Hi Roger,
On Wed, Feb 27, 2013 at 09:52:38AM +0200, Roger Quadros wrote:
> Hi Greg,
>
> On 02/27/2013 02:08 AM, Greg Kroah-Hartman wrote:
> > 3.4-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Roger Quadros <rogerq@xxxxxx>
> >
> > commit 428525f97153505e83983460a8d08a3210aa6b8a upstream.
> >
> > This driver does not request any gpios so don't free them.
> > Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
> > with ehci-omap in use.
>
> Please drop this patch from 3.4-stable.
>
> In 3.4, the driver requests the gpios in probe() so they must be freed
> in remove() and this patch should not be applied. Thanks.
I believe this is also true for the 3.5 kernels. Can you confirm this?
Cheers,
--
Luis
>
> cheers, -roger
>
> >
> > Without this patch, EHCI will break on repeated insmod/rmmod
> > of ehci_hcd for all OMAP2+ platforms that use EHCI and
> > set 'phy_reset = true' in usbhs_omap_board_data.
> > i.e.
> >
> > board-3430sdp.c: .phy_reset = true,
> > board-3630sdp.c: .phy_reset = true,
> > board-am3517crane.c: .phy_reset = true,
> > board-am3517evm.c: .phy_reset = true,
> > board-cm-t3517.c: .phy_reset = true,
> > board-cm-t35.c: .phy_reset = true,
> > board-devkit8000.c: .phy_reset = true,
> > board-igep0020.c: .phy_reset = true,
> > board-igep0020.c: .phy_reset = true,
> > board-omap3beagle.c: .phy_reset = true,
> > board-omap3evm.c: .phy_reset = true,
> > board-omap3pandora.c: .phy_reset = true,
> > board-omap3stalker.c: .phy_reset = true,
> > board-omap3touchbook.c: .phy_reset = true,
> > board-omap4panda.c: .phy_reset = false,
> > board-overo.c: .phy_reset = true,
> > board-zoom.c: .phy_reset = true,
> >
> > Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> > Reviewed-by: Felipe Balbi <balbi@xxxxxx>
> > Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> >
> > ---
> > drivers/usb/host/ehci-omap.c | 8 --------
> > 1 file changed, 8 deletions(-)
> >
> > --- a/drivers/usb/host/ehci-omap.c
> > +++ b/drivers/usb/host/ehci-omap.c
> > @@ -288,7 +288,6 @@ static int ehci_hcd_omap_remove(struct p
> > {
> > struct device *dev = &pdev->dev;
> > struct usb_hcd *hcd = dev_get_drvdata(dev);
> > - struct ehci_hcd_omap_platform_data *pdata = dev->platform_data;
> >
> > usb_remove_hcd(hcd);
> > disable_put_regulator(dev->platform_data);
> > @@ -297,13 +296,6 @@ static int ehci_hcd_omap_remove(struct p
> > pm_runtime_put_sync(dev);
> > pm_runtime_disable(dev);
> >
> > - if (pdata->phy_reset) {
> > - if (gpio_is_valid(pdata->reset_gpio_port[0]))
> > - gpio_free(pdata->reset_gpio_port[0]);
> > -
> > - if (gpio_is_valid(pdata->reset_gpio_port[1]))
> > - gpio_free(pdata->reset_gpio_port[1]);
> > - }
> > return 0;
> > }
> >
> >
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html