This is a note to let you know that I've just added the patch titled
ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-microchip-sama5d27_wlsom1_ek-remove-mmc-ddr-.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 1acadb117915ac4857ba094ba9543afcfb667075
Author: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
Date: Mon Dec 4 09:25:37 2023 +0200
ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
[ Upstream commit 2a7f1848d9d65a4deb366726ff8f33c9c64ac43b ]
On board the sdmmc0 interface is wired to a SD Card socket.
According with mmc-controller bindings, the mmc-ddr-3_3v property
is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
Remove the mmc-ddr-3_3v property from sdmmc0 node.
Signed-off-by: Mihai Sain <mihai.sain@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20231204072537.2991-1-mihai.sain@xxxxxxxxxxxxx
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
Stable-dep-of: 4d9e5965df04 ("ARM: dts: microchip: sama5d27_wlsom1_ek: Add no-1-8-v property to sdmmc0 node")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index e055b9e2fe344..15239834d886e 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
@@ -197,7 +197,6 @@ qspi1_flash: flash@0 {
&sdmmc0 {
bus-width = <4>;
- mmc-ddr-3_3v;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc0_default>;
status = "okay";
