disable(hub, i, 1);
+ if (!udev) {
+ status = hub_port_reset(hub, i,
+ NULL, HUB_BH_RESET_TIME,
+ true);
+ if (status < 0)
+ hub_port_disable(hub, i, 1);
+ } else {
+ usb_lock_device(udev);
+ status = usb_reset_device(udev);
+ usb_unlock_device(udev);
+ }
connect_change = 0;
}
Patches currently in stable-queue which might be from sarah.a.sharp@xxxxxxxxxxxxxxx are
queue-3.8/usb-don-t-use-ehci-port-sempahore-for-usb-3.0-hubs.patch
queue-3.8/usb-rip-out-recursive-call-on-warm-port-reset.patch
queue-3.8/usb-prepare-for-refactoring-by-adding-extra-udev-checks.patch
queue-3.8/usb-fix-connected-device-switch-to-inactive-state.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html