This is a note to let you know that I've just added the patch titled
arm64: dts: mediatek: mt8186: Move wakeup to MTU3 to get working suspend
to the 6.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm64-dts-mediatek-mt8186-move-wakeup-to-mtu3-to-get.patch
and it can be found in the queue-6.13 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
commit 58e04d867851c05e9161fdd926d5431308991af3
Author: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Date: Wed Nov 6 16:01:45 2024 -0500
arm64: dts: mediatek: mt8186: Move wakeup to MTU3 to get working suspend
[ Upstream commit 253b4e96f5783fddede1b82274a7b4e0aa57d761 ]
The current DT has the wakeup-source and mediatek,syscon-wakeup
properties in the XHCI nodes, which configures USB wakeup after powering
down the XHCI hardware block. However, since the XHCI controller is
behind an MTU3 (USB3 DRD controller), the MTU3 only gets powered down
after USB wakeup has been configured, causing the system to detect a
wakeup, and results in broken suspend support as the system resumes
immediately.
Move the wakeup properties to the MTU3 nodes so that USB wakeup is only
enabled after the MTU3 has powered down.
With this change in place, it is possible to suspend and resume, and
also to wakeup through USB, as tested on the Google Steelix (Lenovo 300e
Yoga Chromebook Gen 4).
Fixes: f6c3e61c5486 ("arm64: dts: mediatek: mt8186: Add MTU3 nodes")
Reported-by: Wojciech Macek <wmacek@xxxxxxxxxx>
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20241106-mt8186-suspend-with-usb-wakeup-v1-1-07734a4c8236@xxxxxxxxxxxxx
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index d3c3c2a40adcd..b91f88ffae0e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -1577,6 +1577,8 @@ ssusb0: usb@11201000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ wakeup-source;
+ mediatek,syscon-wakeup = <&pericfg 0x420 2>;
status = "disabled";
usb_host0: usb@11200000 {
@@ -1590,8 +1592,6 @@ usb_host0: usb@11200000 {
<&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
- mediatek,syscon-wakeup = <&pericfg 0x420 2>;
- wakeup-source;
status = "disabled";
};
};
@@ -1643,6 +1643,8 @@ ssusb1: usb@11281000 {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+ wakeup-source;
+ mediatek,syscon-wakeup = <&pericfg 0x424 2>;
status = "disabled";
usb_host1: usb@11280000 {
@@ -1656,8 +1658,6 @@ usb_host1: usb@11280000 {
<&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_XHCI>;
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck","xhci_ck";
interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>;
- mediatek,syscon-wakeup = <&pericfg 0x424 2>;
- wakeup-source;
status = "disabled";
};
};
