This is a note to let you know that I've just added the patch titled
staging: comedi: ni_labpc: correct differential channel sequence for AI commands
to the 3.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
staging-comedi-ni_labpc-correct-differential-channel-sequence-for-ai-commands.patch
and it can be found in the queue-3.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From abbotti@xxxxxxxxx Fri Mar 1 11:18:44 2013
From: Ian Abbott <abbotti@xxxxxxxxx>
Date: Wed, 27 Feb 2013 12:52:45 +0000
Subject: staging: comedi: ni_labpc: correct differential channel sequence for AI commands
To: stable@xxxxxxxxxxxxxxx
Cc: Ian Abbott <abbotti@xxxxxxxxx>
Message-ID: <1361969566-32521-1-git-send-email-abbotti@xxxxxxxxx>
From: Ian Abbott <abbotti@xxxxxxxxx>
Commit 4c4bc25d0fa6beaf054c0b4c3b324487f266c820 upstream.
Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings. He tracked it down to two
problems, one of which is addressed by this patch.
It seems the setting of the channel bits for particular scanning modes
was incorrect for differential mode. (Only half the number of channels
are available in differential mode; comedi refers to them as channels 0,
1, 2 and 3, but the hardware documentation refers to them as channels 0,
2, 4 and 6.) In differential mode, the setting of the channel enable
bits in the command1 register should depend on whether the scan enable
bit is set. Effectively, we need to double the comedi channel number
when the scan enable bit is not set in differential mode. The scan
enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or
`MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is
`MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`. The existing test
for whether the comedi channel number needs to be doubled in
differential mode is incorrect in `labpc_ai_cmd()`. This patch corrects
the test.
Thanks to Tuomas for suggesting the fix.
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/staging/comedi/drivers/ni_labpc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1241,7 +1241,9 @@ static int labpc_ai_cmd(struct comedi_de
else
channel = CR_CHAN(cmd->chanlist[0]);
/* munge channel bits for differential / scan disabled mode */
- if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF)
+ if ((labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN ||
+ labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN_INTERVAL) &&
+ aref == AREF_DIFF)
channel *= 2;
devpriv->command1_bits |= ADC_CHAN_BITS(channel);
devpriv->command1_bits |= thisboard->ai_range_code[range];
Patches currently in stable-queue which might be from abbotti@xxxxxxxxx are
queue-3.0/staging-comedi-ni_labpc-set-up-command4-register-after-command3.patch
queue-3.0/staging-comedi-ni_labpc-correct-differential-channel-sequence-for-ai-commands.patch
queue-3.0/staging-comedi-check-s-async-for-poll-read-and-write.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html