The patch below does not apply to the 3.8-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 7bf5b408b419fc849578e6e9fbd221bf43638eb6 Mon Sep 17 00:00:00 2001
From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Date: Wed, 30 Jan 2013 21:29:58 +0100
Subject: [PATCH] ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels
The ethernet controller used on kirkwood looses its MAC address
register contents when the corresponding clock is gated. As soon as
mv643xx_eth is built as module, the clock gets gated and when loading
the module, the MAC address is gone.
Proper DT support for the mv643xx_eth driver is expected soon, so we add
a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround
is also already used on non-DT kirkwood kernels.
Reported-by: Simon Baatz <gmbnomis@xxxxxxxxx>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Tested-by: Simon Baatz <gmbnomis@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Jason Cooper <jason@xxxxxxxxxxxxxx>
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 2e73e9d..d367aa6 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -41,16 +41,12 @@ static void __init kirkwood_legacy_clk_init(void)
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
-
struct of_phandle_args clkspec;
+ struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
- clkspec.args[0] = CGC_BIT_GE0;
- orion_clkdev_add(NULL, "mv643xx_eth_port.0",
- of_clk_get_from_provider(&clkspec));
-
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
@@ -59,9 +55,24 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
- clkspec.args[0] = CGC_BIT_GE1;
- orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+ clkspec.args[0] = CGC_BIT_SDIO;
+ orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by
+ * u-boot if the clocks are turned off. Until proper DT support
+ * is available we always enable them for now.
+ */
+ clkspec.args[0] = CGC_BIT_GE0;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+ clk_prepare_enable(clk);
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+ clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html