This is a note to let you know that I've just added the patch titled
arm64: dts: qcom: sa8775p-ride: Describe sgmii_phy0 irq
to the 6.6-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-qcom-sa8775p-ride-describe-sgmii_phy0-irq.patch
and it can be found in the queue-6.6 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit d38cd7861603b035a896612e56a992744d02ebba
Author: Andrew Halaney <ahalaney@xxxxxxxxxx>
Date: Thu Aug 17 16:37:16 2023 -0500
arm64: dts: qcom: sa8775p-ride: Describe sgmii_phy0 irq
[ Upstream commit 1ff6569b0ffe7a2e311104cb3cd841983e484ac9 ]
There's an irq hooked up, so let's describe it.
Prior to commit 9757300d2750
("pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets")
one would not see the IRQ fire, despite some (invasive) debugging
showing that the GPIO was in fact asserted, resulting in the interface
staying down.
Now that the IRQ is properly routed we can describe it.
Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230817213815.638189-2-ahalaney@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Stable-dep-of: 30f7dfd2c489 ("arm64: dts: qcom: sa8775p: Update sleep_clk frequency")
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 81a7eeb9cfcd2..8fde6935cd6ec 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -285,6 +285,7 @@ sgmii_phy0: phy@8 {
compatible = "ethernet-phy-id0141.0dd4";
reg = <0x8>;
device_type = "ethernet-phy";
+ interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
reset-assert-us = <11000>;
reset-deassert-us = <70000>;
