Patch "usb: musb: fix dependency on transceiver driver" has been added to the 3.8-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    usb: musb: fix dependency on transceiver driver

to the 3.8-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-musb-fix-dependency-on-transceiver-driver.patch
and it can be found in the queue-3.8 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 25736e0c8269e9613aa6036fbc591818daa30d14 Mon Sep 17 00:00:00 2001
From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
Date: Fri, 4 Jan 2013 23:13:58 +0800
Subject: usb: musb: fix dependency on transceiver driver

From: Ming Lei <ming.lei@xxxxxxxxxxxxx>

commit 25736e0c8269e9613aa6036fbc591818daa30d14 upstream.

This patch let glue driver return -EPROBE_DEFER if the transceiver
is not readly, so we can support defer probe on musb to fix the
below error on 3.7-rc5 if transceiver drivers are built as module:

[   19.052490] unable to find transceiver of type USB2 PHY
[   19.072052] HS USB OTG: no transceiver configured
[   19.076995] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -19
[   19.089355] musb-hdrc: probe of musb-hdrc.0.auto rejects match -19
[   19.096771] driver: 'musb-omap2430': driver_bound: bound to device 'musb-omap2430'
[   19.105194] bus: 'platform': really_probe: bound device musb-omap2430 to driver musb-omap2430
[   19.174407] bus: 'platform': add driver twl4030_usb
[   19.179656] bus: 'platform': driver_probe_device: matched device twl4030_usb with driver twl4030_usb
[   19.202270] bus: 'platform': really_probe: probing driver twl4030_usb with device twl4030_usb
[   19.214172] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3
[   19.239624] musb-omap2430 musb-omap2430: musb core is not yet ready
[   19.246765] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[   19.254516] driver: 'twl4030_usb': driver_bound: bound to device 'twl4030_usb'
[   19.263580] bus: 'platform': really_probe: bound device twl4030_usb to driver twl4030_usb

Cc: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
Signed-off-by: Ming Lei <ming.lei@xxxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/musb/am35x.c     |    2 +-
 drivers/usb/musb/blackfin.c  |    2 +-
 drivers/usb/musb/da8xx.c     |    7 +++++--
 drivers/usb/musb/davinci.c   |    7 +++++--
 drivers/usb/musb/musb_dsps.c |    2 +-
 drivers/usb/musb/omap2430.c  |    2 +-
 drivers/usb/musb/tusb6010.c  |    2 +-
 drivers/usb/musb/ux500.c     |    2 +-
 8 files changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -365,7 +365,7 @@ static int am35x_musb_init(struct musb *
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv))
-		return -ENODEV;
+		return -EPROBE_DEFER;
 
 	setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -406,7 +406,7 @@ static int bfin_musb_init(struct musb *m
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		gpio_free(musb->config->gpio_vrsel);
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	bfin_musb_reg_init(musb);
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -410,6 +410,7 @@ static int da8xx_musb_init(struct musb *
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev;
+	int ret = -ENODEV;
 
 	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
 
@@ -420,8 +421,10 @@ static int da8xx_musb_init(struct musb *
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(musb->xceiv))
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		ret = -EPROBE_DEFER;
 		goto fail;
+	}
 
 	setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
 
@@ -441,7 +444,7 @@ static int da8xx_musb_init(struct musb *
 	musb->isr = da8xx_musb_interrupt;
 	return 0;
 fail:
-	return -ENODEV;
+	return ret;
 }
 
 static int da8xx_musb_exit(struct musb *musb)
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -380,11 +380,14 @@ static int davinci_musb_init(struct musb
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
+	int 		ret = -ENODEV;
 
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
-	if (IS_ERR_OR_NULL(musb->xceiv))
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
+		ret = -EPROBE_DEFER;
 		goto unregister;
+	}
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
@@ -438,7 +441,7 @@ fail:
 	usb_put_phy(musb->xceiv);
 unregister:
 	usb_nop_xceiv_unregister();
-	return -ENODEV;
+	return ret;
 }
 
 static int davinci_musb_exit(struct musb *musb)
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -419,7 +419,7 @@ static int dsps_musb_init(struct musb *m
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv))
-		return -ENODEV;
+		return -EPROBE_DEFER;
 
 	/* Returns zero if e.g. not clocked */
 	rev = dsps_readl(reg_base, wrp->revision);
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -369,7 +369,7 @@ static int omap2430_musb_init(struct mus
 	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	musb->isr = omap2430_musb_interrupt;
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1069,7 +1069,7 @@ static int tusb_musb_init(struct musb *m
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv))
-		return -ENODEV;
+		return -EPROBE_DEFER;
 
 	pdev = to_platform_device(musb->controller);
 
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -61,7 +61,7 @@ static int ux500_musb_init(struct musb *
 	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	musb->isr = ux500_musb_interrupt;


Patches currently in stable-queue which might be from ming.lei@xxxxxxxxxxxxx are

queue-3.8/usb-musb-core-fix-failure-path.patch
queue-3.8/usb-musb-fix-dependency-on-transceiver-driver.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]