Patch "arm64: dts: qcom: pm6150l: add temp sensor and thermal zone config" has been added to the 6.1-stable tree

[Sasha Levin <sashal@xxxxxxxxxx>]

This is a note to let you know that I've just added the patch titled

    arm64: dts: qcom: pm6150l: add temp sensor and thermal zone config

to the 6.1-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm64-dts-qcom-pm6150l-add-temp-sensor-and-thermal-z.patch
and it can be found in the queue-6.1 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.



commit c884987db03b9b17c57fc717b2135b80515a83ea
Author: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Date:   Fri Oct 28 09:54:05 2022 +0200

    arm64: dts: qcom: pm6150l: add temp sensor and thermal zone config
    
    [ Upstream commit ce1b5eb74b3ef042b1c797f04e8683e7cad34ae6 ]
    
    Add temp-alarm device tree node and a default configuration for the
    corresponding thermal zone for this PMIC. Temperatures are based on
    downstream values, except for trip2 where 125°C is used instead of 145°C
    due to limitations without a configured ADC.
    
    Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
    Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
    Link: https://lore.kernel.org/r/20221028075405.124809-2-luca.weiss@xxxxxxxxxxxxx
    Stable-dep-of: 9180b38d706c ("arm64: dts: qcom: sc7180-trogdor-pompom: rename 5v-choke thermal zone")
    Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index 06d729ff65a9d..ac3c6456c47c7 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -5,6 +5,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm6150l-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm6150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm6150l_lsid4: pmic@4 {
 		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
@@ -12,6 +43,13 @@ pm6150l_lsid4: pmic@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm6150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm6150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;