This is a note to let you know that I've just added the patch titled
pinctrl: cy8c95x0: Rename PWMSEL to SELPWM
to the 6.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pinctrl-cy8c95x0-rename-pwmsel-to-selpwm.patch
and it can be found in the queue-6.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit e3e88b5137a2e5fe7cd0ec0cb420a155d0fb56cb
Author: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Date: Mon Feb 3 15:10:30 2025 +0200
pinctrl: cy8c95x0: Rename PWMSEL to SELPWM
[ Upstream commit 0a7404fc5399e1100b14e7e2a4af2e4fd5e3b602 ]
There are two registers in the hardware, one, "Select PWM",
is per-port configuration enabling PWM function instead of GPIO.
The other one is "PWM Select" is per-PWM selector to configure
PWM itself. Original code uses abbreviation of the latter
to describe the former. Rename it to follow the datasheet.
Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/20250203131506.3318201-5-andriy.shevchenko@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c
index bfa16f70e29ce..75100a9fb8e4c 100644
--- a/drivers/pinctrl/pinctrl-cy8c95x0.c
+++ b/drivers/pinctrl/pinctrl-cy8c95x0.c
@@ -42,7 +42,7 @@
#define CY8C95X0_PORTSEL 0x18
/* Port settings, write PORTSEL first */
#define CY8C95X0_INTMASK 0x19
-#define CY8C95X0_PWMSEL 0x1A
+#define CY8C95X0_SELPWM 0x1A
#define CY8C95X0_INVERT 0x1B
#define CY8C95X0_DIRECTION 0x1C
/* Drive mode register change state on writing '1' */
@@ -369,8 +369,8 @@ static bool cy8c95x0_volatile_register(struct device *dev, unsigned int reg)
case CY8C95X0_INPUT_(0) ... CY8C95X0_INPUT_(7):
case CY8C95X0_INTSTATUS_(0) ... CY8C95X0_INTSTATUS_(7):
case CY8C95X0_INTMASK:
+ case CY8C95X0_SELPWM:
case CY8C95X0_INVERT:
- case CY8C95X0_PWMSEL:
case CY8C95X0_DIRECTION:
case CY8C95X0_DRV_PU:
case CY8C95X0_DRV_PD:
@@ -399,7 +399,7 @@ static bool cy8c95x0_muxed_register(unsigned int reg)
{
switch (reg) {
case CY8C95X0_INTMASK:
- case CY8C95X0_PWMSEL:
+ case CY8C95X0_SELPWM:
case CY8C95X0_INVERT:
case CY8C95X0_DIRECTION:
case CY8C95X0_DRV_PU:
@@ -797,7 +797,7 @@ static int cy8c95x0_gpio_get_pincfg(struct cy8c95x0_pinctrl *chip,
reg = CY8C95X0_DIRECTION;
break;
case PIN_CONFIG_MODE_PWM:
- reg = CY8C95X0_PWMSEL;
+ reg = CY8C95X0_SELPWM;
break;
case PIN_CONFIG_OUTPUT:
reg = CY8C95X0_OUTPUT;
@@ -876,7 +876,7 @@ static int cy8c95x0_gpio_set_pincfg(struct cy8c95x0_pinctrl *chip,
reg = CY8C95X0_DRV_PP_FAST;
break;
case PIN_CONFIG_MODE_PWM:
- reg = CY8C95X0_PWMSEL;
+ reg = CY8C95X0_SELPWM;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
return cy8c95x0_pinmux_direction(chip, off, !arg);
@@ -1161,7 +1161,7 @@ static void cy8c95x0_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *
bitmap_zero(mask, MAX_LINE);
__set_bit(pin, mask);
- if (cy8c95x0_read_regs_mask(chip, CY8C95X0_PWMSEL, pwm, mask)) {
+ if (cy8c95x0_read_regs_mask(chip, CY8C95X0_SELPWM, pwm, mask)) {
seq_puts(s, "not available");
return;
}
@@ -1206,7 +1206,7 @@ static int cy8c95x0_set_mode(struct cy8c95x0_pinctrl *chip, unsigned int off, bo
u8 port = cypress_get_port(chip, off);
u8 bit = cypress_get_pin_mask(chip, off);
- return cy8c95x0_regmap_write_bits(chip, CY8C95X0_PWMSEL, port, bit, mode ? bit : 0);
+ return cy8c95x0_regmap_write_bits(chip, CY8C95X0_SELPWM, port, bit, mode ? bit : 0);
}
static int cy8c95x0_pinmux_mode(struct cy8c95x0_pinctrl *chip,
