3.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
commit 25736e0c8269e9613aa6036fbc591818daa30d14 upstream.
This patch let glue driver return -EPROBE_DEFER if the transceiver
is not readly, so we can support defer probe on musb to fix the
below error on 3.7-rc5 if transceiver drivers are built as module:
[ 19.052490] unable to find transceiver of type USB2 PHY
[ 19.072052] HS USB OTG: no transceiver configured
[ 19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19
[ 19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19
[ 19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430'
[ 19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430
[ 19.174407] bus: 'platform': add driver twl4030_usb
[ 19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb
[ 19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb
[ 19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3
[ 19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready
[ 19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb'
[ 19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb
Cc: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/musb/am35x.c | 2 +-
drivers/usb/musb/blackfin.c | 2 +-
drivers/usb/musb/da8xx.c | 7 +++++--
drivers/usb/musb/davinci.c | 7 +++++--
drivers/usb/musb/musb_dsps.c | 2 +-
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/musb/tusb6010.c | 2 +-
drivers/usb/musb/ux500.c | 2 +-
8 files changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -365,7 +365,7 @@ static int am35x_musb_init(struct musb *
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
- return -ENODEV;
+ return -EPROBE_DEFER;
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -406,7 +406,7 @@ static int bfin_musb_init(struct musb *m
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
gpio_free(musb->config->gpio_vrsel);
- return -ENODEV;
+ return -EPROBE_DEFER;
}
bfin_musb_reg_init(musb);
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -410,6 +410,7 @@ static int da8xx_musb_init(struct musb *
{
void __iomem *reg_base = musb->ctrl_base;
u32 rev;
+ int ret = -ENODEV;
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
@@ -420,8 +421,10 @@ static int da8xx_musb_init(struct musb *
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv))
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ ret = -EPROBE_DEFER;
goto fail;
+ }
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
@@ -441,7 +444,7 @@ static int da8xx_musb_init(struct musb *
musb->isr = da8xx_musb_interrupt;
return 0;
fail:
- return -ENODEV;
+ return ret;
}
static int da8xx_musb_exit(struct musb *musb)
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -380,11 +380,14 @@ static int davinci_musb_init(struct musb
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
+ int ret = -ENODEV;
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv))
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ ret = -EPROBE_DEFER;
goto unregister;
+ }
musb->mregs += DAVINCI_BASE_OFFSET;
@@ -438,7 +441,7 @@ fail:
usb_put_phy(musb->xceiv);
unregister:
usb_nop_xceiv_unregister();
- return -ENODEV;
+ return ret;
}
static int davinci_musb_exit(struct musb *musb)
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -419,7 +419,7 @@ static int dsps_musb_init(struct musb *m
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
- return -ENODEV;
+ return -EPROBE_DEFER;
/* Returns zero if e.g. not clocked */
rev = dsps_readl(reg_base, wrp->revision);
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -369,7 +369,7 @@ static int omap2430_musb_init(struct mus
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
pr_err("HS USB OTG: no transceiver configured\n");
- return -ENODEV;
+ return -EPROBE_DEFER;
}
musb->isr = omap2430_musb_interrupt;
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1069,7 +1069,7 @@ static int tusb_musb_init(struct musb *m
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
- return -ENODEV;
+ return -EPROBE_DEFER;
pdev = to_platform_device(musb->controller);
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -61,7 +61,7 @@ static int ux500_musb_init(struct musb *
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
pr_err("HS USB OTG: no transceiver configured\n");
- return -ENODEV;
+ return -EPROBE_DEFER;
}
musb->isr = ux500_musb_interrupt;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html