commit: 3412f2f086ea7531378fabe756bd4a1109994ae6 From: Felix Fietkau <nbd@xxxxxxxxxxx> Date: Mon, 25 Feb 2013 20:51:07 +0100 Subject: ath9k_hw: improve reset reliability after errors On many different chips, important aspects of the MAC state are not fully cleared by a warm reset. This can show up as tx/rx hangs, those annoying "DMA failed to stop in 10 ms..." messages or other quirks. On AR933x, the chip can occasionally get stuck in a way that only a driver unload/reload or a reboot would bring it back to life. With this patch, a full reset is issued when bringing the chip out of FULL-SLEEP state (after idle), or if either Rx or Tx was not shut down properly. This makes the DMA related error messages disappear completely in my tests on AR933x, and the chip does not get stuck anymore. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/hw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 42cf3c7..7b485e4 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1463,7 +1463,9 @@ static bool ath9k_hw_chip_reset(struct ath_hw *ah, reset_type = ATH9K_RESET_POWER_ON; else reset_type = ATH9K_RESET_COLD; - } + } else if (ah->chip_fullsleep || REG_READ(ah, AR_Q_TXE) || + (REG_READ(ah, AR_CR) & AR_CR_RXE)) + reset_type = ATH9K_RESET_COLD; if (!ath9k_hw_set_reset_reg(ah, reset_type)) return false; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html